Course Title: Apply building codes and standards to the construction process for medium rise building projects

Part B: Course Detail

Teaching Period: Term1 2015

Course Code: BUIL5989C

Course Title: Apply building codes and standards to the construction process for medium rise building projects

School: 130T Vocational Engineering

Campus: City Campus

Program: C5256 - Diploma of Building and Construction (Building)

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4338

Course Contact Email: vocengineering@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Robert Hinkley

robert.hinkley@rmit.edu.au
 

Nominal Hours: 200

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

Nil

Course Description

This unit of competency specifies the outcomes required to access, interpret and apply relevant building codes and standards applicable to the construction processes of medium rise commercial and wide span buildings (medium rise licensing classification with reference to Classes 1 and 10 construction, Classes 2 and 3 to a maximum of 3 storeys, and Classes 4 to 9 to a maximum of 3 storeys, not including Type A construction). To successfully construct medium rise buildings requires thorough knowledge of the purpose and content of the Building Code of Australia (BCA), coupled with the ability to interpret other codes and standards related to a specific building.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

CPCCBC5001B Apply building codes and standards to the construction process for medium rise building projects

Element:

1. Access and interpret relevant code and standard requirements.

Performance Criteria:

1.1. Relevant performance requirements from the BCA that apply to individual projects (classified as medium rise) are identified.
1.2. Requirements of relevant BCA deemed-to-satisfy (DTS) provisions are determined.
1.3. Requirements of relevant Australian standards referenced in the BCA are accessed and interpreted appropriately.

Element:

2. Classify buildings.

Performance Criteria:

2.1. Nature of building is determined according to use and arrangement.
2.2. BCA criteria to determine the defined classification are applied.

Element:

3. Analyse and apply a range of solutions to a construction problem to ensure compliance with the BCA.

Performance Criteria:

3.1. Range of criteria that will ensure that construction methods comply with BCA performance requirements is determined.
3.2. Alternative solutions to a design or construction BCA-compliance problem are discussed and proposed in accordance with company policies and procedures.
3.3. Performance-based solutions are identified and documented in accordance with BCA requirements and organisational quality procedures and processes.
3.4. Assessment methods referenced in the BCA to determine whether a building solution complies with performance requirements or DTS provision of the BCA are analysed and applied.
3.5. Relevant documentation is identified and completed in accordance with BCA requirements.

Element:

4. Apply fire protection requirements.

Performance Criteria:

4.1. Passive and active fire control elements required by the BCA and other legislation are identified.
4.2. Level of fire resistance required for the construction of various medium rise buildings is determined.
4.3. BCA requirements with respect to passive and active fire protection to medium rise buildings are identified and applied.
4.4. Check of existing buildings for compliance with passive and active fire protection requirements is carried out in accordance with BCA requirements.


Learning Outcomes


Refer to elements


Details of Learning Activities

Students will learn through a number of planned activities (face to face classes, workplace/site visits, simulated workplace learning, online learning via blackboard and other forms of structured teaching and learning). Students will be observed and assessed through their planned activities throughout the duration of the course.


Teaching Schedule

Semester 1

Week 1 - 2.
Introduction and Course overview.Classes of buildings. Class 2 to 9 buildings.
Building legislation and the BCA.
Australian Standards. Multiple classifications. Portfolio of in-class activities explained.
BCA Structure. Sections of BCA. E.g. A to J. Objectives and related Performance requirements. Deemed to Satisfy Provisions. Underpinning Knowledge.
Develop skill in BCA use. Index. Interpretation Part A1. State Variations. Assignment No 1 available week 1.

Week 3 - 5.
Fire resistance & stability. Section C. Terms & definitions. Part C3 Protection of Openings. Fire doors, shutters, windows, type and use. Service Openings. Assignment 2 due week 4.

Week 6 - 7.
Application of Section C to a Class 2 Building. Test No 1 week 7.

Week 8 - 10.
Access & Egress
Part D1 Provision for Escape. Travel distances & distance between exits. Construction of Exits. Fire Isolated and other stair types. Use table D1.13. Access for People with Disabilities.

Week 11 - 13
Services & equipment. Section E - Fire Hydrants, Fire hose reels, sprinklers, portable fire extinguishers.
Emergency Lighting, Exit Signs and Warning Systems. Smoke Hazard management

Week 14 - 16.
Health & Amenity. Section F. Damp and weatherproofing. Sanitary and other facilities. Room sizes F3. Light and Ventilation F4 Natural light, Artificial light, borrowed light. F 5 Sound transmission and insulation.
Semester 1 Portfolio submission week 16.

Week 17 - 18.
Tutorial and finalise weeks 1 - 16.

Semester 2

Week 19.
Fire Hazard Properties C1.10. Specifications C1.10. Lightweight Construction C1.8 and Specification C1.8. Incipient spread of fire.

Week 20.
Section C. Fire Resistance – Continued from weeks 3-7. Performance of an external wall in a fire. C1 - 11. Specification Clause 4.3 concession.

Week 21
Section C as noted in Session 20 continued. Test 2

Week 22.
Section G Ancillary Provisions. Part G1 minor structures and components G1.1 Swimming pools. G2 Heating Appliances, Fireplaces, Chimneys and Flues. G3 Atrium Construction. Construction in Alpine Areas

Week 23.
Section B – Structure.
.
Week 24.
Section H Special Use Buildings H1 Theatres, Stages and Public Halls and Public Transport Buildings.
Essential-Safety-Measures in existing buildings.

Week 25
Building product accreditation

Week 26 – 27
Building problem solving/plan check – Factory, Office & Warehouse. Assignment No 2 available week 26

Week 28 - 30.
Australian Standards. (Content awareness and use of selected Parts) Standards include but not limited to those covering Masonry, concrete and timber fire resistance, glass in buildings and termites.
Assignment 2 due week 29.

Week 31
Alternative solutions

Week 32 - 34.
Section J. Energy Effeciency. Section J In-class assignment. Semester 2 Portfolio submission.

Week 35 - 36. Tutorial and finalise course.


Learning Resources

Prescribed Texts

Building Code of Australia (BCA) Volume 1 of the National Construction Code (NCC)


References

Australian Standards - students to be advised in class.


Other Resources


Overview of Assessment

Assessment will incorporate a variety of methods including written,oral, practical tasks and activities. This unit of competency could be assessed by the application of design principles and solutions specified in BCA performance requirements or DTS provisions applicable to a particular building project.You will be asked to personally demonstrate to your teacher/assessor the practical skills gained during this course to the relevant industry standards. Assessment activities will occur throughout this course and feedback will be provided at regular intervals.

Assessment Tasks

Students must pass each of the following assessment tasks to demonstrate competence.

Assessment

Weight %

Assessment 1a

Portfolio of exercises – Semester 1

10

Assessment1b

Portfolio of exercises – Semester 2

10

Assessment 2

Assignment 1

10

Assessment 3

Test No. 1 - Closed book

10

Assessment 4

Test No. 2 - Open Book

25

Assessment 5

Assignment 2

25

Assessment 6

In-class individual assignment

10

These tasks assesses the following Course Learning Outcomes (CLOs):

Assessment Mapping Matrix

 

Element / Performance Criteria Covered

Assessment 1 (1a & 1b)

Assessment 2

Assessment 3

Assessment 4

Assessment 5

Assessment 6

1.1

 

 

 

X

X

X

1.2

 

 

X

X

X

 

1.3

X

 

 

 

X

 

2.1

X

X

 

 

 

 

2.2

X

X

 

 

 

 

3.1

 

 

 

X

X

 

3.2

X

 

 

 

X

 

3.3

X

 

 

 

X

 

3.4

 

 

X

 

X

X

3.5

X

 

 

 

 

X

4.1

X

 

 

X

 

 

4.2

 

 

X

X

 

 

4.3

X

 

 

X

 

 

4.4

X

 

 

X

 

 

To be deemed competent you must demonstrate an understanding of all aspects required of the competency. Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks.


Assessment Tasks

Assessment Tasks


Assessment 1 - Portfolio - students are observed doing exercises/activies in class. The completed work is kept in a folio to be submitted at the end of semesters 1 and 2. The portfolio is assessed by knowledge and skill shown by the student as the teacher observes and interacts with the student while the exercises/activities are being done in class. - 20%


Assessment 2 - Assignment 1 - Classes of Buildings. - 10%


Assessment 3 - Test No. 1 Closed book - BCA – goal of, structure and how to use . Passive fire control elements required by the BCA.- 10%


Assessment 4 - Test No.2 - Open Book (BCA Vol1 of the NCC) - Fire Resistance, Access and Egress. Health and Amenity. - 25%


Assessment 5 - Assignment No 2 - BCA Objectives Functional, Statements Performance Requirements, Deemed to Satisfy Solutions. - 25%


Assessment 6 - . Section J. In-class individual assignment- 10%


Assessment Matrix

Assessments/Performance Requirements 1.1 1.2 1.3 2.1 2.2 3.1 3.2 3.3 3.4 3.5 4.1 4.2 4.3 4.4
Assessment 1 - Portfolios X X X X X X X X X X X X X X
Assessment 2 - Assignment 1       X X                  
Assessment 3 - Test No. 1 Closed book   X              X     X    
Assessment 4 - Test No.2 - Open Book  X X       X         X X X X
Assessment 5 - Assignment No 2  X      X    X  X          
Assessment 6 - Section J. In-class individual assignment  X                X  X        

Other Information

Competency requirements and Grading:
To be deemed competent students must demonstrate an understanding of all elements of a competency. Assessment methods have been designed to measure achievement of each competency in a flexible manner over multiple tasks.
Students are advised that they are likely to be asked to personally demonstrate their assessment work to their teacher to ensure that the relevant competency standards are being met. Observation of students performing work is used to confirm competency.

Grading available are:
Grade level Competency Level
CHD Competent with High Distinction -The learner will confidently apply novel but relevant solutions to unfamiliar and complex tasks.
CDI Competent with Distinction -The learner will confidently evaluate alternative solutions to an unfamiliar task or problem and use the most appropriate solution.
CC Competent with Credit -The learner will elegantly apply appropriate facts, rules and standard solutions to achieve an unfamiliar task or problem with confidence.
CAG Competency Achieved - Graded -The learner will be able to apply facts, rules and standard solutions to achieve a predictable task or solve a problem.
NYC Not Yet Competent
-Although the learner exhibits access to a limited range of facts and rules, the learner has difficulty applying these facts and rules to a familiar task.

Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:
assignment writing, thesis writing and study skills advice
maths and science developmental support and advice
English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.

Assessment Submission:
Turnitin
Turnitin is an online text-matching service which can be used to support academic integrity and address plagiarism. All submissions via Turnitin within Blackboard include the relevant wording for the e-Submission authorisation process. Students are to use Turnitin. to verify that the work submitted is their own work and referenced accordingly. This software will be used by all staff to ensures original work by students is checked at submission of the assessment.

e-Submission
The University is obliged to obtain clear student authorisation on all assessable works. RMIT’s e-Submission process provides a valid authorisation equivalent to a signature on a paper coversheet allowing students to submit assessment works electronically.
The e-Submission process requires that specific wording and a link to the assessment declaration is included in your assessment documentation in order to comply with legal and statutory obligations, and can be used with all RMIT teaching technologies, including;
• Blackboard
• PebblePad
• WebLearn
• RMIT’s Google Apps for Education (Gmail, Drive, Sites etc.)
The use of fully electronic submissions saves significant time for both staff and students.

Good practice
• Providing clear advice to students on the e-Submission process as part of their assessment expectations assists in ensuring that it is straightforward for RMIT students to submit work electronically.
• Students can submit non-electronic works via conversion by a digital scanner, i.e. paper-based assessments can be scanned and submitted for assessment via the e-Submission process.
• Establishing a Turnitin assignment in Blackboard is a quick way to provide an e-Submission process for a class group.
Students must submit all assessment task electronically via blackboard as directed by their teacher.
Students are not to email or hand assessment tasks to teachers in class, corridor or cafeteria etc

Late submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and
lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Assignments submitted late without approval of an extension will not be accepted or marked.
Refer to RMIT University Policies and Procedures, verify for most recent version.
Special consideration:
Please Refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information about special consideration

Plagiarism:
Plagiarism may occur in oral or written presentations. Plagiarism is the presentation of another person’s work, idea or creation as one’s own; without appropriate referencing. Plagiarism is not acceptable. The use of another person’s work or ideas must be acknowledged. Failure to do so may result in charges of academic misconduct, which may result in cancellation of results and exclusion from your course.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism
Other Information:

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

Course Overview: Access Course Overview