Course Title: Prepare cost estimates
Part B: Course Detail
Teaching Period: Term1 2016
Course Code: CIVE5673
Course Title: Prepare cost estimates
School: 130T Vocational Engineering
Campus: City Campus
Program: C6093 - Advanced Diploma of Engineering Design
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: engineering-tafe@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Program Manager
Dr. A R M Muniruzzaman
Program Manager
Ph: +61 3 9925 4468
Email: vocengineering@rmit.edu.au
Teacher
Mr W.R. (Bill) Harding
Ph: +613 9925 4443
Email: bill.harding@rmit.edu.au
Appointment by email
Nominal Hours: 20
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
EDX010B Communicate and apply standard industry procedures and policies in an engineering design office
EDX130B Use technical mathematics (basic)
Course Description
This unit of competency deals with the skills and knowledge required to apply the fundamental principles and concepts associated with planning, estimating and costing to the preparation and interpretation of tender documents for small, simple projects that would not require Project Management expertise.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
EDX030B Prepare cost estimates |
Element: |
1. Plan for estimating and quoting. |
Performance Criteria: |
1.1 Availability of all necessary and appropriate plans, drawings and text is established to allow the completion of the work. |
Element: |
2. Prepare cost estimates for a project from relevant data. |
Performance Criteria: |
2.1 All necessary and appropriate plans, drawings and texts are selected and interpreted to identify the correct size, type and quantity of material and equipment required to complete the project. 2.2 All estimated materials and equipment are accurately and concisely recorded on schedules. 2.3 All necessary and appropriate plans, drawings and texts are selected and interpreted to carry out labour estimation. 2.4 Labour hours required for the project are estimated in accordance with enterprise resources and policies. 2.5 All additional plant and/or machinery and skills needed but lacking within the enterprise are estimated as part of the project estimation. 2.6 Estimated material equipment and labour costs are accurately totalled for the project. 2.7 Total material, equipment and labour costs are accurately and concisely recorded on schedules. 2.8 Overhead costs are estimated in accordance with standard procedure and accurately and concisely recorded on schedules. 2.9 The tender/quote price for the project is calculated and checked according to enterprise policy. 2.10 Calculations are accurately and concisely recorded on a price summary sheet. |
Learning Outcomes
.
Details of Learning Activities
You will be involved in the following learning activities to meet requirements for this course and stage 1 competencies for Engineering Associates
• Lectures/Tutorials
• Workshops/Discussions
• Projects/Research Work/Team Work
• Self-Directed Learning
• Site Visit/Excursion/Guest Speaker (TBA)
Teaching Schedule
Week | Topics Delivered | Element/Performance Criteria |
1 | Introduction to course, course guide, assessment, topics breakdown, resources, OHS issues. | 1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10 |
2 | Tendering- Summary | 1.1, 1.2, 1.3, 1.4, 1.5 |
3 | Types of Estimates-Summary, Methods of Estimating-Summary | 1.1, 1.2, 1.3, 1.4, 1.5 |
4 | Quiz (10 marks) | 1.1, 1.2, 1.3, 1.4, 1.5 |
5 | Sources of Estimating Data -Summary | 1.1, 1.2, 1.3, 1.4, 1.5 |
6 | Explain Project general requirements | 1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10 |
7 | Explain Project details | 1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10 |
8 | Project calculations - quantities | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10 |
9 | Project material costs | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10 |
10 | Project equipment/labour costs | 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10 |
11 | Workshop - finalise project | 1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10 |
12 | Project to Hand in (40 marks) | 1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10 |
13 | Detailed Estimates of Cost | 1.1, 1.2, 1.3, 1.4, 1.5 |
14 | Types of Estimates - Additional Details | 1.1, 1.2, 1.3, 1.4, 1.5 |
15 | Methods of Estimates - Additional Details | 1.1, 1.2, 1.3, 1.4, 1.5 |
16 | Types of Contracts/Site Inspection | 1.1, 1.2, 1.3, 1.4, 1.5 |
17-18 | Written Test (50 marks) | 1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10 |
Learning Resources
Prescribed Texts
References
Other Resources
Students will be able to access information and learning materials through myRMIT and may be provided with additional materials in class. List of relevant reference books, resources in the library and accessible Internet sites will be provided where possible. During the course, you will be directed to websites to enhance your knowledge and understanding of difficult concepts.
Overview of Assessment
Assessment are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.
Your assessment for this course will be marked using the following table:
NYC (<50%) Not Yet Competent
CAG (50-59%) Competent - Pass
CC (60-69%) Competent - Credit
CDI (70-79%) Competent - Distinction
CHD (80-100%) Competent - High Distinction
Assessment Tasks
Assessment 1: Quiz
Weighting towards final grade (%): 10%
Assessment 2: Project
Weighting towards final grade (%):40%
Assessment 3: Written Test
Weighting towards final grade (%): 50%
Questions about specific assessments and marks obtained by students may not be entertained if later than 1 week after results are communicated
Assessment Matrix
Assessment vs EDX030B Elements & Performance Criteria
Assessment vs EDX030B Elements & Performance Criteria | |||||||||||||||
Assessments/Criteria | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 2.7 | 2.8 | 2.9 | 2.10 |
Quiz | X | X | X | X | X | ||||||||||
Project | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X |
Written Test | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X |
Other Information
• Student directed hours involve completing activities such as reading online resources, project work, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is 20 hours outside the class time.
Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
• Relevant
• Current
• Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
Study and Learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:
- Assignment writing, thesis writing and study skills advice
- Maths and science developmental support and advice
- English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit
Late Submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special Consideration:
Please refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Email Communication:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview