Course Title: Fabricate and install roof drainage components

Part B: Course Detail

Teaching Period: Term1 2015

Course Code: BUIL6279C

Course Title: Fabricate and install roof drainage components

School: 130T Vocational Engineering

Campus: City Campus

Program: C3312 - Certificate III in Plumbing

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vocengineering@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Program Manager - Warren James
Tel: +61 3 9925 4468
Email: warren.james@rmit.edu.au

Nominal Hours: 48

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

CPCPCM2043A Carry out WHS requirements

Course Description

This unit of competency specifies the outcomes required to fabricate and install roof drainage components and rainwater goods for commercial and residential roof systems.

In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

CPCPRF3022A Fabricate and install roof drainage components

Element:

1. Prepare for work.

Performance Criteria:

1.1 Plans and specifications are obtained and confirmed by site inspection.
1.2 Work health and safety (WHS) and environmental requirements associated with fabricating and installing roof drainage components are adhered to throughout the work.
1.3 Quality assurance requirements are identified and adhered to according to workplace requirements.
1.4 Tasks are planned and sequenced in conjunction with others involved in or affected by the work and statutory and regulatory authorities’ requirements.
1.5 Tools and equipment, including personal protective equipment, are selected and checked for serviceability.
1.6 Work area is prepared to support the fabrication and installation of roof drainage components.

Element:

2. Identify installation requirements.

Performance Criteria:

2.1 Rainwater management system is identified as suitable for preventing rainwater penetration into building structure.
2.2 Roof drainage components required for installation are identified from drawings and specifications.
2.3 Fabrication patterns are drawn based on design and freehand sketch of roof drainage.
2.4 Quantity, type and sizing of drainage components, rainwater materials and accessories required are calculated from drawings and specifications in compliance with relevant Australian standards, local authorities' requirements and relevant information.
2.5 Box gutter support system is fabricated according to relevant Australian standard.
2.6 Materials are identified from drawings, specifications, patterns and/or calculations and ordered and collected according to workplace procedures.
2.7 Materials and equipment are checked for compliance with docket and order form and for acceptable condition, and faults are reported.

Element:

3. Fabricate roof drainage components.

Performance Criteria:

3.1 Method of fabrication, tools and machinery requirements are determined to suit job requirements.
3.2 Materials are marked out from drawings to fabricate roof drainage components.
3.3 Roof drainage components are fabricated in compliance with relevant Australian standards, drawings, specifications and site measurements.
3.4 Components are marked, packaged and prepared for delivery and installation according to workplace procedures.

Element:

4. Set out and install roof drainage components.

Performance Criteria:

4.1 Components are checked for compliance with docket and order form and for acceptable condition, and arranged in order of installation.
4.2 Roof drainage components are set out to comply with job specifications and site measurements.
4.3 Structural supports are installed in compliance with job specifications.
4.4 Roof drainage components are jointed in compliance with job specifications and relevant Australian standards.
4.5 Roof drainage system is installed according to relevant Australian standards and job specifications.
4.6 Sustainability principles and concepts are applied throughout the installation.
4.7 System is performance tested for satisfactory installation and remedied.

Element:

5. Clean up.

Performance Criteria:

5.1 Work area is cleared and materials disposed of, reused or recycled according to legislation, regulations, codes of practice and job specification.
5.2 Tools and equipment are cleaned, checked, maintained and stored according to manufacturer recommendations and workplace procedures.
5.3 Documentation is completed according to workplace requirements.


Learning Outcomes


Refer to Elements


Details of Learning Activities

Learning activities include in class workbook activities and researching industry practices and standards.
This may include online learning activities.
Students are expected to undertake design, size and documentation to relevant industry standards to include sustainability and WHS principles.


Teaching Schedule

This unit is delivered over 2 sessions

Session NumberTopic                                  Learning Activities/ResourceElements/Performance criteriaAssessments                  
1  Pearsons roof plumbing chap 10.1.1, 1.3, 1.4, 1.5, 1.6. 
1 cont’dSwms, Underpinnings, Formative tasksStudents complete Swms, underpinning questions in student recording book.1.2, 2.1, .2., 2.3, 2.4, 2.5, 2.6, 2.7.Assessment 1- Submit Swms, work book, underpinning questions.
2Practical task- Fabricate and install roof drainage componentsStudents Fabricate and install roof drainage components using tools and equipment in workshop. Student recording book required for self assessment.3.1, 3.2, 3.3, 3.4,4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 5.1, 5.2, 5.3Assessment 2- Practical installation of task 70, 71, 72, 73, 74, 75, 76, 77, 78.
     


Learning Resources

Prescribed Texts


References


Other Resources

HB39


Overview of Assessment

Students must pass each of the following assessment tasks to demonstrate competent. 

Assessment

Task 1

Workbook Activities

Task 2

Practical


These tasks assesses the following Course Learning Outcomes (CLOs): 

Assessment Mapping Matrix 

Elements/

Performance Criteria Covered

Task 1

 

Task 2

 

1.1

X

X

1.2

X

X

1.3

X

X

1.4

X

X

1.5

X

X

1.6

X

X

2.1

X

X

2.2

X

X

2.3

X

X

2.4

X

X

2.5

X

X

2.6

X

X

2.7

X

X

3.1

X

X

3.2

X

X

3.3

X

X

3.4

X

X

4.1

X

X

4.2

X

X

4.3

X

X

4.4

X

X

4.5

X

X

4.6

X

X

4.7

X

X

5.1

 

X

5.2

 

X

5.3

 

X

 

To be deemed competent you must demonstrate an understanding of all aspects required of the competency. Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks.


Assessment Tasks

Students are required to complete 2 different types of assessment tasks
Assessment 1- Submit workbook underpinning questions and completed Swms (weighting 30%)
Assessment 2- Practical installationof tasks 70, 71, 72, 73, 74, 75, 76, 77, 78. (weighting 70%)
To successfully complete this unit, a student needs to be deemed competent (CA grade) in both assessment tasks.
Grading Criteria:
NYC - Not yet competent
CA - Competence Achieved
DNS - Did not submit assessment


Assessment Matrix

Assessment taskElement/PC                                   Percentage weighting
Assessment 1- Written tasks from workbook1.1, 1.3, 1.4, 1.5, 1.6, 1.2, 2.1, .2., 2.3, 2.4, 2.5, 2.6, 2.7. 
Assessment 2- Practical installation of 70, 71, 72, 73, 74, 75, 76, 77, 78.3.1, 3.2, 3.3, 3.4,4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 5.1, 5.2, 5.3 

Other Information

Academic Misconduct
Students are reminded that cheating, whether by fabrication, falsification of data, or plagiarism, is an offence subject to University disciplinary procedures. Plagiarism in oral or written presentations is the presentation of the work, idea or creation of another person, without appropriate referencing, as though it is one’s own. Plagiarism is not acceptable.
The use of another person’s work or ideas must be acknowledged. Failure to do so may result in charges of academic misconduct which carry a range of penalties including cancellation of results and exclusion from your course.
Students are responsible for ensuring that their work is kept in a secure place. It is also a disciplinary offence for students to allow their work to be plagiarized by another student.
Students should be aware of their rights and responsibilities regarding the use of copyright material. It is strongly recommended that students refer to the Guidelines for Students at the RMIT University Homepage.

Course Overview: Access Course Overview