Course Title: Select and install roof sheeting and wall cladding

Part B: Course Detail

Teaching Period: Term1 2015

Course Code: BUIL6278C

Course Title: Select and install roof sheeting and wall cladding

School: 130T Vocational Engineering

Campus: City Campus

Program: C3312 - Certificate III in Plumbing

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vocengineering@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Program Manager - Warren James
Tel: +61 3 9925 4632
Email: warren.james@rmit.edu.au

Nominal Hours: 16

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

CPCPCM2043A Carry out WHS requirements

Course Description

This unit of competency specifies the outcomes required to select and install roof sheeting, steel battens and wall cladding for roofs. It includes the selection and installation of non-metallic roof materials associated with metal roofing (excluding roof tiles and slate) and of insulation materials.

In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

CPCPRF2022A Select and install roof sheeting and wall cladding

Element:

1. Prepare for work.

Performance Criteria:

1.1 Plans and specifications are obtained from site inspection.
1.2 Work health and safety (WHS) and environmental requirements selecting and installing roof sheeting and wall cladding are adhered to throughout the work.
1.3 Quality assurance requirements are identified and adhered to according to workplace requirements.
1.4 Tasks are planned and sequenced in conjunction with others involved in or affected by the work and statutory and regulatory authorities’ requirements.
1.5 Tools and equipment, including personal protective equipment, are selected and checked for serviceability.
1.6 Work area is prepared to support efficient selection and installation of roof sheeting and wall cladding.

Element:

2. Identify insulation requirements.

Performance Criteria:

2.1 Level of insulation from rain and other noise, condensation control and heat transfer reduction is determined.
2.2 Installation method, insulation supports and insulation materials are identified to meet performance requirements, plans, specifications, regulatory authorities' requirements and relevant information.
2.3 Quantity and type of insulation materials required are calculated from design drawings and specifications in compliance with local authorities' requirements.

Element:

3. Select sheeting, cladding and non-metallic materials.

Performance Criteria:

3.1 Appropriate roof sheeting and wall cladding are identified to comply with design specifications.
3.2 Quantity and type of manufactured roof coverings and/or fittings required are calculated from design drawings and specifications in compliance with local authorities’ requirements.
3.3 Manufactured non-metallic roof materials are identified from plans and specifications and verified as compliant with design requirements and regulatory authorities’ requirements.
3.4 Proposed roof and wall coverings, sealant, non-metallic materials, fixing materials, roofing and catchments are selected and checked for compatibility.
3.5 Materials, including insulation, are identified, ordered and collected according to workplace procedures.
3.6 Materials and equipment are checked for compliance with docket and order form and for acceptable condition, and faults are reported.

Element:

4. Install roof sheeting or wall cladding.

Performance Criteria:

4.1 Safety mesh and thermal insulation are fixed according to relevant Australian standards, job specification and manufacturer requirements.
4.2 Sheets are marked and trimmed prior to fixing and cut edges are treated according to manufacturer specifications.
4.3 Sheets, cladding and non-metallic materials are fixed in compliance with relevant Australian standards and manufacturer specifications.
4.4 Sustainability principles and concepts are applied throughout the installation.

Element:

5. Clean up.

Performance Criteria:

5.1 Work area is cleared and materials disposed of, reused or recycled according to legislation, regulations, codes of practice and job specification.
5.2 Tools and equipment are cleaned, checked, maintained and stored according to manufacturer recommendations and workplace procedures.
5.3 Documentation is completed according to workplace requirements.


Learning Outcomes


Refer to Elements


Details of Learning Activities

Learning activities include in class workbook activities and researching industry practices and standards. This may include online learning activities. Students are expected to undertake design, size and documentation to relevant industry standards to include sustainability and WHS principles.


