Course Title: Work safely
Part B: Course Detail
Teaching Period: Term1 2018
Course Code: OHTH5963C
Course Title: Work safely
School: 350T Fashion & Textiles
Campus: Brunswick Campus
Program: C4389 - Certificate IV in Custom-Made Footwear
Course Contact: Tallal Khan
Course Contact Phone: +61 3 99259118
Course Contact Email: tallal.khan@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Andrew Robinson
+61 3 9925 9252
Nominal Hours: 30
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
None
Course Description
You will develop skills and knowledge required to apply workplace policies and procedures to maintain a safe work environment for self and others. Communication skills and understanding are also required to interpret and understand what is required to provide a safe workplace. This unit also requires the ability to use initiative and enterprise and problem solving strategies to identify and act upon hazards and risks within the workplace.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
MSMWHS200 Work safely |
Element: |
1. Identify hazards and assess risk |
Performance Criteria: |
1.1 Identify hazards in the work area before and during work 1.2 Access and apply relevant material safety data sheets (MSDS) 1.3 Assess risks for the identified hazards 1.4 Identify controls for these hazards from procedures 1.5 Review effectiveness of controls within the scope of authority 1.6 Identify and report remaining risk |
Element: |
2. Follow procedures for risk control |
Performance Criteria: |
2.1 Control risks when working under minimal supervision by following workplace procedures 2.2 Follow safety signs and other safety indicators/zones 2.3 Select, use and maintain relevant personal protective equipment (PPE) 2.4 Handle and store items/materials relevant to job safely |
Element: |
3. Follow emergency procedures |
Performance Criteria: |
3.1 Recognise emergency situations 3.2 Take appropriate initial emergency action 3.3 Follow procedures for dealing with a range of site/plant emergencies |
Element: |
4. Initiate suggestions to enhance task/ job-specific safety |
Performance Criteria: |
4.1 Raise WHS issues with designated personnel in accordance with workplace procedures and relevant requirements of WHS legislation 4.2 Contribute to participative arrangements for WHS management in the workplace within organisation procedures and the scope of responsibilities and competencies 4.3 Provide input to minimise hazards in work area in line with organisation WHS procedures 4.4 Provide input to opportunities for development of work group and competencies in relation to WHS 4.5 Support the implementation of procedures to control risks using the hierarchy of control and in accordance with organisation procedures 4.6 Report to appropriate people in accordance with workplace procedures when non-routine hazards arise |
Element: |
5. Apply knowledge of WHS legislation and the organisation WHS policies and procedures |
Performance Criteria: |
5.1 Follow workplace procedures to achieve a safe working environment in accordance with all relevant WHS legislation/regulation, including codes of practice relating to particular hazards within the workplace or industry 5.2 Identify the rights and responsibilities of employees and employers under the relevant WHS legislation 5.3 Complete (personally or with assistance) hazard, accident or incident reports as required by workplace procedures and relevant sections of WHS legislation/regulation |
Learning Outcomes
On successful completion of this course you will have developed and applied the skills and knowledge required to demonstrate competency in the above elements.
Details of Learning Activities
Integrated learning activities in this course consists of theory and practical components carried out in a workshop environment. Throughout the course, you will develop the skills and knowledge to create custom-made footwear products. You will learn to use and work with a range of materials, suppliers and components used in footwear manufacturing.
Teaching Schedule
Note: While your teacher will cover all the material in this schedule, the weekly order is subject to change depending on class needs and availability of speakers and resources.
Please refer to MyRMIT for teaching schedule for this course.
Learning Resources
Prescribed Texts
References
Other Resources
The University Library has extensive resources. The Library has produced a number of subject guides that includes quality online and print resources for your studies. The Library provides guides and subject specialist help via your Liaison Librarians
Overview of Assessment
Assessment is ongoing throughout the semester and will consist of both theory and practical based exercises, predominantly in class but some out of class research and information formatting is required as well. Feedback will be provided throughout the semester on all assessment tasks.
All assessment tasks must be completed before competency can be achieved. Tasks that have not be authenticated in class as the student’s own work will not be considered for assessment. Regular attendance is encouraged.
If you have a long term medical condition and/or disability it may be possible to negotiate to vary aspects of the learning or assessment methods. You can contact the program coordinator or the Disability Liaison Unit if you would like to find out more.
Your course assessment conforms to RMIT assessment principles, regulations, policies, procedures and instructions which are available for review online: http://www.rmit.edu.au/students/assessment
Assessment Tasks
This course is assessed in accordance with competency-based assessment. To demonstrate competency in this course you will need to complete the following pieces of assessment to a satisfactory standard. You will receive feedback from the teacher at the conclusion of each assessment task.
You should refer to the assessment brief which is available on MyRMIT for full assessment criteria.
Results that apply to courses that are delivered and assessed in accordance with competency-based assessment are:
- CA: Competency Achieved
- NYC: Not Yet Competent
- DNS: Did not Submit for Assessment
Assessment Matrix
The assessment matrix demonstrates alignment of assessment tasks with the relevant unit of competency. These matrices are available through Program Administration (or Course Coordinator).
Other Information
Please refer to the RMIT student page for extensive information about study support, assessment, extensions, appeals and a range of other matters: https://www.rmit.edu.au/students
A student charter summarises your responsibilities as an RMIT student as well as those of your teachers. https://www.rmit.edu.au/about/our-education/supporting-learning-and-teaching/student-charter/
Attendance:
Your learning experience will involve class-based teaching, discussion, demonstration and practical exercises
It is strongly advised that you attend all timetabled sessions. This will allow you to engage in the required learning activities, ensuring you the maximum opportunity to complete this course successfully.
Student Progress:
Monitoring academic progress is an important enabling and proactive strategy designed to assist you in achieving your learning potential.
http://www1.rmit.edu.au/students/acadprogress
Cover Sheet for Submissions:
You must complete and sign a submission cover sheet for every piece of submitted work, including online submissions. http://www.rmit.edu.au/staff/studentadmin/assessment/authorisation
Adjustments to Assessment (eg. applying for an extension of time):
If you are unable to complete any piece of assessment satisfactorily by the due date, you can choose to apply for an adjustment to your assessment. RMIT University offers a range of adjustments designed to support you in your studies, including an extension of time to complete the assessment.
http://www1.rmit.edu.au/students/assessment/adjustment
Special consideration Policy
If you wish to apply for special consideration, follow this link for the procedure. http://www1.rmit.edu.au/students/specialconsideration
Penalties for late Submission of Assignments (F&T)
Late submission or presentation of assessable work without an approved extension will be penalised as follows:
Complete work submitted 1 to 7 days late will incur a penalty of 5% per day on your final mark
Partial or incomplete work submitted 1 to 7 days late will incur a penalty of 5% per day on your final mark for the entire assessable work
Work submitted after day 7 will be awarded an NN grade and 0% mark
Weekends and holiday periods are included in the calculation of the late penalty
Where a due date includes a specific time for submission or presentation, submissions after that time on the due date incur a 5% penalty.
Academic Integrity and Plagiarism:
RMIT University has a strict policy on plagiarism and academic integrity. Please refer to the website for more information on this policy. http://www1.rmit.edu.au/students/academic-integrity
Credit Transfer and Recognition of Prior Learning:
Credit transfer is the recognition of previously completed formal learning (an officially accredited qualification).
Recognition of Prior Learning (RPL) is an assessment process that allows you to demonstrate competence using the skills you have gained through experience in the workplace, voluntary work, informal or formal training or other life experiences.
Recognition of Current Competency (RCC) RCC applies only if you have previously successfully demonstrated competence in a unit of competency, and now require to be reassessed to ensure that the competence is being maintained.
Please speak to your teacher if you wish to discuss applying for Credit Transfer, RPL, or RCC for the unit(s) of competency addressed in this course.
http://www1.rmit.edu.au/students/enrolment/credit
Course Overview: Access Course Overview