Course Title: Assemble, set-up and test computing devices

Part B: Course Detail

Teaching Period: Term2 2017

Course Code: EEET7066C

Course Title: Assemble, set-up and test computing devices

School: 174T School of VE Engineering, Health & Science

Campus: City Campus

Program: C6121 - Advanced Diploma of Computer Systems Engineering

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vhes@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Divya Anshu Bhardwaj

PH: +61 3 9925 4163
Email: divyaanshu.bhardwaj@rmit.edu.au

 

Amandeep Kaur

PH: +61 3 9925 4444

Email: amandeep.kaur@rmit.edu.au

Nominal Hours: 80

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

UEENEEE101A

Course Description

This unit covers assembly, setting up and testing personal computers as directed in computer service manuals. It encompasses safe working practices, checking computer components, assembling components to form a basic personal computer, installing and testing basic operating system, drivers and application software, following written and oral instruction and applying customer relations procedures.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

UEENEED102A Assemble, set-up and test computing devices

Element:

1 Assemble computing devices

Performance Criteria:

1.1 OHS procedures for a given work area are identified, obtained and understood through established routines and procedures.
1.2 Established OHS risk control measures and procedures in relation to computer and keyboard use are followed.
1.3 Advice is sought from the work supervisor to ensure the work is co-ordinated effectively with others.
1.4 Computer, components, operating system and application software are obtained in accordance with established routines and checked as meeting requirements.
1.5 Computer components are assembled and connected in accordance with manufacturer’s instructions.
1.6 Routine quality checks are carried out in accordance with work instructions.
1.7 Procedures are followed for referring non-routine events to immediate supervisor for directions.

Element:

2 Install operating system and application software

Performance Criteria:

2.1 Established OHS risk control measures and procedures for carrying out the work are followed.
2.2 Minimum hardware requirements are established that are appropriate for the operating system that will be installed.
2.3 Computer is started up and on-screen instructions for the installation of the operating system to default configuration are followed, including drivers and network interfaces.
2.4 Application software is installed to default configuration following on-screen installation instruction.
2.5 Ensure authentication and data security and integrity is implemented on a computing device which may include antivirus and logins.
2.6 Computer shutdown procedures are followed and computer switched off.
2.7 Routine quality checks are carried out in accordance with work instructions.
2.8 Procedures for referring non-routine events to immediate supervisor for directions are followed.

Element:

3 Test computer operation

Performance Criteria:

3.1 Established OHS risk control measures and procedures for carrying out the work are followed.
3.2 Computer is switched on and start-up procedures are followed and checked.
3.3 Operating system and application programs are checked to be opening and operating correctly.
3.4 Faults are identified as being the result of faulty hardware or software.
3.5 The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures.
3.6 Faults are rectified in accordance with computer hardware, operating system and application instructions.
3.7 Procedures for referring non-routine events to immediate supervisor for directions are followed.
3.8 Computer shutdown procedures are followed and computer switched off.
3.9 Work is carried out efficiently without waste of materials or damage to apparatus, circuits, the surrounding environment or services and using sustainable energy principles.

Element:

4 Complete work and report

Performance Criteria:

4.1 OHS risk control work completion measures and procedures are followed.
4.2 Work area is cleaned and made safe in accordance with established procedures.
4.3 Work supervisor is notified of the completion of the work in accordance with established procedures.


Learning Outcomes


Refer to Elements


Details of Learning Activities

You will be involved in the following learning activities to meet requirements for the three clustered competencies ( UEENEED102A, UEENEEE117A, UEENEED143A) and stage 1 competencies for Engineering Associates:

  • Lectures
  • Practical work
  • Research work and Presentation


Cluster Information:
This course is delivered in a cluster (Computer Technology) in conjunction with:
UEENEEE117A Implement and monitor energy sector OHS policies and procedures,
UEENEED143A Install and configure a client computer operating system and software
The learning and assessment activities will include all the components of competencies UEENEED102A, UEENEEE117A andUEENEED143A.

