BH086 - Bachelor of Engineering (Adv Manufacturing & Mechatronics)(Hons)/Bachelor of Business(Intern Bus)

Go to Student Program Guide Search

RMIT program code: BH086
Plan name: Bachelor of Engineering (Adv Manufacturing & Mechatronics)(Hons)/Bachelor of Business (Intern Bus)
Plan code: BH086AMHDD
Campus: City Campus
Credit points per semester:
Full time: 48
Part time: 24
CRICOS code: 079780C

Contact details and related links


2017 Enrolment Program Structure

For students who commence their study in this program from 1 January 2016 onwards, please note that some courses listed in this structure will have their course marks count toward your program's weighted average mark. Your weighted average mark will determine the honours level of your award once you have completed the program. If a course counts toward your weighted average mark, that fact will be stated in its course guide. In Enrolment Online, after you completed your course enrolment, you will be notified which of the enrolled courses will count toward the weighted average mark.

  Year One of Program
 
AND  Year Two of Program
 
AND  Year Three of Program
 
AND  Year Four of Program
 
AND  Year Five of Program
 

For more information about the weighted average mark, please click here

To graduate you must complete the following:

ALL core courses listed in Years 1 to 5 of the Program, and appropriate Electives giving a total of 528 credit points.

AT LEAST 12 weeks of Engineering Work Experience, as described below.

Total credit points must be accumulated by obtaining a pass grade or approved credit transfer (exemptions) for all core courses listed below and appropriate electives.

**PLEASE NOTE: This degree contains courses that are taught at the Bundoora campus. Students will need to complete these courses for the successful completion of the degree.

PREREQUISITES:  You are required to successfully complete any prerequisite course/s before undertaking the next level of course and to follow the sequence of the academic plan unless approval to vary is given by the Program Manager. This is intended to help you maximise your attainment of the Learning Outcomes of this Program. 

ENGINEERING WORK EXPERIENCE: Students are required to have completed Engineering Work Experience to satisfy the requirement that engineering graduates must have undertaken approximately 12 weeks of work experience in a relevant professional engineering workplace, or had experiences equivalent to such 12 weeks.  Engineering work experience can be undertaken throughout your program of studies, and multiple placements can be used to satisfy the 12 weeks requirement. This activity contributes to the Work Integrated Learning of your program, is a requirement for graduation, and adds significantly to your employability.

When engaged in the engineering employment students need to be involved in activities that allow them to observe firsthand the sort of work that professional engineers undertake. Ideally students will be assisting a professional engineer and can engage in regular discourse with that mentor. It is not a requirement that positions are paid, or that any position is for the full 12 weeks, and any position that gives exposure to an engineering environment and professional engineers will contribute to the requirement.

The requirement for Engineering Work Experience may be satisfied in a number of ways and you may even choose to use several of these;

·         Employment with a suitable company in Australia or overseas (12 weeks continuously or equivalent in multiple shorter periods at different stages of your program)

·         An extended placement of 6 – 12 months

·         Completion of a final year “Professional Project” supervised by an external professional engineer.

*Top of page


Year One of Program

SUMMER SCHOOL:

To enrol into summer courses for 2017 please use EOL.

PREREQUISITES: You are required to successfully complete any prerequisite course/s before undertaking the next level of course and to follow the sequence of the academic plan unless approval to vary this is given by the Program Manager. This is intended to help you maximize your attainment of the Learning Outcomes of this program. 

Complete the following Nine (9) Courses:

Course Title

Credit Points

Prereqs/ Coreqs

Course Code

Campus

Semester 1 Class

Semester 2 Class

Engineering Mathematics C12YesMATH2117City Campus27403134
Computer Aided Design12MIET2093City Campus1486 (FF)1475 (FF)
Introduction to Management12BUSM4176City Campus23742331
Mechanics and Materials 112MIET2419City Campus1487 (FF)1476 (FF)
Manufacturing Systems12MANU2095City Campus2534 (FF)1478 (FF)
Further Engineering Mathematics C12YesMATH2118City Campus3135
Introduction to Mechatronics12MANU2205City Campus3566 (FF)1633 (FF)
Accounting in Organisations and Society12ACCT1046City Campus18421781
Macroeconomics 112ECON1010City Campus21802130
 
AND

*Top of page


Year Two of Program

SUMMER SCHOOL:

To enrol into summer courses for 2018 please use EOL.

PREREQUISITES:

You are required to successfully complete any prerequisite course/s before undertaking the next level of course and to follow the sequence of the academic plan unless approval to vary this is given by the Program Manager. This is intended to help you maximize your attainment of the Learning Outcomes of this program. 

Complete the following Nine (9) Courses:

Course Title

Credit Points

Prereqs/ Coreqs

Course Code

Campus

Semester 1 Class

Semester 2 Class

Mathematics and Statistics for Manufacturing Engineers12YesMATH2185City Campus3198
Prices and Markets12YesECON1020City Campus21812131
Mechanics and Materials 212YesMIET2115City Campus1491 (FF)1480 (FF)
Engineering Dynamics12MIET2134City Campus1492 (FF)
Marketing Principles12MKTG1025City Campus22492204
Commercial Law12LAW2442City Campus24812395
Global Political Economy12SOCU2112City Campus2682 (FF)2645 (FF)
Electronics12YesEEET2255City Campus1107
International Business12BUSM1222City Campus23612318
 
AND

*Top of page


Year Three of Program

WORK EXPERIENCE: 

You should typically complete a Work Experience position in Engineering during the non-study period at the end of third year. Further details on this are outlined in the graduation requirements above.

PREREQUISITES:

You are required to successfully complete any prerequisite course/s before undertaking the next level of course and to follow the sequence of the academic plan unless approval to vary this is given by the Program Manager. This is intended to help you maximize your attainment of the Learning Outcomes of this program.

**Note: Not all courses may be run in the semester specified below. Make sure you enrol in a balanced load each semester. Please seek advice from your Program Manager if you need advice on completing your enrolment. 

Complete the following Eight (8) Courses:

Course Title

Credit Points

Prereqs/ Coreqs

Course Code

Campus

Semester 1 Class

Semester 2 Class

Global Marketing12YesMKTG1061City Campus22922245
Issues in International Business12BUSM4178City Campus2332
International Human Resources12BUSM2449City Campus23652323
Engineering Computing 112YesEEET2246City Campus1122
Mechanical Design 124YesMIET2420City Campus1481 (FF)
Introduction to Embedded Systems12EEET2256City Campus1131
Global Entrepreneurship12BUSM4054City Campus2330
Strategic Management12BUSM3125City Campus23692327
 
AND

*Top of page


Year Four of Program

WORK EXPERIENCE

You should typically complete your Work Experience requirements before commencing your final year of studies. The details of this are outlined in the graduation requirements above. 

PREREQUISITES:

You are required to successfully complete any prerequisite course/s before undertaking the next level of course and to follow the sequence of the academic plan unless approval to vary this is given by the Program Manager. This is intended to help you maximize your attainment of the Learning Outcomes of this program.

**Note: Not all courses may be run in the semester specified below. Make sure you enrol in a balanced load each semester. Please seek advice from your Program Manager if you need advice on completing your enrolment.

Complete the following Seven (7) Courses:

Course Title

Credit Points

Prereqs/ Coreqs

Course Code

Campus

Semester 1 Class

Semester 2 Class

Materials Engineering12YesMANU1169Bundoora Campus1676 (FF)
Advanced Manufacturing Processes12MANU1170Bundoora Campus1677 (FF)
Automatic Control Systems12YesMANU1174Bundoora Campus1678 (FF)
Design for Assembly and Automation12YesMANU1175Bundoora Campus1635 (FF)
Mechatronic Design12YesMIET2362Bundoora Campus1493 (FF)
Culture and Business Practice in Asia12SOCU1016City Campus2672 (FF)2641 (FF)
Management of Manufacturing Planning and Research12MANU1421Bundoora Campus1636 (FF)
AND

Select and Complete One (1) Course from the following Business Options list:

Course Title

Credit Points

Prereqs/ Coreqs

Course Code

Campus

Semester 1 Class

Semester 2 Class

Employment Relations12BUSM1080City Campus2358
Negotiation and Advocacy Skills12BUSM1074City Campus2357
Applied Entrepreneurship12BUSM4052City Campus2372
Intrapreneurship12BUSM1321City Campus2320
Introduction to Logistics and Supply Chain Management12OMGT1082City Campus21492101
Financial Accounting and Analysis12YesACCT2033City Campus18521791
Management Accounting and Business12YesACCT1060City Campus18451784
Company Law12YesLAW2450City Campus24822396
Financial Markets12BAFI1002City Campus21662116
Business Finance12YesBAFI1008City Campus21672117
International Monetary Economics12YesECON1082City Campus22282184
Internet for Business12ISYS2061City Campus2350 (ONL)2307 (ONL)
Business Information Technology12INTE2043City Campus19541894
Human Resource Development12BUSM1137City Campus2359
Managing Human Performance12BUSM1228City Campus2362
Finance and Regulation for Entrepreneurs12YesBUSM1313City Campus2364
Ethics and Governance12BUSM3115City Campus2366
Family Business and Entrepreneurship12YesBUSM4053City Campus2373
Enterprise Information Systems12YesISYS2425City Campus1922
Occupational Health and Safety Management12BUSM3122City Campus2325
AND

