Course Title: Work safely in the construction industry
Part B: Course Detail
Teaching Period: Term1 2015
Course Code: OHTH5548C
Course Title: Work safely in the construction industry
School: 130T Vocational Engineering
Campus: City Campus
Program: C5256 - Diploma of Building and Construction (Building)
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: email@example.com
Name and Contact Details of All Other Relevant Staff
Nominal Hours: 6
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
This unit of competency specifies the outcomes required to undertake Occupational Health and Safety (OHS) induction training within the construction industry.
It requires the ability to demonstrate personal awareness of OHS legislative requirements, and the basic principles of risk management and prevention of injury and illness in the construction industry.
Licensing requirements will apply to this unit of competency depending on the regulatory requirements of each jurisdiction.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title:
CPCCOHS1001A Work safely in the construction industry
1. Identify OHS legislative requirements.
1.1. Applicable OHS legislative requirements relevant to own work, role and responsibilities are identified and explained.
2. Identify construction hazards and control measures.
2.1. Basic principles of risk management are identified.
3. Identify OHS communication and reporting processes.
3.1. OHS communication processes, information and documentation are identified and discussed.
4. Identify OHS incident response procedures.
4.1. General procedures for responding to incidents and emergencies are identified and explained.
Refer to elements
Details of Learning Activities
Students will participate in a variety of teaching methods including: lectures, tutorials, class discussion, and group work
2. Identify OHS legislative requirements.
3. Applicable OHS legislative requirements relevant to own work, role and responsibilities are identified and explained.
4. Duty of care requirements are identified.
5. Own responsibilities to comply with safe work practices are identified and explained.
6. Identify construction hazards and control measures.
7. Basic principles of risk management are identified.
8. Common construction hazards are identified and discussed.
9. Measures for controlling hazards and risks are identified.
10. Identify OHS communication and reporting processes.
11. OHS communication processes, information and documentation are identified and discussed.
12. Role of designated OHS personnel is identified and explained.
13. Safety signs and symbols are identified and explained.
14. Procedures and relevant authorities for reporting hazards, incidents and injuries are identified.
15. Identify OHS incident response procedures.
16. General procedures for responding to incidents and emergencies are identified and explained.
17. Procedures for accessing first aid are identified.
18. Requirements for the selection and use of relevant personal protective equipment are identified and demonstrated.
19. Fire safety equipment is identified and discussed.
21. Open Book Test
* In this course, minimum student directed hours are 0 in addition to 6 scheduled teaching hours.
* Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation, and oral presentation preparation.
Overview of Assessment
Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course.
You are required to complete the following assessment task:
1. Open Book Test
This assessment task needs to be successfully completed to demonstrate competence.
Your assessment for this course will be marked using the following table:
CA Competency Achieved
NYC Not yet Competent
DNS Did not Submit
Open Book Test
Elements 1,2,3 and 4
The following information is the same for:
Competency requirements and Grading:
To be deemed competent students must demonstrate an understanding of all elements of a competency. Assessment methods have been designed to measure achievement of each competency in a flexible manner over multiple tasks.
Students are advised that they are likely to be asked to personally demonstrate their assessment work to their teacher to ensure that the relevant competency standards are being met. Observation of students performing work is used to confirm competency.
Grading available are:
CAG Competency Achieved -The learner will be able to apply facts, rules and standard solutions to achieve a predictable task or solve a problem.
DNS: Did not submit assessment
NYC Not Yet Competent -Although the learner exhibits access to a limited range of facts and rules, the learner has difficulty applying these facts and rules to a familiar task.
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:
assignment writing, thesis writing and study skills advice
maths and science developmental support and advice English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.
Turnitin is an online text-matching service which can be used to support academic integrity and address plagiarism. All submissions via Turnitin within Blackboard include the relevant wording for the e-Submission authorisation process. Students are to use Turnitin. to verify that the work submitted is their own work and referenced accordingly. This software will be used by all staff to ensure original work by students is checked at submission of the assessment.
The University is obliged to obtain clear student authorisation on all assessable works. RMIT’s e-Submission process provides a valid authorisation equivalent to a signature on a paper coversheet allowing students to submit assessment works electronically.
The e-Submission process requires that specific wording and a link to the assessment declaration is included in your assessment documentation in order to comply with legal and statutory obligations, and can be used with all RMIT teaching technologies, including;
• RMIT’s Google Apps for Education (Gmail, Drive, Sites etc.)
The use of fully electronic submissions saves significant time for both staff and students.
• Providing clear advice to students on the e-Submission process as part of their assessment expectations assists in ensuring that it is straightforward for RMIT students to submit work electronically.
• Students can submit non-electronic works via conversion by a digital scanner, i.e. paper-based assessments can be scanned and submitted for assessment via the e-Submission process.
• Establishing a Turnitin assignment in Blackboard is a quick way to provide an e-Submission process for a class group.
Students must submit all assessment tasks electronically via blackboard as directed by their teacher.
Students are not to email or hand assessment tasks to teachers in class, corridor or cafeteria etc
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and
lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Assignments submitted late without approval of an extension will not be accepted or marked.
Refer to RMIT University Policies and Procedures, verify for most recent version.
Please Refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information about special consideration
Plagiarism may occur in oral or written presentations. Plagiarism is the presentation of another person’s work, idea or creation as one’s own; without appropriate referencing. Plagiarism is not acceptable. The use of another person’s work or ideas must be acknowledged. Failure to do so may result in charges of academic misconduct, which may result in cancellation of results and exclusion from your course.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview