Course Title: Design and implement network systems for internetworking
Part B: Course Detail
Teaching Period: Term1 2014
Course Code: COSC6150C
Course Title: Design and implement network systems for internetworking
School: 130T Vocational Engineering
Campus: City Campus
Program: C6121 - Advanced Diploma of Computer Systems Engineering
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: vocengineering@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Divya Anshu Bhardwaj
Phone: +61 3 9925 4163
Email: divya.bhardwaj@rmit.edu.au
Nominal Hours: 120
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
UEENEEE101A
Course Description
This competency standard unit covers the design, implementation and performance monitoring of internetworking systems. It encompasses safe working practice, evaluating customer requirements, applying sound design principles, using Wide Area Network (WAN) technologies, complying with regulation and standards, and documentation of design and performance monitoring.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
UEENEED118A Design and implement network systems for internetworking |
Element: |
1 Prepare to design internetworking systems. |
Performance Criteria: |
1.1 OHS processes and procedures for a given work area are obtained and understood. |
Element: |
2 Design internetworking systems. |
Performance Criteria: |
2.1 Internetworking system is designed to comply with design brief and consideration of economical and appropriately effective design solutions. |
Element: |
3 Implement internetworking systems. |
Performance Criteria: |
3.1 Activities are planned to meet scheduled timelines in consultation with others involved on the work. |
Learning Outcomes
Refer to Elements
Details of Learning Activities
You will involve in the following learning activities to meet requirements for the three clustered competencies (UEENEED118A, UEENEEH188A and UEENEED145A.) and stage 1 competencies for Engineering Associates.
• Lectures
• Practicals
• Work simulated activities
• Test and online quiz
• Preparation for the Work place
Cluster Information:
This course is delivered in a cluster (Networking 3 &4) in conjunction with UEENEEH188A (EEET7043C) and UEENEED145A (EEET7065C). You must enrol in all three courses delivered in this cluster. All the learning and assessment activities will include the components of all competencies UEENEED118A, UEENEEH188A and UEENEED145A.
Elements and Performance Criteria for UEENEEH188A (EEET7043C)
1. Prepare to design and develop electronics/computer systems projects
1.1 OHS processes and procedures for a given work area are identified, obtained and understood.
1.2 Established OHS risk control measures and procedures are followed in preparation for the work.
1.3 The extent of the proposed project development is determined from the design brief or in consultations
with appropriate person(s).
1.4 Project work is planned to meet scheduled timelines in consultation with others involved on the work
site.
1.5 Resources required for the work are selected based on compatibility with project requirements and
budget constraints.
1.6 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety
2. Design and develop electronics/computer systems projects
2.1 OHS risk control work measures and procedures are followed.
2.2 Knowledge of devices and systems and compliance standards are applied to the design
2.3 Alternative arrangements for the design are considered based on the requirements outlined in the design brief.
2.4 Safety, functional and budget considerations are incorporated in the design.
2.5 Prototype hardware and/or software systems are constructed and tested for compliance with the design brief and regulatory requirements.
2.6 Prototype malfunctions are rectified and retested to ensure effective operation of design.
2.7 Project design is documented for submission to appropriate person(s) for approval.
2.8 Solutions to unplanned situation are provided consistent with organisation policy
3. Obtain approval for the design
3.1 The design is presented and explained to client representative and/or other relevant person(s).
3.2 Requests for modifications to the design are negotiated with relevant person(s) within the constraints of organisation policy.
3.3 Final design is documented and approval obtained from appropriate person(s).
3.4 Quality of work is monitored against personal performance agreement and/or established organizational or professional standards.
Elements and Performance Criteria for UEENEED145A (EEET7065C)
1. Prepare to modify-redesign of electronics and communications system(s)
1.1 OHS procedures for a given work area are obtained and understood.
1.2 Established OHS risk control measures and procedures in preparation for the work are followed.
1.3 Safety hazards that have not previously been identified are noted and established risk control measures are implemented.
1.4 Appropriate personnel are consulted to ensure the work is co-ordinated effectively with others involved on the work site.
