Course Title: Build thermally efficient and sustainable structures

Part B: Course Detail

Teaching Period: Term1 2016

Course Code: BUIL5994C

Course Title: Build thermally efficient and sustainable structures

School: 130T Vocational Engineering

Campus: City Campus

Program: C5256 - Diploma of Building and Construction (Building)

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4338

Course Contact Email: vocengineering@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Janine Strachan

Nominal Hours: 40

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

Nil

Course Description

This unit of competency specifies the outcomes required to apply sound principles of thermal efficiency as part of the implementation of sustainable building and construction processes. The range of legislative and council planning requirements are addressed in this unit, in addition to the need to respond to growing consumer demand for sustainable buildings and environmentally friendly developments.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

CPCCBC4020A Build thermally efficient and sustainable structures

Element:

1. Apply legislative and planning requirements for thermal efficiency to the building process.

Performance Criteria:

1.1. Current relevant state, territory and council requirements for building thermally efficient structures are identified.
1.2. Factors that contribute to the construction of a five-star rated dwelling identified within the Building Code of Australia (BCA) are identified and the impact of regional climate differences is assessed.
1.3. Client needs and expectations for the design and construction of thermally efficient structures are identified and negotiated.
1.4. Expert design and other advice is gathered as part of the planning and construction process.
1.5. Relevant Australian standards are consulted to identify the implications for the conduct of the building project.

Element:

2. Review design solutions for effectiveness and compliance.

Performance Criteria:

2.1. Impact of radiation, convection, conduction and evaporation on the thermal comfort of residents is identified.
2.2. Orientation of the building, location and size of glazing, and use of thermal mass as design features are evaluated for effectiveness and compliance with planning and other regulatory requirements.
2.3. Effective strategy for insulating the structure is evaluated, costed and communicated to the client.
2.4. Building designs are assessed for their compliance with the energy efficiency requirements of the BCA's five-star rating system.
2.5. Designers and clients are consulted to ensure final construction plans are effective, efficient and compliant.

Element:

3. Manage the building process to ensure an effective outcome.

Performance Criteria:

3.1. Effective communications are established between designers, architects and clients to ensure effective thermal performance is embedded from the design to construction phase.
3.2. Effective quality assurance processes are confirmed as in place to evaluate and implement the building of a five-star dwelling.
3.3. Cost effective strategies to achieve desired level of thermal performance are assessed and communicated to client.
3.4. Life cycle costs of various construction approaches are assessed and negotiated with the client.


Learning Outcomes


Refer to elements.
 


Details of Learning Activities

Students will be involved in the following learning activities to meet requirements for this competency:
• Face to Face classes
• Simulated Workplace Learning
• Online learning via blackboard
• Other forms of structured teaching and learning
Students will be observed and assessed through their planned activities throughout the duration of the course.


Teaching Schedule

Weeks 1 -5

Climate Change & Renewable Energy
Underpinning knowledge & Introduction to Thermal Efficiency
Climate Zones & planning
Orientation & Siting
Passive solar design

 Weeks 6-10

Windows & Shading
Building Regulations & Legislation
Insulation
Heat Transfer & managing heat transfer
Glazing systems

  Weeks 11-16

Sustainable Materials & Life Cycle Assessment
Clients & Communication
Quality Assurance


Learning Resources

Prescribed Texts


References


Other Resources

 Students will be able to access course information and learning materials through myRMIT and may be provided with additional materials in class. Lists of relevant reference books, resources in the library and accessible Internet sites will be provided where possible. During the course, you will be directed to websites to enhance your knowledge and understanding of difficult concepts.

Blackboard

Blackboard is an on-line resource with the lesson plans for each unit. Within Blackboard are the session lessons plans, assessments, resources and other materials required for completion of each unit of competency. Blackboard Collaborate is an on-line delivery system within Blackboard that may be utilised as a virtual classroom that may be a part of the overall lesson delivery plan.

 

NCC Volume 2

ICANZ Handbook

   

In class activities

Library

Internet

 


Overview of Assessment

Assessment will incorporate a variety of methods including written,oral, practical tasks and activities. You will be asked to personally demonstrate to your teacher/assessor the practical skills gained during this course to the relevant industry standards. Assessment activities will occur throughout this course and feedback will be provided at regular intervals.

Assessment Tasks

Students must pass each of the following assessment tasks to demonstrate competent.

 

Assessment

Weight %

Assessment 1

Passive Solar Design

35

Assessment 2

Material Use

35

Assessment 3

Online Test

30

These tasks assesses the following Course Learning Outcomes (CLOs):

Assessment Mapping Matrix

Element / Performance Criteria Covered

Assessment 1

Assessment 2

Assessment 3

1.1

X

 

X

1.2

X

X

X

1.3

X

X

X

1.4

X

 

X

1.5

 

X

X

2.1

X

 

X

2.2

X

 

 

2.3

 

X

 

2.4

 

X

 

2.5

 

X

 

3.1

 

 

X

3.2

 

X

X

3.3

 

X

 

3.4

 

X

X

 

 

To be deemed competent you must demonstrate an understanding of all aspects required of the competency. Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks.


Assessment Tasks

 Assessment                                                 Weight %
Assessment 1 Passive Solar Design       35
Assessment 2 Material Use                        35
Assessment 3 Online Test                          30


 


Assessment Matrix

Element / Performance Criteria CoveredAssessment 1Assessment 2Assessment 3
1.1X X
1.2XXX
1.3XXX
1.4X X
1.5 XX
2.1X X
2.2X  
2.3 X 
2.4 X 
2.5 X 
3.1  X
3.2 XX
3.3 X 
3.4 XX

Other Information

  Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
• Relevant
• Current
• Satisfies the learning/competency outcomes of the course

Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.

Study and Learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:
• Assignment writing, thesis writing and study skills advice
• Maths and science developmental support and advice
• English language development

Please refer to http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and Learning Support.

Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please refer to http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.

Late Submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for seven calendar days or less (from the original due date) and have valid reasons, you must complete an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than two working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than seven calendar days (from the original due date), you must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than two working days after the official due date.

Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.

Special Consideration:
Please refer to http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration.

Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the university.
Please refer to http://www.rmit.edu.au/academicintegrity to find more information about plagiarism.

Email Communication:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

Course Overview: Access Course Overview