Course Title: Solve problems in d.c. circuits

Part B: Course Detail

Teaching Period: Term1 2013

Course Code: EEET7020C

Course Title: Solve problems in d.c. circuits

School: 130T Vocational Engineering

Campus: City Campus

Program: C6120 - Advanced Diploma of Engineering Technology - Electrical

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vehs@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Rand Gorgis
Ph: 99254378
Fax: (03) 99254377
Email: rand.gorgis@rmit.edu.au

Andrew Kim
Ph: 99254295
Fax: (03) 99254377
Email: andrew.kim@rmit.edu.au
 

Kemps Cheng
Ph: 99254691
Fax: (03) 99254377
Email: kemps.cheng@rmit.edu.au

Nominal Hours: 80

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

UEENEEE101A

Course Description

This unit covers determining correct operation of single source d.c. series, parallel and series-parallel circuits and providing solutions as they apply to various electrotechnology work functions. It encompasses working safely, problem solving procedures, including the use of voltage, current and resistance measuring devices, providing solutions derived from measurements and calculations to predictable problems in single and multiple path circuits.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

UEENEEE104A Solve problems in d.c. circuits

Element:

1. Prepare to work on d.c. electrical circuits.

Performance Criteria:

1.1 OHS procedures for a given work area are identified, obtained and understood.
1.2 OHS risk control work preparation measures and procedures are followed.
1.3 The nature of the circuit problem is obtained from documentation or from work supervisor to establish the scope of work to be undertaken.
1.4 Advice is sought from the work supervisor to ensure the work is coordinated effectively with others.
1.5 Sources of materials that may be required for the work are identified and accessed in accordance with established procedures.
1.6 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety.
 

Element:

2. Solve d.c. circuit problems.

Performance Criteria:

2.1 OHS risk control work measures and procedures are followed.
2.2 The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures.
2.3 Circuits are checked as being isolated where necessary in strict accordance OHS requirements and procedures.
2.4. Established methodological techniques are used to solve d.c. circuit problems from measure and calculated values as they apply to electrical circuit.
2.5 Unexpected situations are dealt with safely and with the approval of an authorised person.
2.6 Problems are solved without damage to apparatus, circuits, the surrounding environment or services and using sustainable energy practices.
 

Element:

3. Complete work and document problem solving activities.

Performance Criteria:

3.1 OHS work completion risk control measures and procedures are followed.
3.2 Work site is cleaned and made safe in accordance with established procedures.
3.3 Justification for solutions used to solve circuit problems is documented.
3.4 Work completion is documented and appropriate person(s) notified in accordance with established procedures.
 


Learning Outcomes


Refer to Elements


Details of Learning Activities

Classroom tutorial activities to consolidate the theory of concepts
Practical activities applied, with problem solving and related questions to develop skills in safe testing.
Projects may be undertaken as part of a team or individual basis.
Participate in individual and team problem solving scenarios/role plays/ case studies and participate in supervised workshop practice in simulated workplace environment dealing with a range of practical exercises related to:
1. Series Circuits
2. Parallel Circuits
3. Series /Parallel circuits
4. Effects of meters in a circuits
5. Resistance measurement
6. Capacitor and Capacitance
7. Capacitors in series and parallel

The skills and knowledge described in this unit may require a license to practice in the workplace where plant and equipment are directly connected to installation wiring that operates at voltage above 50 V a.c. or 120 V d.c.
 


Teaching Schedule

Week Number Topic Delivered Assessment Task
 
1 Basic electrical concepts
Electro technology industry.
Production of electricity.
Transmission and distribution systems of electricity. Utilisation of electricity by the various loads
Basic calculations involving quantity of electricity, velocity and speed with relationship to the generation and transportation of electricity
 
 Introduction to Lab Equipment.

OHS obligations and safe behaviour in lab;

Introduction to MultiSim software
 

2 Basic electrical circuit
Symbols used to represent an electrical energy source, a load, a switch and a circuit protection device in basic d.c. single path circuit
Purpose of each component in the circuit.
Effects of an open-circuit, a closed-circuit and a short-circuit
 
 Tutorial # 1
3 Ohm’s Law
Relationship between voltage, current and resistance from measured values in a simple circuit.
Determining voltage, current and resistance in a circuit given any two of these quantities.
Graphical relationships of voltage, current and resistance
 
 Tutorial # 2
4 Electrical power
Relationship between force, power, work and energy
Power dissipated in circuit from voltage, current and resistance values.
Power ratings of devices
Measurement electrical power in a d.c. circuit.
Effects of power rating of various resistors
 
 Lab #1 (2.5%)
Introduction to OHS Electrical safety

Meters
 

5 Effects of electrical current
Effects of current.
The fundamental principles (listed in AS/NZS 3000) for protection against the effects of current.
Basic principles by which electric current can result in the production of heat; light; magnetic fields; and a chemical reaction.
Typical uses of the effects of current.
 
 Tutorial # 3
6 EMF sources energy sources and conversion electrical energy
Basic principles of producing a emf from the interaction of a moving conductor in a magnetic field, from the heating of one junction of a thermocouple, by the application of sun light falling on the surface of photovoltaic cells, and when a mechanical force is applied to a crystal (piezo electric effect).
Principles of producing a electrical current from primary, secondary and fuel cells.
Input, output, efficiency or losses of electrical systems and machines
Effect of losses in electrical wiring and machines.
Principle of conservation of energy
 
 Lab #2 (2.5%)
7 Resistors
Features, identification, types and applications of fixed and variable resistors.
Power ratings of a resistor.
Power loss (heat) occurring in a conductor.
Use the colour code table to identify resistors and confirm the value by measurement.
Specifying a resistor for a particular application
 
 Tutorial 4
Solve problems at the end of chapter 2 in the text book

Project
10%
Available on Blackboard
 

8 Series circuits
Circuit diagram of a single-source d.c. ‘series’ circuit.
Applications and characteristics of ‘series’ circuits used in the Electro technology industry.
KVL and simple voltage divider networks.
Effect of an open-circuit on a series connected circuit.
 
 Lab # 3 (2.5%)
9 Parallel circuits
Schematic diagram of a single-source d.c. ‘parallel’ circuit.
Applications and characteristics of ‘parallel’ circuits used in the Electro technology industry.
KCL and simple current divider rule and power dissipation.
Output current and voltage levels of connecting cells in parallel.
 
 Written Test
(20%)
 
10  Series/parallel circuits
Schematic diagram of a single-source d.c. ‘series/parallel’ circuit.
Applications and characteristics of ‘series/parallel’ circuits used in the Electrotechnology industry.
Relationship between voltages, currents and resistances in a bridge network.
Calculation of the total resistance, the voltage, current and power dissipated from measured values of any two of these quantities of a ‘series/parallel’ circuit.
 
 Lab # 4 (2.5%)
 11  Factors affecting resistance
Factors affect the resistance of a conductor (type of material, length, cross-sectional area and temperature)
Effects of resistance on the current-carrying capacity and voltage drop in cables.
Calculation of the resistance.
 
 Lab # 5 (2.5%)
 12  Effects of meters in a circuit
Operating characteristics of analogue and digital meters, range, loading effect and accuracy for a given application.
Connection of instruments into a circuit to measure voltage, current and resistance, reading analogue scales and digital readouts in measuring voltage, current and
resistance
 
 Lab # 6 (2.5%)
 13  Resistance measurement
Identification of instruments used in the field to measure resistance.
The purpose of an Insulation Resistance (IR) Tester calibration, storing and checking.
Zero ohms adjustment, battery check function, scale and connecting leads).
Reasons why the supply must be isolated prior to using the IR tester.
The continuity test, insulation resistance test used in an electrical installation and AS/NZS3000 Wiring Rules requirements.
The voltage ranges of an IR tester and where each range may be used. e.g. 250 V d.c, 500 V d.c and 1000 V d.c
 
 Lab # 7 (2.5%)
 14  Capacitance
Definition of capacitance, how a capacitor is charged.
Units by which capacitance is measured.
Capacitance voltage and charge.
Behaviour of an RC series d.c. circuit
 