Teaching Schedule

Week beginning/SessionTopicLearning Activities/ResourcesElements/ Performance criteriaAssessments
Session 1

Theory

 Select & Install roof sheeting & wall cladding

Pearson Basic plumbing
Services Skills
Roof Plumbing
  
Session 1 cont’dUnderpinning questions & SWMSStudents ccomplete underpinning questions & SWMS in student recording book 

 1 – 5

1.1 – 5.3

 Assessment 1 submit student work book & Under pinning questions

Session 2

Practical Task 

Install  deck roof

 Job: 79 Students are required to install 4 square meters of deck roof with concealed fixings including soaker flashings, sheet the parapet wall with corrugated sheet; manufacture and install parapet flashings to suite the workstation.


Job: 80 Students are required to install 2 square meters of corrugated zinc roof & 2 square meters of poly carbonate roof with pierced fixings including soaker flashings, apron flashings & step flashings.

 1 – 5

1.1 – 5.3

 Practical Tasks per AS/HB3900 roofing requirments
     


Learning Resources

Prescribed Texts

There are no prescribed textbooks. Class notes (workbook) will be provided to all students enrolled in this unit.


References

Relevant standards and codes of practices


Other Resources


Overview of Assessment

Students must pass each of the following assessment tasks to demonstrate competent. 

Assessment

Task 1

Workbook Activities

Task 2

Project 1

Task 3

Project 2


These tasks assesses the following Course Learning Outcomes (CLOs): 

Assessment Mapping Matrix 

Element /

Performance Criteria Covered

Task 1

 

Task 2

 

Task 3

 

1.1

X

X

X

1.2

X

X

X

1.3

X

X

X

1.4

X

X

X

1.5

X

X

X

1.6

X

X

X

2.1

X

X

X

2.2

X

X

X

2.3

X

X

X

3.1

X

X

X

3.2

X

X

X

3.3

X

X

X

3.4

X

X

X

3.5

X

X

X

3.6

X

X

X

4.1

X

X

X

4.2

X

X

X

4.3

X

X

X

4.4

X

X

X

5.1

 

X

X

5.2

 

X

X

5.3

 

X

X

To be deemed competent you must demonstrate an understanding of all aspects required of the competency. Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks.


Assessment Tasks

Students are required to complete three different types of assessment tasks
1. Workbook activities as evidence of classroom participation ( 20% weighing)
2.Students are required to install 4 square meters of deck roof with concealed fixings including soaker flashings, sheet the parapet wall with corrugated sheet; manufacture and install parapet flashings to suite the workstation. ( 40% weighing)
3. Students are required to install 2 square meters of corrugated zinc roof & 2 square meters of poly carbonate roof with pierced fixings including soaker flashings, apron flashings & step flashings.(40% weighing).

To successfully complete this unit, a student needs to be deemed competent (CA grade) in all three assessment tasks.
Grading Criteria:
NYC - Not yet competent
CA - Competence Achieved
DNS - Did not submit assessment


Assessment Matrix


Assessment Matrix

Assessment Task Element/ PC Percentage Weighting

Workbook Activities Element 1-5 / 1.1 – 5.3 20%
Project 1 Element 1-5/ 1.1 – 5.3 40%
Project 2 Element 1-5/ 1.1-5.3 40%

Other Information

Academic Misconduct

Students are reminded that cheating, whether by fabrication, falsification of data, or plagiarism, is an offence subject to University disciplinary procedures. Plagiarism in oral or written presentations is the presentation of the work, idea or creation of another person, without appropriate referencing, as though it is one’s own. Plagiarism is not acceptable.
The use of another person’s work or ideas must be acknowledged. Failure to do so may result in charges of academic misconduct which carry a range of penalties including cancellation of results and exclusion from your course.
Students are responsible for ensuring that their work is kept in a secure place. It is also a disciplinary offence for students to allow their work to be plagiarized by another student.
Students should be aware of their rights and responsibilities regarding the use of copyright material. It is strongly recommended that students refer to the Guidelines for Students at the RMIT University Homepage.

Course Overview: Access Course Overview