Elements and Criteria for UEENEEE117A (OHTH5730C)

1 Provide OHS information to the work group.
1.1 Relevant provisions of occupational health and safety legislation and codes of practice are accurately and clearly explained to the work group.
1.2 Information on the organisation’s occupational health and safety policies, procedures and programs is provided in a readily accessible manner and is accurately and clearly explained to the work group.
1.3 Information about identified hazards and the outcomes of risk assessment and risk control procedures is regularly provided and is accurately and clearly explained to the work group.
2 Implement and monitor participative arrangements for the management of OHS.
2.1 Organisational procedures for consultation over occupational health and safety issues are implemented and monitored to ensure that all members of the work group have the opportunity to contribute.
2.2 Issues raised through consultation are dealt with and resolved promptly or referred to the appropriate personnel for resolution in accordance with workplace procedures for issue resolution.
2.3 The outcomes of consultation over occupational health and safety issues are made known to the work group promptly.
3 Implement and monitor the procedures for identifying hazards, assessing risk and controlling risks.
3.1 Existing and potential hazards in the work area are identified and reported so that risk assessment and risk control procedures can be applied.
3.2 Work procedures to control risks are implemented and adherence to them by the work group is monitored in accordance with workplace procedures.
3.3 Existing procedures to control risks are implemented and adherence to them by the work group is monitored in accordance with workplace procedures.
3.4 Inadequacies in existing risk control measures are identified in accordance with the hierarchy of control and reported to designated personnel.
3.5 Inadequacies in resource allocation for implementation of risk control measures identified and reported to designated personnel.
4 Implement the procedures for dealing with hazardous events.
4.1 Workplace procedures for dealing with hazardous events are implemented whenever necessary to ensure that prompt control action is taken.
4.2 Hazardous events are investigated to identify their cause in accordance with investigation procedures.
4.3 Control measures to prevent recurrence and minimise risks of hazardous events are implemented based on the hierarchy of control if within scope of responsibilities and competencies or alternatively referred to designated personnel for implementation.
5 Implement and monitor the procedures for OHS training.
5.1 Occupational health and safety training needs are identified accurately, specifying gaps between occupational health and safety competencies required and those held by work group members.
5.2 Arrangements are made for fulfilling identified occupational health and safety training needs in both on and off-the-job training programs in consultation with relevant parties.
6 Implement and monitor the procedures for maintaining OHS records.
6.1 Occupational health and safety records for work area are accurately and legibly completed in accordance with workplace requirements for occupational health and safety records and legal requirements for the maintenance of records of occupational injury and disease.
6.2 Aggregate information from the area’s occupational health and safety records is used to identify hazards and monitor risk control procedures within work according to organisational procedures and within scope of responsibilities and competencies.

Elements and Criteria for UEENEED143A (EEET7068C)

1 Prepare to install and configure a computer operating system and software.
1.1 OHS procedures for a given work area are identified, obtained and understood.
1.2 Established OHS risk control measures and procedures are followed in preparation for the work.
1.3 The scope of work to be undertaken is determined from documentation or from discussions with work supervisor.
1.4 Operating system and application software versions as required for the installation are obtained in accordance with established procedures and checked against job requirements.
2 Upgrade computer and peripheral software.
2.1 OHS risk control measures and procedures for carrying out the work are followed.
2.2 Operating system and application and network software components are installed in accordance with installation instructions and industry practices.
2.3 Operating system, software applications and network, including device drivers, are tested in preparation for return to service/customer.
2.4 Operating system network and software malfunctions are identified using logical techniques drawing on knowledge of operating system configuration requirements.
2.5 Malfunctions are rectified using latest software versions, incremental updates and bug and security patches.
2.6 Methods for dealing with unexpected situations are decided on the basis of safety and required work outcomes.
2.7 Installation and configuration is carried out efficiently without waste of materials and energy or damage to apparatus, the surrounding environment or other services.
3 Complete and report upgrading and maintenance activities.
3.1 OHS work completion risk control measures and procedures are followed.
3.2 Work area is cleaned and made safe in accordance with established procedures.
3.3 Operating system network and software installation is documented and appropriate person(s) notified in accordance with established procedures.

Engineers Australia Mapping Information:

This course and other two clustered competencies are mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:

 EA 1. Knowledge and Skill Base

EA 1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.

EA 2. Engineering Application Ability

EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.

EA 2.4. Application of systematic project management processes.

 

EA 3. Professional and Personal Attributes

EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.

 

 Engineers Australia Stage 1 Competencies are mapped with the cluster of competencies UEENEED102A, UEENEEE117A and UEENEED143A in the Assessment Matrix.
 


Teaching Schedule

The proposed teaching schedule for the 3 clustered competencies (UEENEED102A, UEENEED143A and UEENEEE117A) is detailed below.

 

 

Week

Topics Delivered

Elements/Performance criteria

1

Introduction to course:
    Review course guide.
    Overview of course content.
    Review assessment.
    Review resources.
    OH&S issues.

Computer project information (10%). Due weeks 14 - 16.
Lecture/tutorial: Introduction to the PC.
Laboratory session

UEENEED102A 1, 4
UEENEED143A 1, 3
UEENEEE117A 1

2

Lecture/tutorial: Safe lab procedures.
Lecture/tutorial: OH&S: legislation, organisational policies and procedures, hazard identification.
Laboratory session

UEENEED102A 1, 2, 3
UEENEED143A 1, 3, 4
UEENEEE117A 1, 2, 3

3

Lecture/tutorial: Assembling a PC.
Lecture/tutorial: OH&S - Implementation and monitoring of organisational procedures.
Laboratory session

 Research Work : Q&A sheet 1(2%) will be handed to the students and is due in week 5

UEENEED102A 1, 2, 3, 4
UEENEED143A 3
UEENEEE117A 1, 2

4

Lecture/tutorial: Preventative maintenance and troubleshooting.
Lecture/tutorial: OH&S - Hazard identification and assessment, reporting, monitoring and control procedures.
Laboratory session

UEENEED102A 2, 3, 4
UEENEED143A 2, 3, 4
UEENEEE117A 1, 2, 3

5

Lecture/tutorial: Installing Operating Systems
Lecture/tutorial: OH&S - Implementing procedures for controlling and dealing with hazardous events.Laboratory session

 Research Work : Q&A sheet 1(2%) is due. 

UEENEED102A 2, 3, 4
UEENEED143A 2, 3
UEENEEE117A 1, 2

 6

Lecture/tutorial: Configuring Operating Systems

Lecture/tutorial: OH&S - implement and monitor procedures for OH&S training.
 Laboratory session
Research Work : Q&A sheet 2(2%) will be handed to the students and is due in week 8

UEENEED102A 1, 2, 3, 4
UEENEED143A 1, 2
UEENEEE117A 1, 2

 7

Lecture/tutorial: Networking Concepts.
Lecture/tutorial: OH&S - implement and monitor the procedures for maintaining OH&S records.
Laboratory: 

UEENEED102A 3, 4
UEENEED143A 1, 2
UEENEEE117A 1, 2

8

Lecture/tutorial: Applied Networking.
Lecture/tutorial: OH&S - Lifting and carrying.
Laboratory: OH&S - practical exercise: lifting and carrying.
Laboratory: Practical test 1 (25%)
Research work: Q&A sheet 2(2%) is due.

UEENEED102A 2, 4
UEENEED143A 1, 2, 3
UEENEEE117A 1, 2

9

Lecture/tutorial: Laptops and Mobile Devices.
Lecture/tutorial: OH&S - Electrical safety.
Laboratory session
Research Work : Q&A sheet 3(2%) will be handed to the students and is due in week 11

UEENEED102A 3
UEENEED143A 1, 2, 3
UEENEEE117A 1, 2

10

Lecture/tutorial: Mobile Linux and OSX Operating Systems, Business Communications and Ethics,OH&S issues.

Laboratory session

UEENEED102A 3, 4
UEENEED143A 1, 2
UEENEEE117A 1, 

11

Lecture/tutorial: Printers and OH&S issues
Laboratory session
Research work: Q&A sheet 3(2%) is due.

UEENEED102A 2, 3, 4
UEENEED143A 1, 2
UEENEEE117A 1, 

12

Lecture/tutorial: Security and Advanced Troubleshooting and OH&S issues.

Laboratory session

Research Work : Q&A sheet 4(2%) will be handed to the students and is due in week 14

UEENEED102A 2, 3, 4
UEENEED143A 1, 2
UEENEEE117A 1, 

13

Lecture/tutorial: Project Presentations (10%)

Laboratory session

UEENEED102A 3
UEENEED143A 3
UEENEEE117A 1, 2

14

Lecture/tutorial: Project presentations (10%).
Laboratory: Laboratory catch up and revision

Research work: Q&A sheet 4(2%) is due.

UEENEED102A 2, 3, 4
UEENEED143A 1, 2, 3
UEENEEE117A 1, 2, 3

15

Lecture/tutorial: Project presentations (10%).
Laboratory: Laboratory test 2 Group 1 (25%)

Research Work : Q&A sheet 5(2%) will be handed to the students and is due in week16

UEENEED102A All
UEENEED143A All
UEENEEE117A All

16

Lecture/tutorial: Project Report Submission

Laboratory: Laboratory test 2 Group 2 (25%)

Research work: Q&A sheet 5(2%) is due.

 

UEENEED102A All
UEENEED143A All
UEENEEE117A All

17

 

Closed book test ( 30%).

UEENEED102A All
UEENEED143A All
UEENEEE117A All

18

Finalisation

 

Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is minimum 20 hours outside the class time.


Learning Resources

Prescribed Texts

 

On line content:  http://www.netacad.com  IT Essentials PC Hardware and Software Course Booklet, Version 5


References


Other Resources

Resource materials will be available on myRMIT>Studies>EEET7066C.


Overview of Assessment

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:

 

Assessment 1: Research Work and Presentation 

Weighting towards final grade: (%): 10+10 = 20%

Assessment 2: Practical Tests
Weighting towards final grade (%): 50 (2 x 25%)

Assessment 3: Closed Book Test
Weighting towards final grade (%): 30%

these tasks assesses the following Course Learning Outcomes (CLOs):

Assessment Mapping Matrix 

Element/Performance Criteria Covered

Research Work and Presentation 

Practical Tests

Closed book Test

1.1

x

x

x

1.2

x

x

x

1.3

x

x

x

1.4

x

x

x

1.5

x

x

x

1.6

x

x

x

1.7

x

x

x

2.1

x

x

x

2.2

x

x

x

2.3

x

x

x

2.4

x

x

x

2.5

x

x

x

2.6

x

x

x

2.7

x

x

x

2.8

x

x

x

3.1

x

x

x

3.2

x

x

x

3.3

x

x

x

3.4

x

x

x

3.5

x

x

x

3.6

x

x

x

3.7

x

x

x

3.8

x

x

x

3.9

x

x

x

4.1

x

x

x

4.2

x

x

x

4.3

x

x

x

 

 

 

 

 

 

 


Assessment Tasks

Overview of Assessment

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks section of Course Guide Part B.

UEENEEE117A,UEENEED102A, UEENEED143A:
Assessment 1: Research Work and Presentation (Weeks 3 - 16)

Weighting towards final grade: (%): 10+10 = 20%

Assessment 2: Practical Tests (Weeks 6 and 17)
Weighting towards final grade (%): 50 (2 x 25%)

Assessment 3: Closed Book Test (Weeks 3 - 18)
Weighting towards final grade (%): 30%

 

This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:
80 - 100: CHD - Competent with High Distinction
70 - 79: CDI - Competent with Distinction
60 - 69: CC - Competent with Credit
50 - 59: CAG - Competency Achieved - Graded
0 - 49: NYC - Not Yet Competent
DNS - Did Not Submit for Assessment.


Assessment Matrix


Assessment vs UEENEEE117A Elements & Performance Criteria

 

UEENEEE117A Elements & Performance Criteria

Assessments

1.1

1.2

1.3

2.1

2.2

2.3

3.1

3.2

3.3

3.4

3.5

4.1

4.2

4.3

5.1

5.2

6.1

6.2

                  

Research Work and Presentation

 x x x x x x x x x x x x x x x x                  
Practical Tests x x x x x x x x x x x x                  

Closed book Test

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

                  

 

 Assessment vs UEENEED102A Elements & Performance Criteria

  UEENEED102A Elements & Performance Criteria
 Assessments 1.11.21.31.41.51.61.72.12.22.32.42.52.62.72.83.13.23.33.43.53.63.73.83.94.14.24.3
Research work and presentationxxxxxxxxxxxxxxxxxxxxxxxxxxx
Practical Testsxxxxxx x x x x xx xxxxxxx x x x x x xxx
Closed book Testxxxxxxxxxxxxxxxxxxxxxxxxxxx

 

 Assessment vs UEENEED143A Elements & Performance Criteria

  UEENEED143A Elements & Performance Criteria
 Assessments 1.1 1.21.3  1.4 2.12.2 2.3  2.4 2.5 2.6 2.7 3.13.2  3.3
 Research work and presentation x x x x x x x x x x x x x x
 Practical Test x x x x x x x x x x x x x x
 Closed book Test x x x x x x x x x x x x x

 

 Assessment vs Engineers Australia Stage 1 Competencies

 

Engineers Australia Stage 1 Competencies

Assessments

EA1.1

EA1.2

EA1.3

EA1.4

EA1.5

EA1.6

EA2.1

EA2.2

EA2.3

EA2.4

EA3.1

EA3.2

EA3.3

EA3.3

EA3.4

EA3.5

EA3.6

Research work and Presentation

 

 

 

 

x

 

 

x

x

x

x

x

x

x

x

x

x

Practical Test

 

 

x

x

x

x

 

x

 

x

x

x

x

 

x

x

x

Closed book Test

 x

x

x

x

x

x

x

x

x

 

 

 

 

 

 

 

ALL ASSESSMENTS
UEENEEE117A

0

0

2

0

2

2

2

3

0

3

3

1

2

1

2

2

0

ALL ASSESSMENTS
UEENEED102A

1

1

2

2

2

2

2

3

1

3

1

2

2

1

2

2

2

ALL ASSESSMENTS
UEENEED143A

1

1

2

2

2

2

2

3

1

3

1

2

2

1

2

2

2

0 (blank)

Graduate attribute is not assessed.

1

Graduate attribute is assessed in at least one, but less than one-third, of the Element.

2

Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element.

3

Graduate attribute is assessed in more than two-thirds of the Element.

Other Information

Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:

  • Relevant
  • Current
  • Satisfies the learning/competency outcomes of the course

Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL

Study and learning Support:

Study and Learning Centre (SLC) provides free learning and academic development advice to you. 
Services offered by SLC to support your numeracy and literacy skills are: 

  • assignment writing, thesis writing and study skills advice 
  • maths and science developmental support and advice 
  • English language development 

Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support 

Equitable Learning Services (ELS):

If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).

Late submission: 

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager. 
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted. 
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date. 

Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked. 


Special consideration: 

Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration 

Plagiarism: 

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University. 

Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism. 

Other Information: 

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

 

Course Overview: Access Course Overview