 Lab # 8 (2.5%)
 15  Capacitors
Hazards and safety control. Factors which determine the capacitance of a capacitor in all circuits to some extent.
Capacitors types
Identifying capacitors values
Common faults in capacitors.
testing of capacitors to determine serviceability
 
 
 16  Capacitors in Series and Parallel
Capacitors connected in parallel calculating their equivalent capacitance.
Effects on the total capacitance of capacitors connected in series
 
 Project
10%
Due
 
 17  Final written exam in Centralised Exam Period either in Week 17 or Week 18  
     


Learning Resources

Prescribed Texts

Introductory Circuit Analysis
By: Robert L. Boylestad

0-13-173044-4


References

RMIT online learning resources are located on RMIT Online Learning Hub. Follow the link to log in http://www.rmit.edu.au
The Learning Hub ( Blackboard) is the central point of access to the online courses in which students are registered.
 


Other Resources

Tutorial and Laboratory Instruction sheets will be available online (using Online Learning Hub) and student’s local drive


Overview of Assessment

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:

Assessment 1: Practical/Laboratories
Weighting towards final grade (%): 20

Assessment 2: Assignment
Weighting towards final grade (%): 10

Assessment 3: Practical Test
Weighting towards final grade (%): 20

Assessment 4: Final Written Test
Weighting towards final grade (%): 50

These tasks assesses the following Course Learning Outcomes (CLOs):

Assessment Mapping Matrix 

Element/Performance Criteria Covered

Assignment

Lab

Practical Test

Final Written Test

1.1

x

x

x

x

1.2

x

x

x

x

1.3

x

x

x

x

1.4

x

x

x

x

1.5

x

x

x

x

1.6

x

x

x

x

2.1

x

 x

x

x

2.2

x

 x

x

x

2.3

x

 x

x

x

2.4

x

 x

x

x

2.5

 x

x

 x

 x

2.6

 x

x

 x

3.1

 x

x

 x

 x

3.2

 x

x

 x

 x

3.3

 x

x

 x

 x

3.4

 x

x

 x


Assessment Tasks

1. Laboratory exercises (20%)
Each student will complete 8 practical exercises designed to reinforce the theory topics taught during the semester.
Most practical exercises consist of two major parts:
Part A is a prior task includes only calculations (usually pre requisite for part B) and part B include measurements and graphs.
The results obtained in part B will be reviewed and compared with the calculations from section A.
These will be assessed progressively according to individual task criteria and each student is required to complete all the parts/tasks for each laboratory exercise.
All laboratory exercises must be undertaken according to safe working practice and performed according to specified laboratory standards and practice including calibration, measurement and accurate reading. This must include electrical measurement taken with safe working practice, meters properly calibrated, meter settings positioned for an accurate reading and accurate readings taken for all measurements.
2. Project (10%)
A project has to be undertaken toward the end of the unit, in a controlled environment for the specified duration in order to perform tasks autonomously.
The project circuits can be constructed using either hard ware or MultiSim (design / test) simulation computer package. Each student will complete all parts of the project individually and will be asked by the supervisor to demonstrate that the circuit is functioning according to specifications. Each student is required to complete a written report includes three major parts: calculations, circuit diagrams / measurement and results / conclusion.
3 Written Test (20%)
Theoretical concept covered in weeks 1 to 8 will be assessed by a written test in week 9.
4. Written Exam (50%)
Theoretical concept covered in weeks 9 to 16 will be assessed by a written Exam in week 17 / 18 (exams period).
 


Assessment Matrix

 

Competency National
Code
 

Competency Title

Assessment Types

UEENEEE104B
 
Solve problems in d.c. circuits lab Assignment Project/
Presentation
 
Test Industrial
practice
 
   

X

   X X  

Other Information

Minimum student directed hours are 16 in addition to 64 scheduled teaching hours. Student directed hours involve completing activities such as reading online resources, project, preparing for test and exam, student teacher course related consultation, and reports.

Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:

Assignment writing, thesis writing and study skills advice
Maths and science developmental support and advice
English language development

Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support

Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit

Late submission:

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special consideration:
Please Refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information about special consideration

Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.

Other Information:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
 

Course Overview: Access Course Overview