Course Title: Analyse force systems (advanced)

Part B: Course Detail

Teaching Period: Term1 2015

Course Code: CIVE5675

Course Title: Analyse force systems (advanced)

School: 130T Vocational Engineering

Campus: City Campus

Program: C6093 - Advanced Diploma of Engineering Design

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vocengineering@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Dr. A R M Muniruzzaman
School of Vocational Engineering (SoVE)
Civil Engineering
Tel: (03) 9925 4415
Fax: (03) 9925 4189
E-mail: arm.muniruzzaman@rmit.edu.au

Anita Mehmi
School of Vocational Engineering (SoVE)
Civil Engineering
Tel: (03) 9925 2011
Fax: (03) 9925 4189
E-mail: anita.mehmi@rmit.edu.au

Nominal Hours: 60

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

EDX130B – Use technical mathematics (basic)
EDX140B – Use technical mathematics (advanced)
EDX100B – Analyse force systems (basic)

Course Description

This unit covers the competency to extend basic skills and knowledge in calculating forces, moments and stresses to AQF level 5. It brings the level of competency in force and stress analysis to that needed to commence design calculations in either the mechanical or structural field using Australian and/or ISO Design Standards.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

EDX190B Analyse force systems (advanced)

Element:

01. Solve problems using the laws of dry sliding friction.

Performance Criteria:

1.1 Problems are solved using the laws of dry sliding friction for objects on horizontal and inclined planes.

1.2 Problems are solved using the laws of dry

Element:

02. Determine support reactions for determinate structures.

Performance Criteria:

2.1 Free Body Diagrams are drawn of loaded structures showing the support reactions.

2.2 The support with a reaction in a known direction is recognised and the direction shown on the Free Body Diagram.

2.3 Support reactions (magnitude & direction) are determined, using the principles of equilibrium.

Element:

03. Determine the internal forces acting on members of a pin jointed truss.

Performance Criteria:

3.1 A variety of recognized methods are used to determine the internal forces acting on all members of simple two-dimensional pin jointed trusses.

3.2 Tension and compression members are differentiated.

Element:

04. Determine the pin reactions of a pin jointed frame.

Performance Criteria:

4.1 The Method of Members is used to determine the forces acting on the pins of a simple two-dimensional pin jointed frame or machine.

Element:

05. Determine pin and support reactions for a simple noncoplanar non-concurrent force system.

Performance Criteria:

5.1 Given a range of simple three-dimensional shaft or trapdoor systems, the magnitude of the components of the forces at supports, pins or hinges is determined.

Element:

06. Determine bolt sizes or number of bolts required for simple bolted connections.

Performance Criteria:

6.1 The appropriate cross sectional area from a standard bolt data table is used in calculations.

6.2 Calculations are completed to determine the size or number of
bolts required for simple bolted connections.

Element:

07. Determine the nominal weld size or length of weld required on simple welded connections.

Performance Criteria:

7.1 Calculations are completed to determine the size and length of welds for simple welded connections subjected to direct shear only.

Element:

08. Determine wall thickness in thin walled cylinders subjected to pressure.

Performance Criteria:

8.1 The equations for Hoop stress and longitudinal stress are used to calculate stresses in thin walled vessels subject to pressure.

8.2 The equations for hoop stress and longitudinal stress are used to determine the required minimum wall thickness for thin walled vessels.

8.3 A Factor of Safety is applied in calculations involving thin walled vessels subjected to pressure.

Element:

09. Calculate shaft size and angle of twist for simple circular shafts subject to torques.

Performance Criteria:

9.1 The torsional shear stress formula is used to calculate torsional shear stress and angle of twist in a circular shaft for a given torque load.

9.2 Torque distribution diagrams are sketched to determine maximum torque for shafts involving several power takeoff points.

9.3 The torsional shear formula is used to calculate the nominal diameter of a simple circular shaft for a given torque load.


9.4 A shaft size is calculated for a simple shaft to meet a
requirement for maximum stress or maximum angle of twist.

Element:

10. Use Johnson or Euler equations to determine buckling loads.

Performance Criteria:

10.1 The column is analysed to determine whether the Johnson or Euler equation can be used.

10.2 End fixing conditions are analysed to determine the effective length.

Element:

11. Determine the thermal stress in single members caused by restraint and changes in temperature.

Performance Criteria:

11.1 Calculations are carried out to determine thermal stress in simple members caused by full or partial restraint and changes in temperature.


Learning Outcomes


Refer to the Elements


Details of Learning Activities

Learning activities are listed in the Learning Guide (under Course Content) and also in the Teaching Schedule (Course Information) on the BlackBoard.


