Course Title: Implement site investigation procedures
Part B: Course Detail
Teaching Period: Term2 2016
Course Code: BUIL6240
Course Title: Implement site investigation procedures
School: 130T Vocational Engineering
Campus: City Campus
Program: C6132 - Advanced Diploma of Engineering Technology
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: firstname.lastname@example.org
Name and Contact Details of All Other Relevant Staff
Dr A R M Muniruzzaman
Phone: +61 3 9925 4415
Mr Ahmet Ertuncay
Phone: +61 3 9925 8375
Nominal Hours: 60
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
This unit of competency sets out the knowledge and skills required to apply site investigation procedures and geological studies, through an understanding of engineering soils, major rock and mineral types, in accordance with AS 1726. This includes tests that are common to the behaviour of engineering soils, in accordance with AS 1289.
No Licencing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title:
VU21124 Implement site investigation procedures
1. Identify site location and materials to be tested and analysed
1.1 OH&S and environmental requirements for a given work area are obtained and understood.
1.2 Established OH&S requirements and risk control measures and procedures are followed in preparation of the work area.
1.3 Safety hazards which have not previously been identified are documented and risk control measures devised and implemented in consultation with appropriate personnel.
1.4 The site location, testing and analysis task are identified from documentation, work requests or discussions with appropriate personnel.
1.5 Appropriate personnel are consulted to ensure the work is co-ordinated effectively with others involved at the work site.
1.6 Resources and equipment needed for the task are obtained in accordance with enterprise procedures and checked for correct operation and safety.
2. Plan test and analyse
2.1 OH&S requirements for carrying out the work are followed.
2.2 Equipment/machines and procedures are checked as being in accordance with OH&S requirements.
2.3 The history of the site and materials to be tested are identified and recorded.
2.4 Test equipment is checked for calibration and conforming to Australian Standard.
2.5 Materials to be tested are prepared to Australian and/or local standards or regulations in accordance with enterprise procedures.
3. Conduct test and analyse results
3.1 OH&S requirements for carrying out the work are followed.
3.2 Equipment/machines/plant are checked as being isolated in strict accordance with OH&S requirements, where necessary.
3.3 Test is conducted to job requirements in accordance with Australian Standards.
3.4 Test equipment is operated/used to Australian Standards.
3.5 Results are recorded and analysed.
3.6 Decisions for dealing with unexpected situations are made from discussions with appropriate personnel, job specifications and enterprise procedures.
3.7 Methods for dealing with unexpected situations are selected on the basis of safety and specified work outcomes.
4. Document and report results
4.1 OH&S requirements for completing the work are followed.
4.2 Results are recorded, analysed and reported according to enterprise procedures.
4.3 Results are stored and archived according to enterprise procedures.
Refer to Elements
Details of Learning Activities
You will be involved in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates.
• Review questions
• Case projects
• Lab journal
Engineers Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:
EA 1. Knowledge and Skill Base
EA1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.
EA 2. Engineering Application Ability
EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.
EA 3. Professional and Personal Attributes
EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.
Engineers Australia Stage 1 Competencies are mapped with competency VU21124 in the Assessment Matrix.
The proposed teaching schedule for this competency is detailed below:
|Week||Topics Delivered ||Elements/Performance Criteria|
|1||Identification and documentation of OH&S issues and environmental requirements in the lab and in the field, and methods of reporting control measurements to appropriate personnel. |
Selection of site location, testing methods, and test equipment in accordance with enterprise procedures.
|1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 2.1, 3.1, 4.1|
|2||Planning, testing and analysing rock and soil tests (geological and geotechnical classifications of soils and rocks, point load testing)||2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 4.1, 4.2|
|3||Geological and geo-physical site investigation methods||2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 4.1, 4.2|
|4||Site observation, supervision and site investigation methods||1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4, 3.5,3.6,3.7, 4.1, 4.2|
|5||Rock and soil sampling methods||2.1, 2.2, 3.1, 3.2|
|6||Formative assessment (30%)|
|7-8||Soil classification tests (Atterberg Limits and Sieve Analysis)||2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 4.1, 4.2|
|9-10||Soil physics (soil mass, volume, density and specific gravity calculcations, particle density test)||2.3, 3.5, 4.2|
|11||Standard Penetration Test (SPT), California Bearing Ratio (CBR) test||2.1, 2.2, 2.3, 2,4, 2.5, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 4.1, 4.2|
|12||Soil permeability (Constant Head and Falling Head tests)||2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 4.1, 4.2|
|13||Determination of soil properties from Triaxial and Direct Shear test||2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 4.1, 4.2|
|14-15||Compaction test (Standard and Modified)||2,1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 4.1, 4.2|
|16||The behaviour of engineering soils and soil stabilization methods, and consolidation of soils||1.4, 2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 4.1, 4.2|
|17-18||Final Test (closed book)|
Overview of Assessment
Assessments are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.
Assessment 1: Written Test 1
Weighting towards final grade (%): 35
Assessment 2: Practical laboratory tests
Weighting towards final grade (%): 30
Assessment 2: Written Test 2
Weighting towards final grade (%): 35
These tasks assesses the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
|Element/Performance Criteria Covered||Written Test 1||Practical laboratory tests||
- Formative assessments 30%
- Practical Laboratory Tests 30%
- Final Test (closed book) 40%
The practical laboratory tests and the final test must be completed successfully to be eligible to be deemed competent.
This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:
80 - 100: CHD - Competent with High Distinction
70 - 79: CDI - Competent with Distinction
60 - 69: CC - Competent with Credit
50 - 59: CAG - Competency Achieved - Graded
0 - 49: NYC - Not Yet Competent
DNS - Did Not Submit for Assessment.
Assessment vs VU21124 Elements & Performance Criteria
|VU21124 Elements & Performance Criteria|
|Practical laboratory tests||X||X||X||X||X||X||X||X||X||X||X||X||X||X||X||X||X||X||X||X||X|
Assessment vs Engineers Australia Stage 1 Competencies
|Engineers Australia Stage 1 Competencies|
|Practical laboratory tests||x||x||x||x||x||x||x||x||x||x||x||x||x|
|All Assessments VU21124||3||3||3||1||2||3||3||1||1||1||3||2||2||1||1||1|
|0 (Blank)||Graduate attribute is not assessed.|
|1||Graduate attribute is assessed in at least one, but less than one-third, of the Element|
|2||Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element|
|3||Graduate attribute is assessed in more than two-thirds of the Element|
• Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities. The estimated time is minimum 20 hours outside the class time.
Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
• Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
Study and Learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:
- Assignment writing, thesis writing and study skills advice
- Maths and science developmental support and advice
- English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date. Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Please refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: http://www.rmit.edu.au/academicintegrity to find more information about plagiarism.
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview