Course Title: Prepare basic mechanical and structural engineering drawings to AS 1100

Part B: Course Detail

Teaching Period: Term2 2013

Course Code: CIVE5655

Course Title: Prepare basic mechanical and structural engineering drawings to AS 1100

School: 130T Vocational Engineering

Campus: City Campus

Program: C6093 - Advanced Diploma of Engineering Design

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vocengineering@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Teacher: Chris Sanos
School of Engineering (TAFE)
Ph: 9925 8342

Nominal Hours: 40

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

Nil

Course Description

This unit covers the skills and knowledge required to prepare basic mechanical and structural engineering drawings to the current Australian Drawing Standard, AS 1100.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

EDX060B Prepare basic mechanical and structural engineering drawings to AS 1100

Element:

1. Interpret drawings produced using first angle and third angle orthogonal projection methods.

Performance Criteria:

1.1 Information is extracted from the drawing.
1.2 The item specified by the drawing can be described.
1.3 A simple model of the item specified by the drawing can be made.
 

Element:

2. Produce drawings of simple mechanical engineering components to AS 1100

Performance Criteria:

2.1 Top, front and side views are produced using third angle orthogonal projection.
2.2 Geometric construction methods are used as needed to create elements of a view.
2.3 Dimensions are drawn in accordance with AS 1100.
2.4 Linetypes and weights for the various elements of the drawing are in accordance with AS 1100.
2.5 Views are positioned aesthetically on the drawing sheet.
2.6 The title block and notes are completed in accordance with AS 1100.
 

Element:

3. Produce three dimensional views of simple mechanical engineering components

Performance Criteria:

3.1 Three dimensional views are produced of simple engineering components.
3.2 Dimensions are drawn on three dimensional views in accordance with AS 1100
 

Element:

4. Draw sectional views to AS 1100 of simple mechanical engineering components

Performance Criteria:

4.1 Sectional views are drawn of components incorporating correct use of conventions.
4.2 Fasteners, shafts and webs are depicted in sectional views in
4.3 The cutting plane of each sectional view is depicted in accordance with AS 1100.
4.4 Hatching is applied to the sectional views to depict specific material types.
4.5 AS 1100 is followed in respect of hidden detail in sectional views.
 

Element:

5. Use Steel Sections Handbooks in the identification of steel members and derivation of dimensions.

Performance Criteria:

5.1 The various steel members used in structural steel construction are identified.
5.2 The relevant dimensions are extracted from the appropriate Steel Section Handbook.
 

Element:

6. Extract appropriate data from basic design information to draw, label and dimension structural steel connections

Performance Criteria:

6.1 Relevant information is extracted from relevant standards.
6.2 Drawings are prepared of required connections using appropriate symbols, terminology, linework and lettering
6.3 Drawings are labelled and dimensioned.
 

Element:

7. Detail simple beams and columns

Performance Criteria:

7.1 Design drawing is interpreted and relevant dimensions determined.
7.2 Detail drawings of simple members are completed to AS 1100.501.
7.3 Relevant information for bolted type joints, such as bolt gauge and pitch distances can be determined.
7.4 Use of appropriate weld symbols can be used in the preparation
of joint details.
 


Learning Outcomes


Refer to the Learning Package on the Learning Hub.


Details of Learning Activities

Students will use the Planning and Time Management chart in the learning material to assist them through the course. The chart lists all your topics and their learning outcomes, and the activities and assessments to complete. Following this chart is the best way to monitor your progress and ensure you meet all deadlines.

This course runs for an 8 week duration (approximately 4 hours per week) consisting of both; in-class time and out of hours study. Students are expected to complete the project assessment either during scheduled class time or in their own time.

Students will submit their assessment projects and activities as indicated in the Learning Guide and feedback on activities and assessments will be provided during and after submission.

All work must be presented as specified by your teacher and as per the instructions in the learning guide. Students are required to be professional in both presentation and attitude, including meeting of deadlines. Plagiarism is strictly forbidden. Students must ensure they have read the plagiarism statement in the Course Outlines online.

A schedule of assessments can be found below and in the learning guides.
 


Teaching Schedule

 WEEK LEARNING SCHEDULE                                                                                        ASSESSEMENT                                                                                          
1

• Intro into AS1100, Steel Sections- shape and parts, Hatching and Welding symbols, Using steel catalogues to find steel sections and sizes, Analyse catalogues, How to draw steel sections

- Class Exercise- Searching Onesteel and Manufacturers tables to find steel sections

• Assessment 1:  Draw Steel Sections                               
2 • Orthographic projection, Diff between 1st and 3rd angle, Sectional views, X-Referencing

- Class Exercise- Steel Flange
• Assessment 2: Draw Sleeve Bracket
3 • Orthographic v isometric projection

- Class Exercise- Isometric projection
• Assessment 3: Draw Brass Block
4  • Further discussion and worked examples of orthographic views  
5  • Further discussion and worked examples of orthographic views • Assessment 4: Draw Safety Bracket
6 • Sectional views and Orthographic projection • Assessment 5: Draw Manifold Assembly
7 • Discuss steel column/ beam connections

View animated examples of column/beam construction on blackboard and internet
• Assessment 6: Draw Steel beam and Column Connection
8 • Resubmissions, Create a drawing set, Assignment hand in’s and feedback to individual students  


Learning Resources

Prescribed Texts


References

1. Gladfelter, Donnie AutoCAD 2012 and AutoCAD LT 2012: No Experience Required
2. Onstott, Scott AutoCAD 2012 and AutoCAD LT Essentials
3. AS1100.101- 1992 Australian Standard Technical Drawing
4. Australian Standard AS 1100.501 Technical drawing – Structural Engineering
5. Civil Engineering Drawings PU257 OTS/TAFE frontiers
6. Boundy, AW 2002. Engineering Drawing, 6th edn., McGraw-Hill Australia Pty Ltd, Roseville NSW
7. OneSteel Structural sections handbook or CD
 


Other Resources


Overview of Assessment

Assessment are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.

Your assessment for this course will be marked using the following table:

NYC (<50%) Not Yet Competent

CAG (50-59%) Competent - Pass

CC (60-69%) Competent - Credit

CDI (70-79%) Competent - Distinction

CHD (80-100%) Competent - High Distinction


Assessment Tasks

• Assessment 1: Steel Sections (20%)
Students must use product catalogues to draw steel sections while adhering to AS1100 and class specified drawing standards

• Assessment 2: Sleeve Bracket (10%)
Students must draw the Sleeve Bracket using orthographic projection while adhering to AS1100 and class specified drawing standards

• Assessment 3: Brass Block (20%)
Students must draw the Brass Block using orthographic and isometric projection while adhering to AS1100 and class specified drawing standards

• Assessment 4: Safety Bracket (10%)
Students must draw the Safety Bracket using orthographic projection and sections while adhering to AS1100 and class specified drawing standards

• Assessment 5: Manifold Assembly (20%)
Students must draw the Manifold Assembly using orthographic projection and sections while adhering to AS1100 and class specified drawing standards

• Assessment 6: Steel Beam and Column Connection (20%)
Students must draw the Steel Beam and Column Connection using orthographic projection and sections while adhering to AS1100 and class specified drawing standards
 


Assessment Matrix

ASSESSMENT                                                                          OUTCOMES 
Assessment 1: Steel Sections  4,5
Assessment 2: Sleeve Bracket  1,2
Assessment 3: Brass Block  1,2,3,4
Assessment 4: Safety Bracket  1,2,4
Assessment 5: Manifold Assembly  1,2,4
Assessment 6: Steel Beam and Column Connection  1,2,3,4,6,7

Other Information

Study and Learning Support:

The Study and Learning Centre (SLC) provides free learning and academic development advice to all RMIT students.
Services offered by SLC to support numeracy and literacy skills are:

* Assignment writing, thesis writing and study skills advice
* Maths and science developmental support and advice
* English language development

Please refer http://www.rmit.edu.au/studyandlearningcentre to find more information

Disability Liaison Unit:

If you have a disability or long-term medical condition you should contact the DLU to seek advice and support.

Please Refer http://www.rmit.edu.au/disability to find more information about their services

Late submission:

If you require an extension for 7 calendar days or less (from the original due date) you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. The student will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.

If you require an extension of more than 7 calendar days (from the original due date) you must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.

Assignments submitted late without approval of an extension will not be accepted nor marked.

Special consideration:

Please Refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information

Plagiarism:

Plagiarism is a form of cheating and it is a very serious academic offence that may lead to expulsion from the University.

Please Refer: www.rmit.edu.au/academicintegrity to find more information.

Other Information:

All email communications will be sent to your RMIT email address and it is recommended that you check it regularly.
 

Course Overview: Access Course Overview