Course Title: Select and arrange equipment for general electrical installations

Part B: Course Detail

Teaching Period: Term1 2013

Course Code: EEET6801C

Course Title: Select and arrange equipment for general electrical installations

School: 130T Vocational Engineering

Campus: City Campus

Program: C6112 - Advanced Diploma of Engineering Technology - Electrical

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: engineering-tafe@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Marko Dumovic, GPO Box 2476V, Melbourne 3001
PHONE: 99254712    FAX: (03) 99254377
Email: marko.dumovic@rmit.edu.au
 

Nominal Hours: 120

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

UEENEEG002B Solve problems in single and three phase low voltage circuits

Course Description

This unit covers selection of equipment for electrical installations operating at voltages up to 1,000V a.c. or 1,500 V d.c. to meet performance standards. This encompass schemes for protection of persons and property, correct function, compatibility with the supply, arrangement of circuits and selection of switchgear, controlgear, protection devices and wiring based on calculated and deemed-to-comply solutions.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

UEENEEG007B Select and arrange equipment for general electrical installations

Element:

1. Prepare to select equipment.

Performance Criteria:

1 1.1 The extent and nature of the electrical installation is determined from job specifications.
1.2 Safety and other regulatory requirements to which the electrical installation shall comply area are identified, obtained and understood.

.

Element:

2. Arrange installation into circuits.

Performance Criteria:

2 2.1 Circuits are arranged to ensure safe and functional operation of the installation.
2.2 Circuits are arranged to comply with technical standards and job specifications and requirements.
2.3 Earthing is arranged to comply with the MEN system requirements.
 

Element:

3. Select cables, protection and switchgear.

Performance Criteria:

3 3.1 Wiring is selected for suitability for the environments in which they are installed.
3.2 Cable conductor sizes are selected to meet currentcarrying capacity requirements and voltage-drop and fault-loop impedance limitations.
3.3 Protection methods and devices are selected to meet co-ordination requirements for overload and shortcircuit protection.
3.4 Switchgear and control gear is selected to meet current, voltage and IP ratings and functional requirements.
3.5 Earthing system components are selected to meet requirements of the MEN system.
3.6 Evidence is obtained that electrical equipment selected complies with safety requirements.
 

Element:

4 Document electrical installation.

Performance Criteria:

4.1 Reasons for selections made, including calculations, are documented in accordance with established procedures.
4.2 Electrical installation arrangement and specifications for all selected items are documented in accordance with established procedures and forwarded to appropriate person(s).
 


Learning Outcomes



Details of Learning Activities

Classroom tutorial activities to consolidate the theory of electrical protections, equipment selection principles, installation arrangements for various electrical devices, cable selection, basic lighting principles, fault loop impedance, circuit protection .

Practical activities to develop skill in selection of electrical wiring systems, protective devices, various cables, switchboard, control panels and lightings.

Work simulation assignments on calculations relating to the general installation maximum demand calculations, volt drop considerations and fault conditions. Specifications will be provided with work simulation (team or individual basis) or may be negotiated to suit a workplace based application.

Project: Students are required to spend approximately 40 nominal hours for independent study on technical standards, regulations and codes for general electrical installations and minor electrical installation project 

This unit covers follwing Essential Knowledge & Associated Skills elements:

2.1.1 Cable protection and support
2.1.2 Cable types and applications
2.1.3 Cables in buildings, structures and premises
2.2.1 Enterprise communication methods
2.2.2 Enterprise work activities records
2.3.1 Electrical control devices
2.5.1.2 Drawings and diagrams
2.5.2.1 Technical standards, regulations and codes for electrical installations
2.5.2.2 Technical standards, regulations and codes for special electrical installations
2.5.10 Technical manuals and catalogues
2.5.11 Environmental and heritage awareness
2.6.1 Protection devices and applications
2.6.2.1 Switchboards/distribution boards
2.7.1.2 Electrical installations, wiring and accessories
2.7.1.3 Electrical wiring systems
2.7.2 Electrical installations, equipment requirements
2.7.3 Electrical installations, safety principles and requirements
2.7.4.1 Electrical installations, protection methods and devices
2.7.4.2 Electrical installations, circuit arrangements and equipment selection
2.11.3.1 Fixing and support devices and techniques
2.18.1 Occupational Health and Safety principles 
 
 


Teaching Schedule

Week            Topic Delivered                                                                                                                                       Assessment Task                                                                                                                               Competency element

Semester 1

1 Introduction; Power systems;  Video: Harnessing Nature’s Power                                                                                                                                                                                                          UEENEEG002B 1,1  1,2  1,3   1.4
2 Power generation, distribution, three phase power generation, star and delta connection, phase and line voltage; conditions for paralleling generators;  Videos: Three phase power generation and distribution; Power Demand
3 Electrical installation design requirements;  Industrial power distribution and utilization system.  Video: Electricity Distribution                                                                                                UEENEEG002B 1,1 1,2 1,3 1.4
4 Multiple Earthed Neutral System; Technical standards, regulations and codes for general electrical installations                                                                                                                      UEENEEG002B 1,1 1,2 1,3 2.1, 2.2,   2.4
5 Cables, insulations, temperature rating and wiring accessories; Video : Power Turbines
6 Transformer percentage impedance.  Fault level calculations  Video: World toughest Fixes: Fixing live power lines                                                                                                                       UEENEEG002B 1,1 1,2 2,3 1.4
7 Electrical installations, equipment requirements
8 Electrical installations, safety principles and requirements
9 Electrical installations, protection methods and devices  Video: Residential Wiring: 1 Installation Planing
10 Switchboards / distribution boards
11 Electrical installations, circuit arrangements
12 Lighting                                                                                                                                                                             Assignment 1    5%                                                                                          UEENEEG002B 2,1 1,2 4,2 4.1 2.6 3.3

