Course Title: Perform microscopic examination

Part B: Course Detail

Teaching Period: Term1 2015

Course Code: ONPS5656C

Course Title: Perform microscopic examination

School: 155T Vocational Health and Sciences

Campus: City Campus

Program: C5283 - Diploma of Laboratory Technology (Pathology Testing)

Course Contact: Amberlee Mitton

Course Contact Phone: +61 3 9925 8053

Course Contact Email: amber.mitton@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Gwen MacDonald     gwen.macdonald@rmit.edu.au

Nominal Hours: 40

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

there are no pre-requisites or co-requisites for this course


 

Course Description

This unit of competency covers the ability to set up a light microscope for optimum resolution, to prepare routine samples and to observe, identify and report sample characteristics. There will be 16 hours of scheduled classes in the laboratory to practise your technical skills and the remaining hours are for you to engage with the online learning materials provided and complete self assessment.

 


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

MSL973007A Perform microscopic examination

Element:

1. Interpret test requirements

Performance Criteria:

1.1 Review test request to identify samples to be tested, test method and equipment involved
1.2 Identify hazards associated with the sample, preparation methods, reagents and equipment and implement enterprise control measures
 

Element:

2. Set up work area for preparation and examination of samples

Performance Criteria:

2.1 Collect equipment and reagents and arrange the workspace so that equipment can be used safely and efficiently
2.2 Perform pre-use and safety checks to ensure equipment is fit for purpose and report faulty or unsafe equipment to appropriate personnel
2.3 Check reagents are fit for purpose and report any items that require replacement
 

Element:

3. Prepare samples for examination

Performance Criteria:

3.1 Log and label samples according to enterprise procedures to ensure traceability
3.2 Check suitability of the original and prepared sample for the examination and report unsuitable samples to appropriate personnel
3.3 Prepare and store the sample for examination following enterprise methods
 

Element:

4. Set up and use a light microscope

Performance Criteria:

4.1 Set up the light path to optimise resolution
4.2 Select the appropriate objectives and filter for the sample being examined
4.3 Ensure that the lenses are clean
4.4 Adjust settings and alignment of the light path to optimise performance
4.5 Place sample correctly on the stage
 

Element:

5. Observe, identify and report sample characteristics

Performance Criteria:

5.1 Recognise and identify significant sample characteristics
5.2 Perform required calculations accurately
5.3 Prepare and view control samples and check that results are consistent with expected values
5.4 Identify and report 'out of specification' or atypical results promptly to appropriate personnel
5.5 Record and report data in accordance with enterprise procedures
 

Element:

6. Maintain a safe work environment

Performance Criteria:

6.1 Ensure safety and minimise cross contamination through the use of personal protective clothing and safety equipment
6.2 Handle all samples and equipment in accordance with enterprise safety protocols
6.3 Clean up spills using appropriate techniques to protect personnel, work area and environment
6.4 Minimise generation of waste and environmental impacts
6.5 Collect and dispose of all wastes safely
6.6 Report hazards and incidents to designated personnel using enterprise procedures. 

Learning Outcomes



Details of Learning Activities

Laboratory classes with short talks.

Lab manual questions relevant to prac work

On line materials and quizzes.

Tutorials with teachers


Teaching Schedule

Week beginning Theory Prac

 9.2.15

 

 Introduction/OHS Introduction to the microscope
 
16.2.15 Use of microscope-wet preps
Labelling requirements
 		 Yeast & onion wet prep prac 
 
 
23.2.15 Blood
Storage of specimens
Stain theory
 		 Blood film drawings
Measuring cells 
 
2.3.15 Cell Counts, counting chambers, records,

Cell counting

Staining and mounting specimens
9.3.15
 		  Oil immersion
 
16.3.15 Individual tutorials
Question sheet		  Practical assessment completion
23.3.15 On line quiz  
24.3.15 Individual tutorials
Question sheet		  Practical assessment completion


Learning Resources

Prescribed Texts


References


Other Resources

access to library, Internet


Overview of Assessment

Assessments for this course typically consist of:
• Class activities
• Assignments
• Presentations
• Exams


Assessment Tasks

Log book records and questions- submitted week 6 and 7 (S/NYS)

On line test -  week 7   

Satisfactory performance of Microscopy skills. These may be assessed during classes and at final practical assessment

All assessment types must be passed to pass this course


Assessment Matrix

On going recording of results during prac classes (S/NYS)

On Line test week of 23.3.15 50% pass required  

Other Information

This course is graded in accordance with competency-based assessment
CA- Competency Achieved
NYC- Not Yet Competent
DNS- Did Not Submit for assessment

  • All assessment types must be passed (exams, prac, and assignments etc.). For example, if there are two tests you need to have an average of 50% to pass. You can’t make up marks from one type of assessment to another (e.g. pass the tests but fail the prac component).
  • Attendance at practical classes is compulsory. A minimum of 80% attendance is required to pass this course. If you are sick you should submit a medical certificate to 6th floor office addressed to the Program Coordinator
  • Late work that is submitted without an application for an extension will not be corrected.
  • APPLICATION FOR EXTENSION OF TIME FOR SUBMISSION OF ASSESSABLE WORK- A student may apply for an extension of up to 7 days from the original due date. They must lodge the application form (available online http://www1.rmit.edu.au/students/assessment/extension) at least 24 hours before the due date. The application is lodged with the School Admin Office on Level 6, Bdg 51, or emailed to the Coordinator (amber.mitton@rmit.edu.au).
  • Students requiring extensions longer than 7 days must apply for Special Consideration (see the ‘Help me’ link in blackboard, via myRMIT studies or http://www1.rmit.edu.au/students/specialconsideration) For missed assessments such as exams - you (& your doctor if you are sick) must fill out a special consideration form. This form must be lodged online with supporting evidence (e.g. medical certificate), prior to, or within, 48 hours of the scheduled time of examination.


 

Course Overview: Access Course Overview