Course Title: Solve problems in d.c. circuits
Part B: Course Detail
Teaching Period: Term2 2015
Course Code: EEET7020C
Course Title: Solve problems in d.c. circuits
School: 130T Vocational Engineering
Campus: City Campus
Program: C6120 - Advanced Diploma of Engineering Technology - Electrical
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: vehs@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Noor Sateh
Ph: +613 99254013
Fax: +613 99254377
Email: noor.sateh@rmit.edu.au
Amandeep Kaur
Ph: +613 99254444
Fax: +613 99254377
Email: amandeep.kaur@rmit.edu.au
Kemps Cheng
Ph: +61 3 9925 4691
Fax: +61 3 9925 4377
Email: kemps.cheng@rmit.edu.au
Nominal Hours: 80
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
UEENEEE101A
Course Description
This unit covers determining correct operation of single source d.c. series, parallel and series-parallel circuits and providing solutions as they apply to various electrotechnology work functions. It encompasses working safely, problem solving procedures, including the use of voltage, current and resistance measuring devices, providing solutions derived from measurements and calculations to predictable problems in single and multiple path circuits.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
UEENEEE104A Solve problems in d.c. circuits |
Element: |
1. Prepare to work on d.c. electrical circuits. |
Element: |
2. Solve d.c. circuit problems. |
Element: |
3. Complete work and document problem solving activities. |
Learning Outcomes
Refer to Elements
Details of Learning Activities
Learning Activities
You will involve in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates.
- Lecture
- Tutorial
- Practicals
Engineers Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:
EA 1. Knowledge and Skill Base
EA1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.
EA 2. Engineering Application Ability
EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.
EA 3. Professional and Personal Attributes
EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.
Engineers Australia Stage 1 Competencies are mapped with competency UEENEEE104A in the Assessment Matrix.
Classroom tutorial activities to consolidate the theory of concepts
Practical activities applied, with problem solving and related questions to develop skills in safe testing.
Projects may be undertaken as part of a team or individual basis.
Participate in individual and team problem solving scenarios/role plays/ case studies and participate in supervised workshop practice in simulated workplace environment dealing with a range of practical exercises related to:
1. Series Circuits
2. Parallel Circuits
3. Series /Parallel circuits
4. Effects of meters in a circuits
5. Resistance measurement
6. Capacitor and Capacitance
7. Capacitors in series and parallel
The skills and knowledge described in this unit may require a license to practice in the workplace where plant and equipment are directly connected to installation wiring that operates at voltage above 50 V a.c. or 120 V d.c.
Teaching Schedule
The proposed teaching schedule for this competency is detailed below:
Week | Topic Delivered | Elements/Performance criteria |
1 |
Basic electrical concepts Basic electrical circuit Tutorial # 1 |
1.1-1.2, 2.1-2.2 |
2 |
Ohm’s Law Electrical power Tutorial # 2
Lab #1 (2.5%) |
1.1-1.2, |
3 |
Effects of electrical current EMF sources energy sources and conversion electrical energy Tutorial # 3 Lab #2 (2.5%) |
1.1-1.6 |
4 |
Resistors Series circuits Tutorial 4 |
1.1-1.6 |
5 |
Parallel circuits Series/parallel circuits |
1.1-1.6 2.1-2.6| 3.1-3.4 |
6 |
Factors affecting resistance Effects of meters in a circuit Lab # 6 (2.5%) |
1.1-1.6 |
7 |
Resistance measurement Capacitance Lab # 8 (2.5%) |
1.1-1.6 |
8 |
Capacitors Capacitors in Series and Parallel Revision |
1.1-1.6 2.1-2.6| 3.1-3.4 |
9 |
Revision Written Test |
|
10 | Preparation for project (DC circuits part) | 3.3, 3.4 |
11 | Preparation for project (DC circuits part) | 3.3, 3.4 |
12 | Preparation for project (DC circuits part) | 3.3, 3.4 |
13 | Preparation for project (DC circuits part) | 3.3, 3.4 |
14 | Preparation for project (DC circuits part) | 3.3, 3.4 |
15 | Preparation for project (DC circuits part) | 3.3, 3.4 |
16 | Submission for project | |
17-18 | Exam period |
Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is minimum 42 hours outside the class time.
