Course Title: Provide solutions to problems in basic industrial control systems

Part B: Course Detail

Teaching Period: Term2 2012

Course Code: EEET6796C

Course Title: Provide solutions to problems in basic industrial control systems

School: 130T Vocational Engineering

Campus: City Campus

Program: C6112 - Advanced Diploma of Engineering Technology - Electrical

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: engineering-tafe@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Marko Dumovic

marko.dumovic@rmit.edu.au

Nominal Hours: 60

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

None

Course Description

This unit covers solving problems in basic industrial control systems. The unit encompasses safe working practices, interpreting process and circuit diagrams, applying knowledge of industry controls to problem solving techniques, safety and functional testing and completing the necessary  documentation .


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

UEENEEI020B Provide solutions to problems in basic industrial control systems

Element:

1. Prepare to provide solutions to basic .

Performance Criteria:

1 1.1 OHS processes and procedures for a given work area are identified, obtained and understood
1.2 Established OHS risk control measures and procedures are followed in preparation for the work.
1.3 The extent of basic industrial control system problems are determined from performance specifications and situation reports and in consultations with relevant persons.
1.4 Activities are planned to meet scheduled timelines in consultation with others involved in the work.
1.5 Tools, equipment and testing devices needed for the work are obtained in accordance with established procedures and checked for correct operation and
safety.

Element:

2. Industrial control system problems .

Performance Criteria:

2.1 OHS risk control measures and procedures for carrying out the work are followed.
2.2 Knowledge of basic industrial control system device and circuit operation, characteristics and applications are applied to developing solutions to
control problems.
2.3 Parameters, specifications and performance requirements in relation to each basic industrial control system problems are obtained in accordance with established procedures.
2.4 Approaches to resolving basic industrial control system problems are evaluated to provide most effective solutions.
2.5 Methods for dealing with unexpected situations are selected on the basis of safety and specified work

2.6 Problems are solved efficiently without waste of materials or damage to apparatus and the surrounding environment or services and using sustainable energy practicesoutcomes.

Element:

3. Provide solutions to basic industrial control system problems Test and document solutions to basic industrial control system problems .

Performance Criteria:

3 3.1 OHS risk control measures and procedures for carrying out the work are followed.
3.2 Solutions to basic industrial control system problems are tested to determine their effectiveness and modified where necessary.
3.3 Adopted solutions are documented including instruction for their implementation that incorporates risk control measure to be followed.

3.4 Justification for solutions used to solve basic industrial control system problems are documented in accordance with established procedures.


Learning Outcomes



Details of Learning Activities

Theoretical and simulated work activities designed to develop knowledge and skills to provide solutions to problems in closed loop control systems which includes:
Classroom learning activities involving the following topics:
o Process control systems
o OH&S principles related to computer programming
o Open and closed loop control systems
o Electrical diagrams and control circuits
o Digital controllers
o Feedback control
o Controller types & control modes: feedback, feedforward, cascade and ratio
o Standard control signals and Analogue/digital control conversion
o Wireless signal transmition

Practical laboratory exercises on:
o Proportional Integral and Differential (PID) Controllers
o PID control actions, set point change, process demand change
o Algorithm and characteristics of Proportional, Integral and Derivative components of a controller,
o Controllers configuration and tuning methods


Work simulated assignment on:
o Effects of PID control gain parameters on system response
o Effects of increasing and decreasing controller gain (in systems using P,PI, and PID); with and without Integral (in systems using PI and PID), increasing and decreasing Integral (in systems using PI and PID);with and without derivative (in systems using PID); and increasing and decreasing derivative (in systems using PID).
• Research assignment, requiring approximately 20% of course hours for independent study and research on PID controller
applications.

• Student directed hours involve completing activities such as assignments, project and assignment work, writing laboratory reports and reading online resources.
 


Teaching Schedule

 

Week Number  and Topic Delivered                                                                                                                                                                Assessment Tasks
 

1 Process control systems                                                              UEENEEI020B 1.1;1.2;1.5
2 Analogue Inputs and outputs, Electrical Diagrams and Control Circuits - UEENEEI020B 1.1;1.2;1.5 
3 Analogue Control, Open and closed loop control systems -UEENEEI020B 1.1;1.3;1.4
4 Digital controllers, Standard system signals                        -UEENEEI020B 1.1;1.3;1.1.4;1.5                                            Analogue Assignment 10%
5 Process Variables,                                                                       UEENEEI020B 1.1;1.2;1.5 1.5
6 Process Characteristics, Feedback Control                            -UEENEEI020B 2.1;2.2;2.3;2.4;2.5;2.6
7 Process Control Modes ,                                                            -UEENEEI020B 2.1;2.2;2.4;;2.6                                             Assessment task 2 ( Assignment issued) 25%
8 Prpoprtional controllers                                                               -UEENEEI020B 2.1;2.2;2.3;2.4;                                             Accumulative Lab assessment 2%
9 Integral controllers ,                                                                      -UEENEEI020B 2.1;2.2;2.3;2.4;2.5;2.6
10 PID simulation softwares -UEENEEI020B 1.1;2.2;1.3;2.4;2.5;2.6   Accumulaive Practical Exercise Assessment 3%
11 PID controllers                                                                            -UEENEEI020B 2.1;2.2;2.3;2.4;2.5;2.6                                         
12 PID tunning methods                                                                 -UEENEEI020B 2.1;2.2;2.3;2.4;2.5;2.6                              Accumulaive Practical Exercise Assessment 5%
14 Feedforward, Cascade and ratio control                               -UEENEEI020B 3.1;3.2;3.3;2.4;2.5                                     Accumulaive Practical Exercise Assessment 5%
15 Solutions to industrial control systems                                 -UEENEEI020B 3.1;3.2;3.3;2.4;2.5                                     Test  50%
16Test and document solutions to basic industrial control system problems -UEENEEI020B 3.1;3.2;3.3;2.                                       
17 Industrial control systems                                                         -UEENEEI020B 3.1;3.2;3.3;2.4;2.5                                       
18 Assessment feedback                                                               -UEENEEI020B 3.1;3.2;3.3;2.4;2.5                                      PID Assignment submission 
 


Learning Resources

Prescribed Texts

Marko Dumovic, Process Control Systems, RMIT


References

 Curtis D. Johnson, Process Control Instrumentation Technology, Prentice Hall


Other Resources

RMIT online learning resources are located on RMIT Online Learning Hub.
Follow the link to log in http://www.rmit.edu.au
The Learning Hub ( Blackboard) is the central point of access to the online courses in which students are registered.

Recommended Videos and DVDs available in RMIT Carlton Library:
- Understanding Electrical Diagrams and Control Circuits
- Instrumentation Discrete and Sensory
- Electrical Switching Timing and Control Devices
- Digital controllers ( 30’)
- Process Variables ( 30’)
- Process Characteristics ( 30’)
- Feedback Control ( 30’)
- Process Control Modes (30’)

Resources to assist student learning and assessment are be placed on School’s internal network , S and X drives. Student will need student’s login number and password to access this information.
 


Overview of Assessment

This course will be assessed through a range of practical exercises, assignments and progressive tests.


Assessment Tasks

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set
in the National Training Package. The students are required to undertake summative assessments that bring together knowledge
and skills.
 

Assessment task 1 (Practical exercises) 15%
Cumulative assessment of practical laboratory exercises and demonstrations on Proportional Integral and Differential (PID) Controllers, control parameters, controller tunning and nalaogue digital interfacing to controller.
A range of work simulated exercises and demonstrations is design for student to:
A. Demonstrate an understanding the extent of the basic industrial control system problem
B. Obtain electronic device and circuit parameters, specifications and performance requirements appropriate to each problem.
C. Test solutions to basic industrial control system problems
D. Document justification of solutions implemented in accordance established procedures

Assessment Task 2  (Analogue Assignment) 10% 
 

 

Assessment task 3 ( PID Assignment) 25%
Work simulated assignment o effects of PID control gain parameters, system response, effects of increasing and decreasing controller proportional , integral and differential constants.

Assessment task 4 ( Test) 50%
Written assessment  on open and closed loop systems, PID control actions, Algorithm and characteristics of Proportional, Integral and Derivative components of a controller, controllers configuration and tuning methods and conversion of anlogue to digital control sygnams. 


Student has also to show an understanding of Occupational Health and Safety to an extent indicated by the following aspects:
• basic legal requirements covering occupational health and safety in the workplace
• the requirements for personal safety in the workplace
• identifying potential workplace hazards and suggested measures for accident prevention
• working safely with electrical tools or equipment
• emergency procedures for the rescue of an electric shock victim equipment
• emergency first aid for an electric shock victim
 

This course is graded using the following course grades-

CHD- Competent with High Distinction
CDI- Competent with Distinction
CC- Competent with Credit
CAG- Competency Achieved - Graded
NYC- Not Yet Competent
DNS- Did Not Submit for Assessment 

Students should be informed with  the special consideration policy available at -

http://www.rmit.edu.au/browse;ID=qkssnx1c5r0y


 


Assessment Matrix

 

 

Competency National Code Competency Title Practical Assignment Project/
Presentation
Test
 
UEENEEG020B Provide solutions to problems in basic industrial control systems                                                                                  Elements 1,2        Element 3      Elements 2 &3

 

 
 

Other Information

A license to practise in the workplace is required for work involving direct access to plant and equipment connected to installation wiring at voltages above 50 V a.c. or 120 V d.c.

* In this course, minimum student directed hours are 12 in addition to 48 scheduled teaching hours.
* Student directed hours involve completing activities such as reading online resources, assignments, report for practical work, and  individual student-teacher course-related consultation.  

Study and learning Support:

Study and Learning Centre (SLC) provides free learning and academic development advice to all RMIT students.
Services offered by SLC to support numeracy and literacy skills of the students are:

assignment writing, thesis writing and study skills advice
maths and science developmental support and advice
English language development

Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support

Disability Liaison Unit:

Students with disability or long-term medical condition should contact Disability Liaison Unit to seek advice and support to
complete their studies.

Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit

Late submission:

Students requiring extensions for 7 calendar days or less (from the original due date) must complete and lodge an Application
for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. The student will be notified within
no more than 2 working days of the date of lodgment as to whether the extension has been granted.

Students seeking an extension of more than 7 calendar days (from the original due date) must lodge an Application for Special
Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days
after the official due date.

Assignments submitted late without approval of an extension will not be accepted or marked.


Special consideration:

Please Refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information about special consideration

Plagiarism:

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.

Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.


Email Communication:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.


 

Course Overview: Access Course Overview