Course Title: Determine design actions and analyse structures

Part B: Course Detail

Teaching Period: Term1 2012

Course Code: CIVE5679

Course Title: Determine design actions and analyse structures

School: 130T Vocational Engineering

Campus: City Campus

Program: C6093 - Advanced Diploma of Engineering Design

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: engineering-tafe@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Course Co-ordinator/Teacher: Anirban Khastagir

Email: anirban.khastagir@rmit.edu.au

Phone: 99254087

Room: 57.05.34

Nominal Hours: 60

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

EDX130B – Use technical mathematics (basic)
EDX140B – Use technical mathematics (advanced)
EDX100B – Analyse force systems (basic)

Course Description

This unit covers the competency to use the Australian Standard AS 1170 to determine and to calculate different kinds of loadings on structural elements and to perform analysis of beam and column structures involving calculation of such features as support reactions, shear and bending moments.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

EDC030B Determine design actions and analyse structures

Element:

10. Write report

Performance Criteria:

10.1 All data, assumptions and calculations including diagrams are written up in a short technical report.

Element:

1. Use AS/NZS 1170 Parts 0 & 1 to calculate permanent and imposed actions on simple structural elements

Performance Criteria:

1.1 Appropriate data is extracted from AS 1170 Part 1
1.2 The appropriate value of dead load and live load is calculated for given conditions.
1.3 The combined effect of dead load and live load is calculated using the relevant load combinations from AS 1170 Part 0.

Element:

2. Use-AS/NZS 1170 Part 2 to calculate wind action on simple structural elements and closed structures.

Performance Criteria:

2.1 AS 1170 Part 2 is used to extract relevant data related to wind loading.
2.2 The wind load on a structural element is calculated using the simplified procedure from AS 1170 Part 2

Element:

3. Calculate loading on structural elements due to liquid pressure

Performance Criteria:

3.1 Given relevant data, the resultant force due to fluid pressure on a structural element can be calculated.
3.2 The line of action of the resultant force and moment created is calculated.

Element:

4. Use AS/NZS 1170 Part 0 to calculate action effects in limit state format

Performance Criteria:

4. Design of beams and columns for limit state design

Element:

5. Carry out calculations to determine beam deflection under various action effects and check conformance to serviceability criteria.

Performance Criteria:

5.1 The bending strength of a simply supported beam can be calculated – including simple bending stress, local plate buckling and lateral buckling.
5.2 The shear strength of a simply supported beam can be calculated.
5.3 The deflection in a simply supported beam can be calculated

Element:

6. Carry out a detailed analysis of a structural member subject to compression actions.

Performance Criteria:

6.1 The buckling strength of a simple compression member can be calculated given the end and intermediate restraints.
6.2 The effective length and restraint conditions can be determined from a structural drawing for a compression member.

Element:

7. Carry out analysis of continuous beams

Performance Criteria:

7.1 The member forces in a continuous beam can be calculated.
7.2 The redundant forces in a simple continuous beam can be calculated using work-energy principles.

Element:

8. Carry out analysis of simple rectangular frames

Performance Criteria:

8.1 Given length, E,I and end conditions for a simple beam column connection in a rectangular frame, the distribution of moments can be calculated.

Element:

9. Calculate the distribution of forces at joints in accordance with the elements' stiffness

Performance Criteria:

9.1 The member force in a simple rectangular frame restrained against sway can be calculated.
9.2 The moment distribution method can be used to analyse simple sway restrained and non-restrained structures.


Learning Outcomes


.


Details of Learning Activities

  • Calculation of dead loads, live loads, wind loads and liquid pressure on structural elements
  •  Detailed analysis of a simply supported beam including calculations for simple bending, shear, deflection, local buckling and lateral buckling
  •   Detailed analysis of a structural member subjected to compression loads
  • Analysis of continuous beams
  • Analysis of simple rectangular frames
  • Distribution of forces at joints in accordance with the Elements stiffness
  • Using the Internet research AS/NZS 1170 Part 0, 1 & 2 and identify the clauses required for the calculation of dead loads, live loads and wind loads


Teaching Schedule

WeekTopic
1-2Dead load and live load
3-5Wind Load
6Liquid Pressure
7Beam design
8Cplomn Design
9Project/Revesion
10Mid semester Exam
11Moment Distribution Method (Beam)
12Slope Deflection Method (Beam)
13Moment Distribution Method (Frame)
14Slope Deflection Method (Frame)
15Sway effect- Frame
16Revesion class
17Final Exam


Learning Resources

Prescribed Texts

AS 1170.0 Structural design actions part 0: General principles
AS 1170.1 Structural design actions part 1: Permanent, imposed and other actions
AS1170.2 Structural design actions part 2: Wind actions
OR
HB2.2 Australian Standards for civil engineering students - Structural engineering
AND
“Onesteel – Hot rolled and structural products” catalogue
AND
RMIT CIVE5679 Learning Guide

Holmes and King “ Wind Action”


References


Other Resources


Overview of Assessment

Assessment are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.

Your assessment for this course will be marked using the following table:

NYC (<50%) Not Yet Competent

CAG (50-59%) Competent - Pass

CC (60-69%) Competent - Credit

CDI (70-79%) Competent - Distinction

CHD (80-100%) Competent - High Distinction


Assessment Tasks

 

Assessment tasks for this course are as follows:

Topic 1,2,3,4 - Mid-semester exam
Topic 3       - Project
Topic 2 Assignment
Topic 5,6,7,8,9 - End of semester exam


Assessment Matrix

Other Information

Study and Learning Support:

The Study and Learning Centre (SLC) provides free learning and academic development advice to all RMIT students.
Services offered by SLC to support numeracy and literacy skills are:

* Assignment writing, thesis writing and study skills advice
* Maths and science developmental support and advice
* English language development

Please refer http://www.rmit.edu.au/studyandlearningcentre to find more information

Disability Liaison Unit:

If you have a disability or long-term medical condition you should contact the DLU to seek advice and support.

Please Refer http://www.rmit.edu.au/disability to find more information about their services

Late submission:

If you require an extension for 7 calendar days or less (from the original due date) you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. The student will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.

If you require an extension of more than 7 calendar days (from the original due date) you must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.

Assignments submitted late without approval of an extension will not be accepted nor marked.

Special consideration:

Please Refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information

Plagiarism:

Plagiarism is a form of cheating and it is a very serious academic offence that may lead to expulsion from the University.

Please Refer: www.rmit.edu.au/academicintegrity to find more information.

Other Information:

All email communications will be sent to your RMIT email address and it is recommended that you check it regularly.

Course Overview: Access Course Overview