Learning Resources
Prescribed Texts
Introductory Circuit Analysis |
0-13-173044-4 |
References
Other Resources
Overview of Assessment
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:
Assessment 1: Practical/Laboratories
Weighting towards final grade (%): 20
Assessment 2: Assignment
Weighting towards final grade (%): 10
Assessment 3: Practical Test
Weighting towards final grade (%): 20
Assessment 4: Final Written Test
Weighting towards final grade (%): 50
These tasks assesses the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Element/Performance Criteria Covered |
Assignment |
Lab |
Practical Test |
Final Written Test |
1.1 |
x |
x |
x |
x |
1.2 |
x |
x |
x |
x |
1.3 |
x |
x |
x |
x |
1.4 |
x |
x |
x |
x |
1.5 |
x |
x |
x |
x |
1.6 |
x |
x |
x |
x |
2.1 |
x |
x |
x |
x |
2.2 |
x |
x |
x |
x |
2.3 |
x |
x |
x |
x |
2.4 |
x |
x |
x |
x |
2.5 |
x |
x |
x |
x |
2.6 |
x |
x |
x |
x |
3.1 |
x |
x |
x |
x |
3.2 |
x |
x |
x |
x |
3.3 |
x |
x |
x |
x |
3.4 |
x |
x |
x |
x |
Assessment Tasks
1. Laboratory exercises (20%)
Each student will complete 8 practical exercises designed to reinforce the theory topics taught during the semester.
Most practical exercises consist of two major parts:
Part A is a prior task includes only calculations (usually pre requisite for part B) and part B include measurements and graphs.
The results obtained in part B will be reviewed and compared with the calculations from section A.
These will be assessed progressively according to individual task criteria and each student is required to complete all the parts/tasks for each laboratory exercise.
All laboratory exercises must be undertaken according to safe working practice and performed according to specified laboratory standards and practice including calibration, measurement and accurate reading. This must include electrical measurement taken with safe working practice, meters properly calibrated, meter settings positioned for an accurate reading and accurate readings taken for all measurements.
2. Project (10%)
A project has to be undertaken toward the end of the unit, in a controlled environment for the specified duration in order to perform tasks autonomously.
The project circuits can be constructed using either hard ware or MultiSim (design / test) simulation computer package. Each student will complete all parts of the project individually and will be asked by the supervisor to demonstrate that the circuit is functioning according to specifications. Each student is required to complete a written report includes three major parts: calculations, circuit diagrams / measurement and results / conclusion.
3. Written Tests (Test 1 + Final Test) (20% + 50%)
Theoretical concept covered in weeks 1 to 8 will be assessed by a written Test in week 9.
This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:
80 - 100: CHD - Competent with High Distinction
70 - 79: CDI - Competent with Distinction
60 - 69: CC - Competent with Credit
50 - 59: CAG - Competency Achieved - Graded
0 - 49: NYC - Not Yet Competent
DNS - Did Not Submit for Assessment.
Assessment Matrix
Assessment vs UEENEEE104A Elements & Performance Criteria
UEENEEE104A Elements & Performance Criteria | ||||||||||||||||
Assessments | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 3.1 | 3.2 | 3.3 | 3.4 |
Laboratory exercises | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X |
Project | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X |
Written Tests | X | X | X | X | X | X |
Assessment vs Engineers Australia Stage 1 Competencies
Engineers Australia Stage 1 Competencies | ||||||||||||||||
Assessments | EA1.1 | EA1.2 | EA1.3 | EA1.4 | EA1.5 | EA1.6 | EA2.1 | EA2.2 | EA2.3 | EA2.4 | EA3.1 | EA3.2 | EA3.3 | EA3.4 | EA3.5 | EA3.6 |
Laboratoy exercises | X | X | X | X | X | X | X | X | X | |||||||
Project | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | |
Written Tests | X | X | X | X | X | X | X | X | X | |||||||
ALL ASSESSMENTS UEENEEE104A | 2 | 3 | 2 | 1 | 2 | 2 | 1 | 2 | 1 | 1 | 0 | 2 | 1 | 1 | 1 | 1 |
0 (Blank) | Graduate attribute is not assessed. | |||||||||||||||
1 | Graduate attribute is assessed in at least one, but less than one-third, of the Element. | |||||||||||||||
2 | Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element. | |||||||||||||||
3 | Graduate attribute is assessed in more than two-thirds of the Element. |
Other Information
Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
- Relevant
- Current
- Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
Study and Learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:
- Assignment writing, thesis writing and study skills advice
- Maths and science developmental support and advice
- English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.
Late Submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special Consideration:
Please refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: http://www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Email Communication:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview