Course Title: Apply principles of mechanics to engineering problems
Part B: Course Detail
Teaching Period: Term1 2013
Course Code: MIET6335
Course Title: Apply principles of mechanics to engineering problems
School: 130T Vocational Engineering
Campus: City Campus
Program: C6069 - Advanced Diploma of Engineering Technology
Course Contact: Leon Mattatia
Course Contact Phone: +61 3 9925-4668
Course Contact Email: leon.mattatia@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Serge ELJASTE
Tel. No. +6199254661
Email: sergei.eljaste@rmit.edu.au
Leon MATTATIA
Tel. No. +61 3 99254668
Email: leon.mattatia@rmit.edu.au
Nominal Hours: 60
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
None.
Course Description
This unit of competency sets out the knowledge and skills required to apply mechanics concepts and principles to solve problems common to all engineering fields. This includes forces, moments, friction and frames.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
VBP231 Apply principles of mechanics to engineering problems |
Element: |
1. Identify mechanic principles embedded in an engineering problem |
Performance Criteria: |
1.1 OH&S and environmental requirements for a |
Element: |
2. Apply principles of mechanics in the analysis or design of an engineering solution |
Performance Criteria: |
2.1 OH&S requirements for carrying out the work |
Element: |
3. Verify, document and interpret outcomes |
Performance Criteria: |
3.1 OH&S requirements for completing the work are |
Learning Outcomes
Not applicable.
Details of Learning Activities
The learning activities in this course are designed to equip students with knowledge and skills in applying the Principles of Mechanics, specifically in the area of Engineering Statics to specific structures and/or items of machinery. The unit of competency enables the student to calculate Forces and Moments (Turning Effects) essential in determining stresses used in Engineering Design.
The course will be using a combination of lectures, reading tasks, practical work and mainly tutorials/assignments to achieve these objectives.
Readings: Students may be required to read relevant section(s) of the recommended references/class notes prior to the next class.
Tutorial work & Practical Assignments challenge the students and ensure that participants apply and deepen the theoretical knowledge covered in lectures.
Teaching Schedule
SESSION 1: INTRODUCTION TO COURSE - Discussion of Course content, References and Assessment requirements; Overview of Topic 1:. Force/Moment Systems
SESSION 2: Types of Force System - Coplanar/Non Coplanar, Concurrent/Non Concurrent; Equilibrium implications; Forces and Gravity.
SESSION 3: Force Vector Analysis - Vector Diagrams, Resultants & Equilibrants. Equilibrium of Coplanar, Concurrent Force Systems.
SESSION 4: Equilibrium of Coplanar, Concurrent Force Systems.
SESSION 5: Moments & Torque - Resultant & Equilibrant Moments - Methods: First Principles, Varignon’s Theorem. Resolution of a Force into a Force & a Moment.
SESSION 6: Characterstics and calculation of Moments of Couples; Methods: First Principles, Shorthand formula
SESSION 7; Calculation of Moments & Couples/Tutorial/REVISION
SESSION 8: REVISION/Class assessment - UNIT TEST No. 1 (Major Assignment No. 1 due)
SESSION 9: Equilibrium of Coplanar, Nonconcurrent Force Systems-Reaction Forces & Moments in Statically Determinate Structures.
SESSION 10: Equilibrium of Coplanar, Nonconcurrent Force Systems-Reaction Forces & Moments in Statically Determinate Structures.
SESSION 11: Law of "Dry Friction" - Static & Kinetic Frictional Forces on horizontal surfaces.
SESSION 12: Law of "Dry Friction" - Static & Kinetic Frictional Forces on inclined surfaces; wedges, etc.
SESSION 13: Force Analysis of Pin Jointed Frameworks - Calculation of Internal Forces (Method of Joints)
SESSION 14: Force Analysis of Pin Jointed Frameworks - Calculation of Internal Forces (Method of Joints/Method of Sections)
SESSION 15: Force Analysis of Pin Jointed Frameworks - Calculation of Internal Forces (Method of Sections)/REVISION
SESSION 16: Laboratory Practicals: (Beam reactions or Friction on an Inclined plane or Pin Jointed Frameworks)
SESSION 17: UNIT TEST No. 2(Major assignment No. 2 & Laboratory Practical Report Due)
Please note: while your teacher will cover all the materials in the schedule, the weekly teaching and assessment order is subject to change depending on class needs and the availability of resources. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non teaching hours.
Learning Resources
Prescribed Texts
References
1. KINSKY, Roger: ENGINEERING MECHANICS AND STRENGTH OF MATERIALS, McGraw-Hill 1986 |
|
2. IVANOFF, Val: ENGINEERING MECHANICS, McGraw-Hill, 1996 |
|
3. HIBBELER, Russell C: ENGINEERING MECHANICS - STATICS, 2nd Edition, Pearson, 2004 |
|
4. Class Notes & Exercises |
Other Resources
TEACHER’S CLASS NOTES & Web References
Overview of Assessment
Assessment may incorporate of a variety of methods including written / oral activities and demonstration of practical skills to the relevant industry standards. Participants are required to submit assessment activities to their teacher / assessor. Feedback will be provided throughout the course.
Evidence can be gathered through a variety of ways including:
• observation of processes and procedures;
• oral and/or written questioning on required knowledge and skills;
• testimony from supervisors, colleagues, clients and/or other appropriate persons;
• inspection of the final product or outcome;
• a portfolio of documentary evidence.
Assessment Tasks
You are required to complete the following three assessment tasks:
1. Major Assignment - 20%
2. Laboratory Practical Report - 10%
3. Unit Tests (x2) - 70% (i.e. 35% EACH)
All assessments will include relevant problems involving force & moment analysis applied to practical engineering applications. You will need to demonstrate your understanding of underlying physical principles and your ability to perform appropriate calculations.
To be deemed competent students must satisfactorily demonstrate competence in all elements listed above. Assessment methods have been designed to measure achievement of each competency in a flexible manner over multiple tasks.
Students are advised that they will be asked to demonstrate their competence in assignment, tests and the Lab report which will be used to assess their competence.
All assessments for this course must be successfully completed to achieve a CA (Competency Achieved) grade. Only if Competency is achieved will a graded result be given using the coding choices listed below:
CHD: Competent with High Distinction
CDI: Competent with Distinction
CC: Competent with Credit
CAG: Competency Achieved - Graded
NYC: Not Yet Competent
DNS: Did Not Submit for assessment
Assessment Matrix
Assessment task 1 (Major Assignment) (20%) covers Elements 1 - 3 of competency
Assessment task 2 (Practical Report) (10%) covers Elements 1 - 3 of competency
Assessment task 3 (Unit Tests 1 & 2) (70%) covers Elements 1 - 3 of competency
Other Information
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:
assignment writing, thesis writing and study skills advice
maths and science developmental support and advice
English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Students are strongly encouraged to make full use of this service.
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and
support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit
Late submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within
no more than 2 working days of the date of lodgment as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special
Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days
after the official due date.
Special Consideration
Special Consideration is a variation to an assessment which takes into account the impact of unexpected or extenuating circumstances which have affected a student’s performance in an assessment or prevented them from attempting an assessment task, including an examination.
Please Refer http://www.rmit.edu.au/browse/Current%20students/Administration/Assessment/Special%20consideration/ to find the latest information about the purpose, eligibility and process of special consideration and the online form.
If you are seeking an Extension of Submittable Work for more than 7 calendar days (from the original due date) you must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Asssessment Work (assignments, reports or project work etc.) submitted late without an approved extension will not be accepted or marked.
Other Information:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview