Course Title: Install, configure and test an internet protocol network

Part B: Course Detail

Teaching Period: Term2 2017

Course Code: EEET7360C

Course Title: Install, configure and test an internet protocol network

School: 174T School of VE Engineering, Health & Science

Campus: City Campus

Program: C4378 - Certificate IV in Information Technology Networking

Course Contact: Anar Haque

Course Contact Phone: +61 3 9925 4755

Course Contact Email: anar.haque@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Jatinder Warraich

9925 4967

jatinder.warraich@rmit.edu.au

Nominal Hours: 50

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

Nil

Course Description

This unit describes the performance outcomes, skills and knowledge required to carry out the installation of network hardware and software, initial configuration according to organisational requirements and testing of an internet protocol (IP) network. This may be part of the upgrade of an existing network or the implementation of a new network.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

ICTTEN416 Install, configure and test an internet protocol network

Element:

1.Prepare to install IP network

Performance Criteria:

1.1 Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes and standards

1.2 Arrange site access according to required procedure

1.3 Review existing network design documentation to ensure it is current and complete

1.4 Select components and network elements required to be installed to meet the technical requirements

1.5 Contact vendors and service suppliers to obtain specifications and availability of identified components

1.6 Develop plans, with prioritised tasks and contingency arrangements, for installation of components with minimum disruption to client

1.7 Liaise with appropriate person to obtain approval for the plans, including security clearance and timing

Element:

2.Install and configure IP network

Performance Criteria:

2.1 Install and configure server hardware and software according to organisational and industry standards, following plans

2.2 Install and configure computer, other hardware and software, according to organisational and industry standards and plans

2.3 Install and configure other software required for the network to operate with security and integrity according to the plan

Element:

3.Test and reconfigure IP network

Performance Criteria:

3.1 Test installed software and hardware, utilising available technical tools, to ensure all components are functioning as expected

3.2 Test the network to ensure it is functioning according to specifications

3.3 Resolve problems identified in the modified network

Element:

4.Complete documentation and clean worksite

Performance Criteria:

4.1 Complete hardware and asset recording document in line with organisational requirements

4.2 Document installation, boot-up and configuration procedures according to organisational requirements

4.3 Tabulate test results and complete all user reports

4.4 Complete client report and notify of network status

4.5 Clean up and restore worksite to client’s satisfaction

4.6 Secure sign-off from appropriate person

Learning Outcomes


Activities in this course aim to enhance your knowledge required to carry out the installation of network hardware and software, initial configuration according to organisational requirements and testing of an internet protocol (IP) network. This may be part of the upgrade of an existing network or the implementation of a new network. The Internet will be used as a learning tool and a resource for students to seek and locate relevant information.


Details of Learning Activities

This unit describes the performance outcomes, skills and knowledge required to carry out the installation of network hardware and software, initial configuration according to organisational requirements and testing of an internet protocol (IP) network. This may be part of the upgrade of an existing network or the implementation of a new network.


Teaching Schedule

 

Week

Topic

Elements

1

Introduction to IP Addressing,

Technical Journals

Technical Journal Released (Due Week 14)

Online Quiz 1 released (Due Week 2)

1.3, 1.6, 1.7, 3.3, 4.3, 4.4

2

Components in the Network

Networking Software

Basic Router Configuration

Basic LAN Config lab

Online Quiz 2 released (Due Week 3)

Weekly Labs assessment released (Due Week 15)

1.1 - 1.3,  2.2, 2.3, 3.1 - 3.3, 4.2 - 4.6

3

Connections Between Devices,

Basic Router Configuration (Cont)

Basic Routed WAN - Practical lab

1.1 - 1.4, 1.6, 1.7,  2.2, 2.3, 3.1 - 3.3, 4.2 - 4.6

4

Subnettng

Subnetting - Class C Lab

Online Quiz 3 released (Due Week 5)

1.1 - 1.3, 1.6, 1.7,  2.2, 2.3, 3.1 - 3.3, 4.2 - 4.6

5

Subnetting

Advanced Subnetting lab

1.1 - 1.3, 1.6, 1.7,  2.2, 2.3, 3.1 - 3.3, 4.2 - 4.6

6

Selecting devices. Planning your Network

Integrated Assignment: Selecting Networking Devices Released ( Due Week 9)

Recording Assets

Wireless

Wireless Lab

1.4 - 1.7, 4.1

7

Router DHCP

DHCP - Practical lab

Online Quiz 4 released ( Due Week 8)

1.1 - 1.4, 1.6, 1.7,  2.1 - 2.3, 3.1 - 3.3, 4.2 - 4.6

8

EIGRP & OSPF

EIGRP & OSPF lab

1.1 - 1.3, 1.6, 1.7,  2.2, 2.3, 3.1 - 3.3, 4.2 - 4.6

9

EIGRP & OSPF cont.

EIGRP & OSPF - Practical Lab

Journal Review

1.1 - 1.4, 1.6, 1.7,  2.1 - 2.3, 3.1 - 3.3, 4.2 - 4.6

10

Default Route & PPP Encapsulation

Default Route & PPP Encapsulation Lab

1.1 - 1.3, 1.6, 1.7,  2.2, 2.3, 3.1 - 3.3, 4.2 - 4.6

11

VLSM

VLSM Lab

Online Quiz 5 Released (Due Week 12)

1.1 - 1.3, 1.6, 1.7,  2.2, 2.3, 3.1 - 3.3, 4.2 - 4.6

12

VLSM (Cont)

Advanced VLSM lab

1.1 - 1.3, 1.6, 1.7,  2.2, 2.3, 3.1 - 3.3, 4.2 - 4.6

13

Testing and Troubleshooting

Testing and Troubleshooting Lab

3.1 - 3.3

14

Testing and Troubleshooting cont.

Adv. Testing and Troubleshooting Lab

3.1 - 3.3

15

Integrated Assignment: Network Configuration Released ( Due Week 17)

  

16

Integrated Assignment: Network Configuration

  

17

Integrated Assignment: Network Configuration

  

18

Final Resubmissions (if available)

  


Learning Resources

Prescribed Texts


References


Other Resources


Overview of Assessment

Students must pass each of the following assessment tasks to demonstrate competent.

Assessment

Task 1

Weekly Labs

Task 2

Online Quizzes

Task 3

Integrated Assignment


These tasks assesses the following Course Learning Outcomes (CLOs):

Assessment  Mapping Matrix

Element/

Performance Criteria Covered

Task 1

Task 2

Task 3

1.1

X

 

X

1.2

X

 

X

1.3

X

X

X

1.4

 

X

X

1.5

 

 

X

1.6

X

 

X

1.7

 

 

X

2.1

X

 

X

2.2

X

 

X

2.3

X

 

X

3.1

X

 

 

3.2

X

 

X

3.3

X

X

X

4.1

 

 

X

4.2

X

 

X

4.3

X

 

X

4.4

 

 

X

4.5

X

 

X

4.6

X

 

X

 


Assessment Tasks

  1. Journal

This assessment will involve a co-assessment of two (2) courses, viz.:

ICTTEN416 – Install, Configure and Test an IP Network

ICTTEN417 – Install, Configure and Test a Router

  1. Weekly Labs

This assessment will involve a co-assessment of two (2) courses, viz.:

ICTTEN416 – Install, Configure and Test an IP Network

ICTTEN417 – Install, Configure and Test a Router

  1. Online Quizzes

This assessment will involve a co-assessment of two (2) courses, viz.:

ICTTEN416 – Install, Configure and Test an IP Network

ICTTEN417 – Install, Configure and Test a Router

  1. Integrated Assignment: Sports Precinct

This assessment will involve a co-assessment of five (5) courses, viz.:

ICTICT401 - Determine and confirm client business requirements

ICTICT418 - Contribute to copyright, ethics and privacy in an ICT environment

ICTTEN416 - Install, configure and test an internet protocol network

ICTTEN417 - Install, configure and test a router

ICTDBS403 - Create Basic Databases

 

You are permitted to have a maximum of 2 resubmissions for this course, however each individual assessment may only be resubmitted once.

All resubmissions must be completed and submitted no more than 7 days after your work has been graded.


Assessment Matrix

Students must pass each of the following assessment tasks to demonstrate competent.

 

Assessment

Task 1

Journal

Task 2

Weekly Labs

Task 3

Online Quizzes

Task 4

Integrated Assignment


These tasks assesses the following Course Learning Outcomes (CLOs):



Element/

Performance Criteria Covered

Task 1

Task 2

Task 3

Task 4

1.1

  

X

  

X

1.2

  

X

  

X

1.3

X

X

X

X

1.4

    

X

X

1.5

      

X

1.6

X

X

  

X

1.7

X

    

X

2.1

  

X

  

X

2.2

  

X

  

X

2.3

  

X

  

X

3.1

  

X

    

3.2

X

X

  

X

3.3

X

X

X

X

4.1

      

X

4.2

X

X

  

X

4.3

X

X

  

X

4.4

      

X

4.5

  

X

  

X

4.6

X

X

  

X

 

To be deemed competent you must demonstrate an understanding of all aspects required of the competency. Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks.

Other Information

Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:

  • Relevant
  • Current
  • Satisfies the learning/competency outcomes of the course

Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL

Study and learning Support:

Study and Learning Centre (SLC) provides free learning and academic development advice to you. 
Services offered by SLC to support your numeracy and literacy skills are: 

  • assignment writing, thesis writing and study skills advice 
  • maths and science developmental support and advice 
  • English language development 

Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support 

Equitable Learning Services (ELS):

If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).

Late submission: 

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager. 
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted. 
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date. 

Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked. 


Special consideration: 

Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration 

Plagiarism: 

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University. 

Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism. 

Other Information: 

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

Course Overview: Access Course Overview