Course Title: Draw 3D designs
Part B: Course Detail
Teaching Period: Term2 2016
Course Code: VART5911C
Course Title: Draw 3D designs
School: 350T Fashion & Textiles
Campus: Brunswick Campus
Program: C4218 - Certificate IV in Textile Design and Development
Course Contact: Peter Bonnell
Course Contact Phone: +61 3 99259171
Course Contact Email: peter.bonnell@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Nominal Hours: 60
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
None
Course Description
This unit covers skills and knowledge required to draw three dimensional designs for custom made and production textile, clothing and footwear products.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
LMTGN3008A Draw 3D designs |
|
Element: |
1 Prepare drawing tools, equipment and workstation |
|
Performance Criteria: |
|
|
Element: |
2 Interpret designer or rough sketch and apply 3D drawing techniques |
|
Performance Criteria: |
2.1 Designer or rough sketch is interpreted 2.2 Features and specifications are identified 2.3 Quality criteria for drawing is identified 2.4 Design of product is accurately drawn in pencil using templates where required and showing relevant wearing or placement angles 2.5 Front, back and profile views of the product are drawn 2.6 Penciled drawing is confirmed with customer or designer and necessary adjustments made to meet requirements |
|
Element: |
3 Finalise 3D designs |
|
Performance Criteria: |
3.1 Finalised drawing is rendered according to requirements 3.2 Presentation materials, tools and equipment are selected 3.3 Visual presentation techniques are applied to final illustration 3.4 Final illustration of 3D design is presented |
Learning Outcomes
Demonstrates knowledge of:
• parts of and terminology of the product
• drawing tools and equipment
• presentation materials, tools and equipment
• traditional and non-traditional materials quality concepts
• OHS practices including hazard identification and control measures associated with
• workplace practices
• recording and reporting practices
Demonstrates skill to:
• use drawing tools and equipment to illustrate designs
• use presentation materials, tools and equipment
• present final illustration for design
• apply quality procedures
• read, interpret and follow information on work specifications, standard operating procedures and work instructions and other reference material
• maintain accurate records
• communicate within the workplace
• sequence operations
• meet specifications
• clarify and check task-related information
• carry out work according to OHS practices
Details of Learning Activities
Please note: This course is clustered with VART5909C Present and Promote Textile Concepts
In this course you will learn about and practice using the materials, techniques and tools to present textile design concepts.
Weekly learning activities are structured to provide you with the opportunity to develop design presentation skills and knowledge to clearly communicate concepts.
Activities include:
• discussion of underpinning knowledge;
• demonstration of skills and technique;
• practical application;
This course is delivered in a simulated studio /workshop environment. Assessment tasks will be set in studio sessions and the details of all submissions will be provided with the project briefs.
During studio sessions, students will receive continuous feedback on how to improve and extend their art practice.
OHS policies and procedures must be adhered to at all times. Students must wear fully covered shoes at all times. It is strongly recommended that students wear overalls or protective clothing.
Teaching Schedule
Week |
Week starting |
Draw 3D Present and Promote |
Homework activities |
1 |
4 Jul |
Assessment Task 1 Visual Diary Drawing studies OHS - Studio Practice, Materials and equipment , research and assessment Intro to 3D Drawing techniques fashion Illustration figure, proportion, rendering styles Project 2 Dinosaurs Galore (Project Overview) |
|
2 |
11 Jul |
Children Figures/ Technical flats Skill Building |
Research design inspiration & collect Resources for Mood Boards |
3 |
18 Jul |
Figures/ Technical flats Skill Building |
|
4 |
25 Jul |
Project 2 Dinosaurs Galore Prepare design concepts |
Visual tools planned for design concept |
5 |
1 Aug |
Project 2 Dinosaurs Galore Develop design concepts and motifs for Range, hand rendering techniques, 3D dinosaurs drawing. |
In depth research and of hand rendering and drawing styles and Illustration |
6 |
8 Aug |
Motif and figure illustration development |
|
7 |
15 Aug |
Motif and figure illustration development Technical specification drawing |
|
8 |
22 Aug |
Tuesday August 23, Excursion to The Arts Centre (Stage Presence Exhibition) Project 3 Wearables (Project Overview) |
Research design inspiration & collect Resources for Wearables (Garments/accessories) |
29 Aug –4 Sept SEMESTER BREAK | |||
9 |
5 Sep |
Presentation techniques and development of storyboards, developing own Illustration style for storyboards. |
Finalising Illustrations, and design range, plan and arrangement of presentation |
10 |
12 Sep |
Project 2 Dinosaurs Galore Prepare Illustrations for Designer or rough sketch is interpreted |
Prepare for visual and verbal presentation |
11 |
19 Sep |
Dinosaurs Galore Project Final presentation to group ASSESSMENT Task 1 and PROJECT 2 Submission |
Research and collection of Illustrations and inspiration for project Wearables |
12 |
26 Sep |
Develop Mood board with collected images, samples, inspiration Drawing Styles/hand rendering techniques, Knit and Weave simulations |
Experimental Wearables constructing textile samples Wearables |
13 |
3 Oct |
Project 3 Wearables |
|
14 |
10 Oct |
Benefits and features of design using effective presentation skills. |
|
15 |
17 Oct |
Illustration 3 D Drawing Project 3 Wearables |
|
16 |
24 Oct |
Project 3 Wearables Preparation for presentation and story boards / illustrations and production sketches to be completed / Look Book / swatch books. Finalising Details! |
Final samples to be completed week 16 for presentation |
17 |
31 Oct |
Project 3 Wearables (Final Presentation to panel, and project submission) Outcomes of the presentation are documented. Reflection/Changes/Included on final presentation. |
This course is delivered to both full time students and part time Certificate IV students scheduled to attend in the evenings. Part-time students may be required to attend Saturday sessions.
Learning Resources
Prescribed Texts
References
Other Resources
General Kit
(not required for week 1 - purchase based on need after week one)
Visual diary (A3 or A4 size)
Scissors – Sharp
Steel ruler-30cm
Set Square
Felt tipped pens Black Permanent maker Artline 700
Blue Ballpoint pen
Pencils: H, HB, 2B, 4B, 6B, 8B
Eraser-basic hard rubber
Kneadable eraser
Glue stick Uhu 40gm
Cutting knife (small with 5 blades)
Brushes-round 00, 1, 3, 6,10, - flat narrow to wide, 3 sizes
A1 Folio
The Brunswick library is full of textile, fashion illustration & technical drawing and other 3-dimensional design resources!
Overview of Assessment
To achieve successful completion of this course students must demonstrate an understanding of all elements of competency.
Assessment tasks have been designed to measure achievement of each competency in a flexible manner.
Students will be awarded a grade only if competency has been demonstrated within the standard enrolment period on the first assessment attempt.
Units assessed as ’not yet competent’ on a first assessment attempt and ’competent’ on a second or subsequent attempt are to have results amended to competent but are not eligible for grading.
Students are advised that they are likely to be asked to personally demonstrate their assessment work to their teacher.
All work must be submitted by the due date. Late submission will not be graded higher than a PASS.
Assessment Tasks
There are 3 Assessment tasks.
You must complete each task to a satisfactory level to be deemed competent.
Task 1 and projects 2 & 3 are graded – Specific criteria is provided on detailed project briefs.
Task 1 Visual Diary 10% Due 20th of Sep and 1st of November
- Illustration research.
- Drawing studies.
Project 2 Dinosaurs Galore 60% Due 20th of September
- 3D Drawing
- Research and Design development
- Final designs and storyboards which include figure illustrations and design specifications
- Presentation
Project 3 Wearables 30% Due 1st of November
- 3D Drawing
- Design development and Research
- Presentation
Visual Diary
In addition to the assessments described above you will be required to maintain a visual diary for all projects through this course cluster: 3D Drawing and Present Textile Concepts.
The visual diary will be included in the assessment of projects. It should contain a variety of drawing references and annotations about process and ideas including:
• Continuous collection of inspirational images and information for artist/designer resource –
• Sketches of own ideas
• Images related to product concepts
• Notations re: discussions
• Colour palettes
• Conceptual imagery
Assessment Matrix
Other Information
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to all RMIT students.
Services offered by SLC to support numeracy and literacy skills of the students are:
- Assignment writing, thesis writing and study skills advice
- Maths and science developmental support and advice
- English language development
Please refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and Learning Support.
Disability Liaison Unit:
Students with disability or long-term medical condition should contact Disability Liaison Unit to seek advice and support to complete their studies.
Please refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.
Late submission:
Students requiring extensions for 7 calendar days or less (from the original due date) must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. The student will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
Students seeking an extension of more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Assignments submitted late without approval of an extension will not be accepted or marked.
Special consideration:
Please refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information about special consideration.
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offense that may lead to expulsion from the University.
Please refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Course Overview: Access Course Overview