Select and Complete One (1) Course from:

University Elective
 
AND

*Top of page


Year Five of Program

WORK EXPERIENCE: 

You should typically complete your Work Experience requirements before commencing your final year of studies. Further details on this are outlined in the graduation requirements above.

 

COURSES OFFERED IN BOTH SEMESTER 1 AND SEMESTER 2: 

Where class numbers are shown for both semesters, you may choose either semester that suits, aiming to have a reasonably balanced load between semesters.

GRADUATION:

To be eligible to graduate you must have accumulated a total of 528 credit points, having obtained a pass grade or approved credit transfer (exemptions) for all core courses listed in the academic plan and appropriate electives.  Ensure that all your results and any/all approved exemptions are shown on your academic transcript. 

**Note: Not all courses may be run in the semester specified below. Make sure you enrol in a balanced load each semester. Please seek advice from your Program Manager if you need advice on completing your enrolment.

{

Complete the following Two (2) Courses:

Course Title

Credit Points

Prereqs/ Coreqs

Course Code

Campus

Semester 1 Class

Semester 2 Class

Professional Research Project 124YesOENG1074Bundoora Campus1497 (FF)1486 (FF)
Professional Research Project 224YesOENG1075Bundoora Campus1498 (FF)1487 (FF)
OR

Complete the following One (1) Course:

Course Title

Credit Points

Prereqs/ Coreqs

Course Code

Campus

Semester 1 Class

Semester 2 Class

Professional Research Project (Industry)48YesOENG1076Bundoora Campus1499 (FF)1488 (FF)
}
AND

Complete the following One (1) Course:

Course Title

Credit Points

Prereqs/ Coreqs

Course Code

Campus

Semester 1 Class

Semester 2 Class

Autonomous Systems12MANU2206Bundoora Campus1637 (FF)
AND

Select and Complete Three (3) of the following Courses:

Course Title

Credit Points

Prereqs/ Coreqs

Course Code

Campus

Semester 1 Class

Semester 2 Class

Manufacturing Systems Modelling12MANU1420Bundoora Campus1638 (FF)
Automated System Design12MANU2230Bundoora Campus1679 (FF)
Advanced Robotics12YesMANU1417Bundoora Campus1494 (FF)
Computer Integrated Manufacturing12MANU1418Bundoora Campus1505 (FF)
Quality Management12YesMANU1419Bundoora Campus1680 (FF)
Advanced Materials12YesMIET1200Bundoora Campus1501 (FF)
Advanced Manufacturing and Design12MANU2455City Campus1681 (FF)
 

*Top of page



Contact details and related links

Program structure enquiries

Program Manager:  Dr. Reza Hoseinnezhad
Tel: +61 3 9925 6135
Email: rezah@rmit.edu.au

School of Engineering 

City campus
Building 57, Level 3
115 Queensberry Street
Carlton VIC 3053
Tel:+61 3 9925 8098

Bundoora East campus
Building 251, Level 3
264 Plenty Road
Bundoora VIC 3083
Tel:+61 3 9925 6022

Program Administrative Contact: engineering.landt@rmit.edu.au

Timetabling

The majority of Higher Education programs use the Student Timetabling System (STS). Go to the Student Timetabling System web page to access timetabling information.

If your program is taught by a Vocational Education (VE) school then please go to the Vocational Education timetabling website.

Material fees

Some courses and programs have material fees (fees for field trips, goods or services) associated with them. In most cases these charges are not compulsory, but are levied by the teaching school for materials they purchase on your behalf for use in your studies. Go to the Material Fees web page to check the material fees for your program and courses.

Enrolment

For more information about enrolment at RMIT University, please go to the Enrolment home page.

*Semester 1 classes generally commence in February and Semester 2 classes generally commence in July. Please contact your school for more information about specific class start days.

Policies

For more information about other RMIT University policies, please go to the Policies web site.

Student Electives

University Electives are available to Undergraduate students, and in selected Postgraduate programs.

Information about University Elective courses at RMIT is available on the University Electives web site.

*Top of page