13 Current caring capacity
14 Cable selection, derating factors                                                                                                                                                                                                           UEENEEG002B 1,1 1,2 1,3 1.4

15 Selection of equipment for general electrical installations
16 Maximum Demand : Domestic Installations                                                                                                                                                                                   
17 Maximum Demand : Domestic Installations                                                                                                             Test 1                     30%                                    UEENEEG002B 3,1 3,2 3,3 2.1, 

18 Catchup assessment, assignment submission
 

19 Maximum Demand : Industrial Installations
20 Maximum Demand : Industrial Installations                                                                                                             Assignment 2          5%                             UEENEEG002B 2,1 1,2 4,2   4.1  2.6   3.3

21 Voltage Drops
22 Voltage Drops                                                                                                                                                                  Project                    25 %
23 Voltage Drops
24 Circuit protection                                                                                                                                                            Assignment 3           5 %                            UEENEEG002B 2,1 1,2 4,2 4.1 2.5 3.3

25 Circuit protection
26 Arrangement equipment for general electrical installations
27 Fault loop impedance
28 RCD
29 Assessment                                                                                                                                                                    Test 2                          30%                              UEENEEG002B 2,1 1,2   3.6   4,3    4.2,  2.2 3.3

30-35 Electrical Installations Project                                                                                                                               

36 Catchup assessment, assignment submission
 


Learning Resources

Prescribed Texts

Marko Dumovic "Electrical Installations"  RMIT 2010


References

- Keith Pethbridge & Ian Neeson "Australian Electrical Wiring Practice - Volumes 1&2" McGraw Hill, ISBN 0 074 71053 2
- Australian Standard AS3000 - Wiring Rules
- Australian Standard AS3008 - Electrical Installations, Selection of Cables
- Theodore Wildi “Electrical Machines, Drives and Power Systems”, Prentice Hall ISBN: 0-13-082460-7


Other Resources

- RMIT student local network drive: I:\C6112\EEET6801C Electrical Installations

-RMIT online learning resources are located on RMIT Online Learning Hub.
Follow the link to log in http://www.rmit.edu.au The Learning Hub ( Blackboard) is the central point of access to the online courses in which students are registered


Overview of Assessment

This course will be assessed through a range of practical exercises, assignments and progressive tests.


Assessment Tasks

Progressive and Validation Tests 60%
Written assessment on selection of equipment for general electrical installations involving following topics :
-Arranging electrical installations to comply with safety and other regulatory and functional requirements.
- Selecting appropriate type and size of cables.
- Selecting protection methods and devices that meet co-ordination requirements for overload and short circuit protection.
-Selecting switchgear and control gear that meet current, voltage and IP ratings and functional requirements.

Project 25% 
Design of  electrical installation for workshop involving cable selection, maximum demand, fault level calculations and application of Australian standards in documenting installation arrangement, specification for items selected and reasons for the selections made. Project  requirements involve applications of standards, codes and requirements applicable to selecting and arranging electrical equipment, and shall be as close as practicable to real work situations and include real work decisions by the learner. 

Assignments 15% 
Satisfactory completion of prescribed class exercises based on applications of Australian standards. Assessment activities will be as close as practicable to real work situations and will require “real work” type decision-making by the student


Assessment Matrix

 

                                                                                                                                                                 Assessment Types
 

Competency National CodeCompetency TitleExercisesAssignmentProject/
Presentation
TestsIndustrial
Practice
 
UEENEEE007BSelect and arrange equipment for general electrical installations                                                                                      X  XX 


 

 
 

Other Information

In this course, minimum student directed hours are 28 in addition to 112 scheduled teaching hours.
* Student directed hours involve completing activities such as reading online resources, assignments, report for practical work, and individual student-teacher course-related consultation. 
 

Study and learning Support:

Study and Learning Centre (SLC) provides free learning and academic development advice to all RMIT students.
Services offered by SLC to support numeracy and literacy skills of the students are:

assignment writing, thesis writing and study skills advice
maths and science developmental support and advice
English language development

Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support

Disability Liaison Unit:

Students with disability or long-term medical condition should contact Disability Liaison Unit to seek advice and support to
complete their studies.

Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit

Late submission:

Students requiring extensions for 7 calendar days or less (from the original due date) must complete and lodge an Application
for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. The student will be notified within
no more than 2 working days of the date of lodgment as to whether the extension has been granted.

Students seeking an extension of more than 7 calendar days (from the original due date) must lodge an Application for Special
Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days
after the official due date.

Assignments submitted late without approval of an extension will not be accepted or marked.


Special consideration:

Please Refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information about special consideration

Plagiarism:

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.

Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.

Email Communication:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

Course Overview: Access Course Overview