Course Title: Analyse and design foundations
Part B: Course Detail
Teaching Period: Term2 2014
Course Code: CIVE5684
Course Title: Analyse and design foundations
School: 130T Vocational Engineering
Campus: City Campus
Program: C6093 - Advanced Diploma of Engineering Design
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: engineering-tafe@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Dr. B. Richards
Ph +61 3 9925 4172
e-mail betty.richards@rmit.edu.au
Nominal Hours: 60
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
EDX130B-Use technical mathematics (basic)
EDX140B-Use technical mathematics (advanced)
EDX100B-Analyse force systems (basic)
EDC010B-Carry out geotechnical site investigation
EAC120B-Test and evaluate soils
Course Description
This unit of competency covers the skills and knowledge required to analyse and design residential slabs and footings, shallow footings in general and retaining structures, as well as select piles, underpinning methods and their applications, based on the fundamental principles and concepts applied to deep foundations, underpinning, trenching and sheet piling.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
EAC030B Analyse and design foundations |
Element: |
1. Select an appropriate footing type. |
Performance Criteria: |
1.1 Understanding of the broad classification of foundations is used |
Element: |
2. Carry out simple footing design to AS 2870 "Residential Slabs and Footings". |
Performance Criteria: |
2.1 The scope of AS 2870 is understood and used to inform footing |
Element: |
3. Carry out simple shallow footing designs based on the principles of soil mechanics. |
Performance Criteria: |
3.1 Designs are prepared for simple shallow footings based on |
Element: |
4. Calculate stresses in a soil mass. |
Performance Criteria: |
4.1 Calculations are carried out to determine the stresses in a soil |
Element: |
5. Design simple cantilever and gravity retaining walls. |
Performance Criteria: |
5.1 Understanding of common types of retaining structures and their |
Element: |
6. Select pile type/s and prepare a design. |
Performance Criteria: |
6.1 Appropriate pile types are selected, given a building plan, |
Element: |
7. Determine appropriate underpinning for various situations. |
Performance Criteria: |
7.1 Appropriate underpinning for various situations is identified. |
Element: |
8. Design and analyse unsupported excavation trenching. |
Performance Criteria: |
8.1 Unsupported excavation trenching is designed and analysed. |
Element: |
9. Design a cantilever sheetpiling wall. |
Performance Criteria: |
9.1 A cantilever sheetpile wall retaining cohesionless soil is |
Learning Outcomes
Details of Learning Activities
You will be involved in the following learning activities to meet requirements for this course and program
• Lectures
• Tutorials
• Projects
• Site visits
• Invited lecture
Further there will be a mixture of instructor–led face to face lessons and directed problem-solving exercises.
Student learning activities will include individual and team problem solving activities, which address the designated areas of underpinning knowledge for each element. A record of such activities is to be kept in the Team Journal. Activities will also include group and individual based research, oral presentation of research outcome. A minimum of 20% of the scheduled teaching hours will be allocated to self guided learning activities.
Teaching Schedule
Week | Topic description | Element/Performance Criteria |
1-3 | 1. Select an appropriate footing type | 1.1,1.2,1.3,1.4,1.5 |
4-6 | 2. Carry out simple footing design to AS2870 "Residential Slabs and Footings" 3. Carry out simple shallow footing designs based on the principles of soil mechanics |
2.1,2.2,2.3,2.4 3.1,3.2 |
7-10 | 4. Calculate stresses in a soil mass | 4.1,4.2,4.3 |
11-14 |
5. Design simple cantilever and gravity retaining walls 6. Select pile types and prepare a design |
5.1,5.2,5.3,5.4,5.5,5.6,5.7,6.1,6.2,6.3,6.4,6.5 |
15-16 |
7.Determine appropriate underpinning for various situations 8. Design and analyse unsupported excavation trenching 9. Design a cantilever sheetpiling wall |
7.1,7.2,8.1,8.2,9.1,9.2,9.3 |
17/18 | Exam | 5.1,5.2,5.3,5.4,5.5,5.6,5.7,6.1,6.2,6.3,6.4,6.5,8.1,8.2,8.3,9.1,9.2,9.3 |
Learning Resources
Prescribed Texts
Will be advised during lessons. |
References
Other Resources
Notes posted on the blackboard. Handouts are distributed during class on a need basis. Handouts distributed during class are not posted on the blackboard.
Overview of Assessment
Assessment are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.
Your assessment for this course will be marked using the following table:
NYC (<50%) Not Yet Competent
CAG (50-59%) Competent - Pass
CC (60-69%) Competent - Credit
CDI (70-79%) Competent - Distinction
CHD (80-100%) Competent - High Distinction
Assessment Tasks
Assessment of this unit will be based on:
Assignment 1-team assignment, 15%
Exam, 45%
Assignment 2, 5%
Test, 30%
Team journal, 5%
Assessments may incorporate a variety of methods which include written/oral activities, and demonstration of skills through specific class activities. Cheat sheets are not allowed during closed book assessments. Solely authorized material is permitted during open book assessments (e.g., uploaded material on the blackboard, class handouts). Student written material, solution to problems, or books, are not permitted during open book assessments. Solely the use of scientific calculators is allowed. The team journal must contain record of all class activities, handouts, uploaded notes, worked solutions, etc.
Assessment Matrix
CIVE5684 Element/Performance Criteria |
|||||||||||||||||||||||||||||||||
Assessment | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 2.1 | 2.2 | 2.3 | 2.4 | 3.1 | 3.2 | 4.1 | 4.2 | 4.3 | 5.1 | 5.2 | 5.3 | 5.4 | 5.5 | 5.6 | 5.7 | 6.1 | 6.2 | 6.3 | 6.4 | 6.5 | 7.1 | 7.2 | 8.1 | 8.2 | 9.1 | 9.2 | 9.3 |
Assignment 1 | x | x | x | x | x | x | x | x | x | ||||||||||||||||||||||||
Exam | x | x | x | x | x | ||||||||||||||||||||||||||||
Assignment 2 | x | x | |||||||||||||||||||||||||||||||
Test | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | ||||||||||||||||
Team journal | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
Other Information
• Student directed hours involve completing activities such as reading online resources, project work, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is 20 hours outside the class time.
Study and Learning Support:
The Study and Learning Centre (SLC) provides free learning and academic development advice to all RMIT students.
Services offered by SLC to support numeracy and literacy skills are:
* Assignment writing, thesis writing and study skills advice
* Maths and science developmental support and advice
* English language development
Please refer http://www.rmit.edu.au/studyandlearningcentre to find more information
Disability Liaison Unit:
If you have a disability or long-term medical condition you should contact the DLU to seek advice and support.
Please refer to http://www.rmit.edu.au/disability to find more information about their services
Late submission:
If you require an extension for 7 calendar days or less (from the original due date) you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.
If you require an extension of more than 7 calendar days (from the original due date) you must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Assignments submitted late without approval of an extension will not be accepted nor marked.
Special consideration:
Please refer to http://www.rmit.edu.au/students/specialconsideration
Plagiarism:
Plagiarism is a form of cheating and it is a very serious academic offence that may lead to expulsion from the University.
Please refer to www.rmit.edu.au/academicintegrity to find more information.
Other Information:
All email communications will be sent to your RMIT email address and it is recommended that you check it regularly.
Course Overview: Access Course Overview