Course Title: Apply knowledge and requirements of paper and printing processes
Part B: Course Detail
Teaching Period: Term2 2017
Course Code: MIET7601C
Course Title: Apply knowledge and requirements of paper and printing processes
School: 320T Architecture & Design
Campus: Brunswick Campus
Program: C5359 - Diploma of Graphic Design
Course Contact: Alistair Briggs
Course Contact Phone: +61 9925 9446
Course Contact Email: alistair.briggs@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Meredith Chesney
Nominal Hours: 80
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
None required
Course Description
In this course, you will develop then apply the knowledge and skills required to work with a wide range of materials and processes within the printing and graphic arts industry. Focusing on industry terminology & communication; substrates; digital & manual production workflows; job creation and printing & finishing processes. Through varied learning activities, you will learn how to make informed choices for achieving production ready design outcomes.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
ICPKNW316 Apply knowledge and requirements of paper and printing processes |
Element: |
1. Apply knowledge of printing industry |
Performance Criteria: |
1.1 Printing industry terminology and vocabulary are used correctly 1.2 New technology and new work processes are monitored and implemented when required 1.3 Trends within printing industry are monitored, on an ongoing basis, to inform personal work practices |
Element: |
2 Apply knowledge of government Acts and regulations |
Performance Criteria: |
2.1 Basic principles and obligations involved in copyright, work health and safety (WHS), environmental protection, access and equity, and industrial awards are applied |
Element: |
3 Apply knowledge of pre-press processes |
Performance Criteria: |
3.1 Basic principles behind pre-press functions such as image production (typesetting, scanning, graphic arts camera), image combining (manual and electronic), image output (film, plates, direct to press) and digital workflow are used in production process where applicable 3.2 Appropriate use of different types of images (line, half-tone) are investigated 3.3 Different output settings (screen rulings, angles, shapes) and how they affect final product are understood 3.4 Different types of output required for different printing processes are applied 3.5 Different output devices (film setters, plate setters, analogue proofs, digital proofs) are determined |
Element: |
4 Apply knowledge of printing processes |
Performance Criteria: |
4.1 Basic principles of printing processes (lithography, relief, flexography, gravure, pad printing, screen printing, digital and electronic printing) are used to inform production processes 4.2 Types of jobs and products for which each process is appropriate are used to inform production decisions 4.3 Capabilities and limitations of each process are used to inform production decisions |
Element: |
5 Apply knowledge of converting and finishing processes |
Performance Criteria: |
5.1 Basic characteristics of converting and finishing processes (guillotining, flat-bed and rotary cutting, collating, folding, adhesive, mechanical and thermal fastening) are used to inform production processes 5.2 Types of jobs and products for which each process is appropriate are used to inform production processes |
Element: |
6 Apply detailed knowledge of paper and printing processes |
Performance Criteria: |
6.1 Relationship of different paper sizes is identified and used to inform production processes 6.2 Different weights, callipers, bulk, density and opacity of paper and how they affect pre-press, printing and finishing operations and end uses are identified and used to inform production processes 6.3 Paper grain and how it affects pre-press, printing and finishing operations are determined and used to inform production processes 6.4 Moisture content, porosity and ink absorbency and how they affect pre-press, printing and finishing operations are identified and used to inform production processes 6.5 Gloss, smoothness and surface strength and how they affect pre-press, printing and finishing operations are identified and used to inform production processes 6.6 Permanence, durability, and acidity and alkalinity of paper and how they affect pre-press, printing and finishing operations and end uses are investigated and used to inform production processes 6.7 Bursting strength, folding endurance, tensile strength and tearing resistance and how they affect printing and finishing operations and end uses are investigated and used to inform production processes |
Element: |
7 Apply detailed knowledge of paper grades and colours |
Performance Criteria: |
7.1 Paper types and grades and end uses for each type and grade are determined and used to inform production processes 7.2 Differences between wood pulp, rag and recycled papers and appropriate end uses are identified and used to inform production processes 7.3 Colour matching processes are identified and used to inform production processes 7.4 Effect of different paper colours on printing operations is investigated and used to inform production processes |
Element: |
8 Apply detailed knowledge of paper handling and storage procedures |
Performance Criteria: |
8.1 Ideal storage conditions for different types and grades of paper are investigated and used to inform production procedures 8.2 Advantages and disadvantages of different packing and delivery systems are identified and used to inform production procedures |
Element: |
9. Apply basic knowledge of costs of production |
Performance Criteria: |
9.1 Main cost elements (fixed, capital, variable) in production are identified and applied in workplace 9.2 Information required to accurately cost jobs and means of collecting it (manual and computerised) are identified and applied in workplace 9.3 Ways of minimising use of materials without affecting quality of output are investigated and applied in workplace |
Learning Outcomes
Details of Learning Activities
Learning activities will take place in a studio and computer laboratory using industry standard tools and resources. You will complete exercises and industry style projects. You will also be required to undertake independent study.
In class activities may include:
- in class demonstrations and presentations by teacher
- class exercises
- workshops including use of industry based equipment and materials
- knowledge and practical tests
- simulated workplace activities
- design activities or projects
- independent project based work
- teacher directed group activities/projects
- online tutorials and activities
- student presentations
- group discussions
- Blog/Wiki or other online discussion and participation
- review and revision
- group projects
- peer teaching & learning
- workshopping of student projects including peer/teacher feedback
- visits to industry, seminars, events and exhibitions
- guest lectures/presentations
- analysis/critique of relevant reading material
- research
Out of class activities may include:
- independent project based work
- completion of outstanding work
- online tutorials and activities
- independent research
- studio practice
- review and revision
- analysis/critique of relevant reading material
- research
Teaching Schedule
Session Details |
Due Dates |
|
1 |
Program Introduction & Overview |
|
2 |
IMAGE BASICS Knowledge Topic: Pixel Based Images & Preparing Digital images for Print
|
|
3 |
WORKING WITH IMAGES & IMAGE CAPTURE Scanning & Introduction to Curves |
|
4 |
Project 1: Notepad (1) Creation – Layout GETTING IT RIGHT FOR PRINT – Best Practices InDesign Basics
|
|
5 |
Project 1: Notepad (2)
|
|
6 |
Project 1: Notepad (3) Notepad Production – Introduction to Digital Printing |
Project 1 Digital |
7 |
PRINT KNOWLEDGE 101 Knowledge Topic: Printing Processes Knowledge Topic: Screening Technologies |
|
8 |
Notepad Production – Introduction to Print Finishing Knowledge Topic: Print Finishing & Substrates |
|
9 |
Notepad Production – Trimming Project 2: Visual Dictionary (1) |
|
10 |
Project 2: Visual Dictionary (2) Knowledge Topic: Pattern Making |
Knowledge Test 1 |
11 |
Project 2: Visual Dictionary (3) |
|
12 |
Project 2: Visual Dictionary (4) Knowledge Topic: File Checking |
|
13 |
Project 2: Visual Dictionary (5) - Submission of Digital |
Project 2 |
14 |
Visual Dictionary – Imposition & Printing (TEAM ACTIVITY) Knowledge Topic: Imposition |
|
15 |
Visual Dictionary – Finishing (TEAM ACTIVITY) Cut & Collate |
|
16 |
Knowledge Test 2 |
Knowledge Test 2 |
17 & 18 |
Assessment Period - Students should be contactable and may be required during this period |
z
Learning Resources
Prescribed Texts
References
Title: A Guide to Graphic Print Production – 3rd edition / [Kaj Johansson, Peter Lundberg, Robert Ryberg]. Author: Johansson, K. (Kaj) Other Author(s): Lundberg, Peter. and Ryberg, Robert. Publisher: Hoboken, N.J. : Wiley, 2011. |
9780470907924 |
Title: Graphic Design : Australian style manual Author: Andrew Townley Barnum ... [et al.]. Other Author(s):Barnum, Andrew Townley. Publisher: North Ryde, N.S.W. : McGraw-Hill, 2011. |
9780071011051 |
Title: Extra : Encyclopaedia of experimental print finishing |
9783034600835 |
Title: Production for Print |
9781780670867 |
Other Resources
You are advised to look at the Learning Hub at myRMIT site for ongoing updated information. A range of learning resources and references are provided throughout the year.
You will require a personal storage device and tools as outlined in tool kit list.
RMIT will provide you with resources and tools for learning in this course through our online systems and access to specialised facilities and relevant software. You will also have access to the library resources.
Amongst the library’s electronic resources is the ability to access Lynda.com for online tutorials and lessons. You may be given these tutorials (and other resources) to supplement your classroom learning. The University Library has extensive resources for Design students.
The Library has produced a subject guide that includes quality online and print resources for your studies rmit.libguides.com/graphicartanddesign
The Library provides guides on academic referencing rmit.edu.au/library/referencing and subject specialist help via your Liaison Librarian rmit.edu.au/library/librarians/dsc
Overview of Assessment
Assessment is on-going throughout the course. Assessment tasks will require you demonstrate the application of knowledge and skills through practical projects and/or activities using best industry practices. The assessment tasks include:
Knowledge tests
Production projects incorporating design and printed outcomes
An assessment charter summarises your responsibilities as an RMIT student as well as those of your teachers.
Assessment Tasks
This course has 4 assessments, which must all be completed and submitted.
There are also exercises which provide the basis for ongoing feedback and can be considered essential building blocks for the more substantial assessment projects. You should engage in all exercises. The exercises help provide evidence of competency.
Feedback throughout the course may be written, verbal or a combination of both.
You are required to demonstrate all learning outcomes to a satisfactory standard to be deemed competent.
PLEASE TAKE SPECIAL NOTE: Assessments are NOT based solely on final submission of the project, if other requirements such as presentations; progress; milestones are specifically indicated on the Timeline (Teaching Schedule) and Assessment Project Instructions. Such additional items and their due dates will form part of the overall assessment.
Project 1
Notepad
Due week 06
Project 2
Visual Dictionary
Due week 13
Knowledge Test 1
Due week 10
Knowledge Test 2
Due week 16
At the completion of the course, grading will be offered in addition to, and after, competency based assessment.
Grades which apply to courses delivered in accordance with competency-based assessment, but which also use graded assessment:
CHD Competent with High Distinction
CDI Competent with Distinction
CC Competent with Credit
CAG Competency Achieved - Graded
NYC Not Yet Competent
DNS Did Not Submit for Assessment
Assessment Matrix
An assessment matrix demonstrating alignment of assessment tasks with the relevant Unit of Competency is available from the course contact person (stated above).
Other Information
Attendance
The major aspect of your learning experience involves studio based exercises, demonstration and production. It is strongly advised that you attend all sessions in order to engage in the required learning activities, ensuring the maximum opportunity for success.
Feedback
You will receive verbal and written feedback by teacher on your work. This feedback also includes suggestions on how you can proceed to the next stage of developing your projects.
Student Progress
Monitoring academic progress is an important enabling and proactive strategy to assist you to achieve your learning potential. Student progress policy
Submissions
When submitting work for assessment you are required to complete a declaration of authorship. This must be done for every summative assessment task. This statement acknowledges that you are aware of the plagiarism implications. For non-digital submission use the printed form provided. For digital online submission please use eSubmission process. Information regarding the eSubmission process
Special Consideration Policy, Late Submission & Extensions
All assessment tasks are required to be completed to a satisfactory level.
If you are unable to complete any piece of assessment by the due date, you will need to apply for an extension. Pick the following link for details on applying for Special consideration
Any student seeking an extension, should aim at doing so a minimum of 2 days before the deadline. Work submitted late and without an extension at any point will incur late penalties in accordance with university policy. If you require an extension you must complete an extension form with evidence supporting your application and hand this to your instructor. Further links Application for extension of time
On Time Submission and Impact of Late Submission
On time submission is an important factor in your assessment. Employability skills are embedded in all courses and these include Planning & Organising and Self-management. For this reason, late work impacts on your overall grade for each assessment task.
The following adjustments for late submission will be made: Work submitted late will be assessed for competency only. Submissions are only permitted during the period that the competency is scheduled.
Academic Integrity and Plagiarism
RMIT University has a strict policy on plagiarism and academic integrity. Please refer to the website for more information on this policy go to Academic Integrity. Academic Integrity
Course Overview: Access Course Overview