Teaching Schedule

 

Week Topic Delivered Elements /
Performance Criteria
1 - 2
 
Friction
 
1.1, 1.2
3 - 6
 
Frames and trusses
 
2.1, 2.2, 2.3, 3.1, 3.2, 4.1, 5.1
7 - 8
 
Connections 6.1, 6.2, 7.1
9
 
Revision
 
1.1, 1.2, 2.1, 2.2, 2.3, 3.1, 3.2, 4.1, 5.1, 6.1, 6.2, 7.1
10
 
Exam 1
 
1.1, 1.2, 2.1, 2.2, 2.3, 3.1, 3.2, 4.1, 5.1, 6.1, 6.2, 7.1
11
 
Pressure vessels
 
8.1, 8.2, 8.3
12
 
Torque in shafts
 
9.1, 9.2, 9.3, 9.4
13 - 14
 
columns
 
10.1, 10.2, 10.3
15
 
Thermal stresses
 
11.1
16
 
Revision
 
8.1, 8.2, 8.3, 9.1, 9.2, 9.3, 9.4, 10.1, 10.2, 10.3, 11.1
17 - 18
 
Exam 2
 
8.1, 8.2, 8.3, 9.1, 9.2, 9.3, 9.4, 10.1, 10.2, 10.3, 11.1


Learning Resources

Prescribed Texts

Engineering Mechanics, Val Ivanoff

0 07 470239 4


References

Structural Mechanics, Nageim/Durka/Morgan/Williams

0 582 43165 4


Other Resources

.


Overview of Assessment

Assessment are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.

Your assessment for this course will be marked using the following table:

NYC (<50%) Not Yet Competent

CAG (50-59%) Competent - Pass

CC (60-69%) Competent - Credit

CDI (70-79%) Competent - Distinction

CHD (80-100%) Competent - High Distinction


Assessment Tasks

This is a competency-based course and competency must be demonstrated for each element (shown above) to achieve competency for the course.
The elements and performance criteria are contained within the topics as listed in the teaching schedule on the BlackBoard.
Each topic will be assessed using the form of assessment and weighting shown below.
Please note that the topics listed in the assessment matrix below refer to the topics in the learning guide and teaching schedule and do not refer to the elements shown above.
Assignment task will require a student to demonstrate that all the tutorial problems have been genuinely attempted and need to be submitted as evidence of the work done in order to receive the allocated marks.


Assessment Matrix

Topics (as in the Learning Guide)ElementsAssessmentWeightingWhen
Friction, Frames & Trusses & Connections           1, 2, 3, 4, 5, 6Assignment 10 %

Week
2 -8

Friction, Frames & Trusses & Connections1, 2, 3, 4, 5, 6Exam 140 %Week 10
Pressure vessels, Torque, Columns & Thermal Stresses 7, 8, 9, 10, 11Assignment 10 %Week
11-16
Pressure vessels, Torque, Columns & Thermal Stresses7, 8, 9, 10, 11Exam 240 %Week 17

 

 

       EDX190B Elements & performance criteria
Assessments1.1 1.22.1 2.2 2.3 3.1 3.2 4.1 5.16.1 6.2 7.1 8.1 8.2 8.3 9.1 9.2 9.3 9.410.110.210.3  11.1
AssignmentXXXXXXXXX X X X           
Exam 1XX X X X X X X XXXX           
Assignment            XXXXXXXXXXX
Exam 2            XXXXXXXXXXX

Other Information

Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities. The estimated time is minimum 20 hours outside the class time.

Credit Transfer and/or Recognition of Prior Learning (RPL):

You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:

• Relevant
• Current
• Satisfies the learning/competency outcomes of the course

Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.

Study and Learning Support:

Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:

• Assignment writing, thesis writing and study skills advice
• Maths and science developmental support and advice
• English language development

Please refer to http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and Learning Support.

Disability Liaison Unit:

If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.

Please refer to http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.

Late Submission:

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for seven calendar days or less (from the original due date) and have valid reasons, you must complete an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.

The application must be lodged no later than one working day before the official due date. You will be notified within no more than two working days of the date of lodgement as to whether the extension has been granted.

If you seek an Extension of Submittable Work for more than seven calendar days (from the original due date), you must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than two working days after the official due date.

Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.

Special Consideration:

Please refer to http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration.

Plagiarism:

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the university.

Please refer to http://www.rmit.edu.au/academicintegrity to find more information about plagiarism.

Email Communication:

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
 

Course Overview: Access Course Overview