Course Title: Install and configure network systems for internetworking

Part B: Course Detail

Teaching Period: Term2 2013

Course Code: COSC6149C

Course Title: Install and configure network systems for internetworking

School: 130T Vocational Engineering

Campus: City Campus

Program: C6121 - Advanced Diploma of Computer Systems Engineering

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vocengineering@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Noor Sateh
Telephone: +61 3 9925 4013
Email: noor.steh@rmit.edu.au


Divya Anshu Bhardwaj
Telephone: + 61 3 9925 4163
Email:divya.bhardwaj@rmit.edu.au

Anu Mehta
Telephone: +61 3 9925 4252
Email: anu.mehta@rmit.edu.au

 

Nominal Hours: 120

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

UEENEEE101A

Course Description

This competency standard unit covers the interconnection of networks. It encompasses safe working practice, basic installation and configuration of routers and documenting installation and configuration activities.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

UEENEED117A Install and configure network systems for internetworking

Element:

1 Prepare to install and configure internetworking systems.

Performance Criteria:

1.1 OHS processes and procedures for a given work area are obtained and understood.
1.2 Established OHS risk control measures and procedures in preparation for the work are followed.
1.3 The extent of internetworking to be installed and configured is determined from internetworking performance specifications and in consultations with relevant persons.
1.4 Media and software required for internetworking is selected in accordance with organisation’s established procedures.
1.5 Network cabling test reports are obtained and reviewed to determine whether it complies with the required regulatory and performance standard.
1.6 Activities are planned to meet scheduled timelines in consultation with others involved on the work.
1.7 Appropriate development tools and software are selected based on specified requirements and performance standard.
1.8 Strategies are implemented to ensure network development is carried out efficiently.

Element:

2 Install and configure internetworking systems.

Performance Criteria:

2.1 OHS risk control measures and procedures for carrying out the work are followed.
2.2 Knowledge of internetworking arrangements, subnetting and routing protocols are applied to installing and configuring routers and TCP/IP addresses.
2.3 Routing protocols are selected and configured as per requirements specified for the internetworking systems.
2.4 Common routing, TCP/IP and access malfunctions are identified and rectified using known solutions drawing knowledge of basic internetworking arrangements and protocol.
2.5 Approaches to issues/problems are analysed to provide most effective solutions.
2.6 Quality of work is monitored against personal performance agreement and/or established organizational or professional standards.

Element:

3 Report install and configuring of internetworking systems.

Performance Criteria:

3.1 Written justification is made for internetworking installation and configuring activities and appropriate person/s notified in accordance with established procedures.
3.2 Network services records are maintained in accordance with established procedures


Learning Outcomes


Refer to Elements


Details of Learning Activities

You will participate in a variety of teaching methods including: lectures, practicals, and online quizzes. You will be offered training through Cisco Networking Academy Program for this competency. This training prepares you for the Cisco Certified Network Associate (CCNA) Certification Exam.

In this unit you will learn:
About occupational health and safety issues.
Develop an awareness of the OH&S procedures for a work area.
How to identify risks in a work environment.
How to control risks in a work environment.

Lectures: Introduce important concepts.
Attending lectures will make it easier for you to understand the central concepts of the course.
You will feel comfortable and you will learn more if you read the relevant material before you attend the lectures
Practical exercises: Provide you the hands on experience in implementing and troubleshooting networks. In general there will be one practical exercise per week. You will perform the exercise and write it up in a lab journal. The lab journal will be a bound exercise note book.
Loose leaf binders will not be accepted. The write up will be a record of your actions and observations as they are performed. The write up must be performed in the lab as you perform the practical exercise, not at a later date. Write ups not in the lab journal will not be marked.
Write ups which are not done concurrently with the performance of the practical exercise will not be marked.
In general the detail of the write up must be sufficient for you to be able to comfortably perform the practical exercise a year, or more later, directly from the lab journal. Any difficult or subtle points should be especially noted in the lab journal for future reference. Responses to worksheets for practical exercises must be written up in the lab journal. The neatness, completeness and the presentation of the lab journal must be of a quality such that you would be prepared to show it to a future employer as an example of your work.

Work simulated activities: You will progressively implement a networking scenario as you would in industry. You will be expected to work on a networking scenario progressively as you learn the material. Leaving the work to a late stage and then rushing to complete it is poor industrial practice. It will be strongly discouraged. You will be expected to meet progressive milestones in the completion of this activity.

Test and online quiz:
There will be weekly quizzes to assist your progress in the course. You will be required to read and study at least one chapter of the course content per week. The will be an on-line final test at the end of semester covering all topics.

Occupational Health and Safety:
Conduct in lecture theatres, classrooms and laboratories will be of a standard required by OH&S legislation as applied to industry. You must behave in such a way as not to place the health and safety of yourself or anyone else at risk. Covered shoes must be worn in all labs. Thongs and sandals must not be worn in any lab.

Preparation for the Work place:
All skills and knowledge in this course are oriented towards current industry practices and technologies. An essential industry expectation is that you are responsible for your behaviour and actions. When you are employed you will be expected to attend work on time on a regular basis, perform you work on time to an accepted standard and be responsible for what you undertake. Industry will expect you to comprehend and follow both verbal and written instructions. All industry expectations will be applied to you in this course. You will be expected to observe all Occupational Health and Safety requirements. You must behave in such a way as not to place the health and safety of yourself or anyone else at risk.

Prepare for classes:
Attend all classes regularly and on time. Use your class time in a productive and responsible manner. Finish your work on time to an accepted standard. Pay attention to, comprehend and follow both verbal and written instructions. It is your personal responsibility to be aware of course requirements and timelines. Please ask if something is not clear.

The Preparation for the Workplace component will be an essential part of the assessment for this course. It will be included in the assessment of the practical and work simulated activities
 

Activities Outside of Class:
It is expected that students allocate at least 30% of course hours for reading, independent study, design, implementation, testing and problem solving activities.
 


Teaching Schedule

This course is accredited by Engineers Australia.
Engineers Australia Attributes:

Professional AttributesHow course addresses Engineering Australia professional attributesHow assessment addresses professional Attributes  Formula based understandingProcedural-level understandingPractical knowledge and skillsApplication of methodsApplication of toolsEffective Communication
Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice areaFrequent tests and quizzes
An understanding of the mathematics, numerical analysis, statistics, and computer and information sciencesAssessment by way of exams and
laboratory reports
 
In depth practical knowledge and skills within specialist sub-disciplines of the practice areaFollowing up specialist areas within theoretical and practical work
Application of established technical and practical methods to the solution of well defined engineering problemsAssessed through laboratory work
Application of technical and practical techniques, tools and resources to well defined engineering problemsAssessed through laboratory work
Presentation of subject material in the most up to date manner.Assessment by way of
laboratory reports
 

Week 1:
Introduction to Course and Assessment Criteria
Lecture: Introduction to Routing & Packet Forwarding
Lab: Basic Router Configuration
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8

Week 2:
Lecture: Static Routing
Lab: Basic Static Route Configuration
Quiz: Online.
UEENEED117A 1.3,1.4,1.5,1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
UEENEED117A 3.1, 3.2

Week 3:
Lecture: Introduction to Dynamic Routing Protocols
Lab : Sub-netting Scenario
Quiz: Online
UEENEED117A 1.3,1.4,1.5,1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6

Week 4:
Lecture: Distance Vector Routing Protocols
Lab: Routing Table Interpretation
Quiz: Online
UEENEED117A 1.3,1.4,1.5,1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6

Week 5:
Lecture: RIP version1
Lab: Basic RIP Configuration
Quiz: Online
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
UEENEED117A 3.1, 3.2

Week 6:
Lecture: VLSM and CIDR
Lab: Basic VLSM Calculation and Addressing Design
Quiz: Online
UEENEED117A 1.3,1.4,1.5,1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6

Week 7:
Lecture : Review of Lectures
Lab :Review for Practical Test 1
Quiz: Online
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6

Week 8:
Lecture: RIP Version 2
Lab: Open Book Practical Test 1
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6

Week 9:
Lecture: The Routing Table-A Closer Look
Lab: Basic RIPv2 Configuration Lab
Quiz: Online
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
UEENEED117A 3.1, 3.2
Week 10:
Lecture: EIGRP
Lab: Investigating the Routing Table Lookup Process
Quiz: Online
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
UEENEED117A 3.1, 3.2

Week 11:
Lecture: EIGRP (continued)
Lab: Basic EIGRP Configuration
Quiz: Online
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
UEENEED117A 3.1, 3.2

Week 12:
Lecture: Link State Routing Protocols
Lab: Basic Route Summarization
Quiz: Online
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
UEENEED117A 3.1, 3.2

Week 13:
Lecture: OSPF
Lab: Basic OSPF Configuration
Quiz: Online
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
UEENEED117A 3.1, 3.2

Week 14:
Lecture: OSPF (continued)
Lab: Challenge OSPF Configuration
Quiz: Online
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
UEENEED117A 3.1, 3.2

Week 15:
Lecture: Review of difficult topics
Lab: Review for Practical Test
Quiz: Online
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6

Week 16:
Lecture: Review of Lectures
Lab: Open Book Practical Test 2
UEENEED117A 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8
UEENEED117A 2.1, 2.2, 2.3, 2.4, 2.5, 2.6

Week 17:
Closed Book Online Test
Closed Book Written Test
 

Week 18
Catchup Session
 


Learning Resources

Prescribed Texts


References


Other Resources

https://www.netacad.com/. To access the learning material via this Cisco website individual login account shall be given in the first week of Semester 2.


Overview of Assessment

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:

Assessment 1: Practical Test 1
Weighting towards final grade (%): 25

Assessment 2: Practical Test 2
Weighting towards final grade (%): 25

Assessment 3: Closed Book Online Test/Written Test
Weighting towards final grade (%): 10 + 40

These tasks assesses the following Course Learning Outcomes (CLOs):

Assessment Mapping Matrix

Elements/Performance CriteriaPractical TestsClosed Book Online Test/Written Test
1.1xx
1.2 X
1.3X 
1.4X 
1.5X 
1.6XX
1.7XX
1.8XX
2.1XX
2.2XX
2.3XX
2.4X 
2.5XX
2.6XX
3.1XX
3.2XX

 

 

 

 


Assessment Tasks

You are required to complete the following assessment tasks in semester 1 and semester 2:

Assessment Task

1.  Open Book Practical Tests (50%) Week 8, 16
2. Closed Book Online Test/Written Test (50%) Week (1-17)

This course is graded using the following course grades-
CHD- Competent with High Distinction
CDI- Competent with Distinction
CC- Competent with Credit
CAG- Competency Achieved - Graded
NYC- Not Yet Competent
DNS- Did Not Submit for Assessment

Make sure you understand the special consideration policy available at:
http://www.rmit.edu.au/browse;ID=qkssnx1c5r0y.
 


Assessment Matrix

 

Assessment TaskElement
Open Book Practical Tests1, 2, 3
Closed Book Online Test/Written Test1, 2, 3
  

 


 

 

Other Information

In this course, minimum student directed hours are 32 in addition to 88 scheduled teaching hours.
Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation, lab journals.

Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:
Assignment writing, thesis writing and study skills advice.
Maths and science developmental support and advice.
English language development.
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support.

Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.

Late submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and
lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.

Special consideration:
Please Refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information about special consideration.

Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
 

Other information: all email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

Course Overview: Access Course Overview