1.5 System operating parameters are identified by reviewing system specifications and component technical data.
1.6 The limitations, use and operation of the system to be modified is established from original specifications, manufacturers’ data and the like
1.7 The extent of modification is determined from measurements, tests, inspections, system limitations and other relevant requirements
1.8 Specifications and instructions for the modifications are documented in accordance with requirements and organisational procedures
1.9 Tools, equipment, applications, and devices needed for the work are obtained in accordance with established procedures and checked for correct operation and safety.
1.10 Preparatory work is checked to ensure no unnecessary damage has occurred and complies with requirements
2. Generate modification-redesign of electronics and communications system(s)
2.1 OHS risk control measures and procedures for carrying out the work are followed.
2.2 Alternative modification arrangements are considered and discussed with appropriate personnel
2.3 Safety, functionality and economic considerations are incorporated in the proposed modification design.
2.4 Proposed modification complies with all requirements and includes specifications and documentation for alteration of the system(s).
2.5 Changes in the use and operation of the system(s) as a consequence of the proposed modification are included in the documentation.
2.6 Decisions for dealing with unexpected situations are made from discussions with appropriate persons and job specifications and requirements.
2.7 Methods for dealing with unexpected situations are selected on the basis of safety and specified work outcomes.
2.8 Modification-redesign is carried out efficiently without unnecessary waste of materials or damage to apparatus, the surrounding environment or services and using sustainable energy principles.
3. Completion and report modification-redesign activities.
3.1 OHS risk control work completion measures and procedures are followed.
3.2 Proposed modification is checked under established procedures for compliance with all relevant requirements
3.3 Work site is cleaned and made safe in accordance with established procedures.
3.4 Proposed modification is submitted for appropriate organisational approval and, where applicable, statutory or regulatory approval
3.5 Approved copies of the modification-redesign documents are issued, and copies retained, documented and stored in records in accordance with established procedures and requirements
Engineers Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:
EA1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA1.4. Discernment of engineering developments within the practice area.
EA1.5. Knowledge of contextual factors impacting the practice area.
EA1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.
EA2.1. Application of established technical and practical methods to the solution of well defined engineering problems.
EA2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA2.4. Application of systematic project management processes.
EA3.1. Ethical conduct and professional accountability
EA3.2. Effective oral and written communication in professional and lay domains.
EA3.3. Creative, innovative and pro-active demeanour.
EA3.4. Professional use and management of information.
EA3.5. Orderly management of self, and professional conduct.
EA3.6. Effective team membership and team leadership.
Engineers Australia Stage1 Competencies are mapped with competencies UEENEED118A, UEENEEH188A, UEENEED145A in the Assessment Matrix.
Teaching Schedule
The proposed teaching schedule for the 3 clustered competencies (UEENEED118A, UEENEEH188A and UEENEED145A) is detailed below:
| Week | Topics Delivered | Elements/Performance criteria |
| 1 | Introduction to Course Outline and Assessment Criteria. Lecture: LAN design CCNA 3 (Chapter 1) Switching, routing and WAN technologies First Lab: Review of Concepts from CCNA 2 (Lab1.3.1) Windows 7 Versions, new and enhanced features of Windows 7, user interface, hardware requirements and system support Lab: Activities 1-1, 1-2, 1-3 |
UEENEED118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 2 | Lecture: Basic Switch Concepts & Configuration. CCNA 3 (Chapter 2) Internetworking system design Third Lab: Managing Switch Operating System and Configuration Files (Lab 2.5.2) Fourth Lab: Basic VLAN Configuration (Lab 3.5.1) Quiz: Weekly online quiz on chapter |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 3 | Lecture: VLANs CCNA 3 (Chapter3) Alterations to the internetworking system design Fifth Lab: Basic VTP Configuration (Lab 4.4.1) Sixth Lab: Catchup Session Quiz: Weekly online quiz on chapter 2 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 4 | Lecture: VTP CCNA 3 (Chapter4) Knowledge of devices and systems and compliance standards are applied Seventh Lab: Basic Spanning Tree Protocol (Lab5.5.1) Eighth Lab: Inter VLAN Routing (Lab 6.4.1) Quiz: Weekly online quiz on chapter 3 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 5 | Lecture: Basic STP and Redundant Layer 2 Topologies CCNA 3 (Chapter5) Alternative arrangements for the design are considered Ninth Lab: Basic Wireless Configuration (Lab7.5.1) Tenth Lab: Introduction to Assignment 2a Quiz: Weekly online quiz on chapter 4 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 6 | Lecture: Inter VLAN Routing CCNA 3 (Chapter6) Eleventh Lab: Assignment 2a Twelfth Lab: Assignment 2a Quiz: Weekly online quiz on chapter 5 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 7 | Lecture: Basic Wireless Concepts and Configuration CCNA 3 (Chapter7) Thirteenth Lab : Catchup/Revision for Open Book Practical Test and Assignment 2a Fourteenth Lab : Catchup/Revision for Open Book Practical Test and Assignment 2a Quiz: Weekly online quiz on chapter 6 and 7 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 8 | Lecture: Closed Book Test (for those who are not doing online CCNA exams) Fifteenth and Sixteenth Lab: Open Book Practical Test Quiz: Weekly online quiz on Practice Test and online Final |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 9 | Lecture: Introduction to WANs CCNA 4 (Chapter 1) Seventeenth Lab: Challenge Review (Lab1.4.1), Submission of Assignment 2a Eighteenth Lab: Basic PPP Configuration (Lab 2.5.1) Quiz: Weekly online quiz Catch-up Session |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 10 | Lecture: Configuring PPP. CCNA 4 (Chapter 2) Installing, configuring and testing switching, routing and WAN technologies Nineteenth Lab: Basic Frame Relay Configuration (Lab 3.5.1) Twentieth lab: Basic Security Configuration (Lab4.6.1) Quiz: Weekly online quiz on chapter 1 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 11 | Lecture: Frame Relay CCNA 4 (Chapter 3) Installing, configuring and testing switching, routing and WAN technologies Twenty First Lab: Basic Access Control Lists (Lab 5.5.1) Twenty Second Lab: Catch Up Session Quiz: Weekly line quiz on chapter 2 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 12 | Lecture: Introduction to Network Security CCNA 4 (Chapter 4) Installing, configuring and testing switching, routing and WAN technologies Twenty Third Lab: Basic DHCP and NAT (Lab 7.4.1) Twenty Fourth Lab: Introduction to Assignment 2b Quiz: Weekly online quiz on chapter 3 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 13 | Lecture: Using ACL’s to secure Networks CCNA 4 (Chapter 5) Lab: Assignment 2b Quiz: Weekly online quiz on chapter 4 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 14 | Lecture: Teleworker Services CCNA 4 (Chapter 6) Internetworking system design and implementation Lab: Assignment 2b Quiz: Weekly online quiz on chapter 5 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 15 | Lecture: IP Addressing Services Continued CCNA 4 (Chapter 7) and Network Troubleshooting CCNA 4 (Chapter 8) Internetworking system design and implementation Lab: Revision for Open Book Practical Test Quiz: Weekly online quiz on chapter 6 and 7 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 16 | Lecture: Revision Lab: Open Book Lab Test and Submission of Assignment 2b Quiz: Weekly online quiz on chapter 8 |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,2.1,2.2,3.1,3.5 |
| 17-18 | Lecture: Closed Book Test (for those who are not doing online CCNA exams) Quiz: Online Final Test |
UEENEED 118A 1.1,1.2,1.3,1.4,2.1,2.2,2.3,2.4, 2.5,2.6,2.7, 3.1,3.2,3.3,3.4,3.5,3.6,3.7 UEENEEH188A 1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,3.4 UEENEED 145A1.1,1.2,1.3,1.4,1.5,1.6,1.7,1.8,1.9.1.10 ,2.1,2.2,2.3,2.4,2.5,2.6,,3.1,3.2,3.3,3.4,3.5 |
Learning Resources
Prescribed Texts
References
https://www.netacad.com/ |
Other Resources
Resource materials will be available on S:\Cisco Academy\COSC6150C
Overview of Assessment
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:
Assessment 1: Assignment
Weighting towards final grade (%): 10
Assessment 2: Written Final Test
Weighting towards final grade (%): 40
Assessment 3: Practical Test with Journal
Weighting towards final grade (%): 50
These tasks assesses the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
| Elements/Performance Criteria | Assignment | Practical Test with Journal | Written Final Test |
| 1.1 | x | x | |
| 1.2 | x | x | |
| 1.3 | x | x | |
| 1.4 | x | x | |
| 1.5 | x | x | |
| 1.6 | x | x | |
| 2.1 | x | x | x |
| 2.2 | x | x | |
| 2.3 | x | x | |
| 2.4 | x | x | |
| 2.5 | x | x | |
| 2.6 | x | x | |
| 2.7 | x | x | |
| 3.1 | x | x | |
| 3.2 | x | x | |
| 3.3 | x | x | |
| 3.4 | x | x | |
| 3.5 | x | x | |
| 3.6 | x | x | |
| 3.7 | x | x |
Assessment Tasks
• Assignment, 20%
• Practical Test, 50 %
• Online and online Final Test, 30 %
This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:
80 - 100: CHD - Competent with High Distinction
70 - 79: CDI - Competent with Distinction
60 - 69: CC - Competent with Credit
50 - 59: CAG - Competency Achieved - Graded
0 - 49: NYC - Not Yet Competent
DNS - Did Not Submit for Assessment.
Assessment Matrix
Assessment vs UEENEED118A Elements & Performance Criteria
|
UEENEED118A Elements & Performance Criteria |
|||||||||||||||||||||
| Assessments | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 2.7 | 2.8 | 3.1 | 3.2 | 3.3 | 3.4 | 3.5 | 3.6 | 3.7 |
| Assignment | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | |||
| Practical Test | x | x | x | x | x | x | x | x | x | x | x | x | |||||||||
| Online Final Test | x | x | x | x | x | x | x | x | x | x | x | x | x |
Assessment vs UEENEEH188A Elements & Performance Criteria
| UEENEEH188A Elements & Performance Criteria | ||||||||||||||||||
| Assessments | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 2.7 | 2.8 | 3.1 | 3.2 | 3.3 | 3.4 |
| Assignment | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | ||
| Practical Test | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | ||
| Online Final Test | x | x | x | x | x |
Assessment vs UEENEED145A Elements & Performance Criteria
| UEENEED145A Elements & Performance Criteria | |||||||||||||||||||||||
| 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 1.7 | 1.8 | 1.9 | 1.10 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 2.7 | 2.8 | 3.1 | 3.2 | 3.3 | 3.4 | 3.5 | |
| Assignments | x | x | x | x | x | x | x | x | x | x | x | x | x | x | |||||||||
| Practical Test | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | |
| Online Final Test | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
Assessment vs Engineers Australia Stage 1 Competencies
| Engineers Australia Stage 1 Competencies | |||||||||||||||||
| Assessments | EA1.1 | EA1.2 | EA1.3 | EA1.4 | EA1.5 | EA1.6 | EA2.1 | EA2.2 | EA2.3 | EA2.4 | EA3.1 | EA3.2 | EA3.3 | EA3.3 | EA3.4 | EA3.5 | EA3.6 |
| Assignment | X | X | X | X | X | X | X | X | X | X | |||||||
| Practical Test | X | X | X | X | X | X | X | X | X | X | X | X | X | ||||
| Online Final Test | X | X | X | X | X | X | X | X | X | X | |||||||
|
ALL ASSESSMENTS UEENEED118A |
3 | 3 | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
|
ALL ASSESSMENTS UEENEEH188A |
3 | 3 | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
|
ALL ASSESSMENTS UEENEED145A |
3 | 3 | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| 0 (Blank) | Graduate attribute is not assessed | ||||||||||||||||
| 1 | Graduate attribute is assessed in at least one, but less than one-third, of the Element | ||||||||||||||||
| 2 | Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element | ||||||||||||||||
| 3 | Graduate attribute is assessed in more than two-thirds of the Element |
Other Information
• Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is 10 hours outside the class time.
Study and Learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:
- Assignment writing, thesis writing and study skills advice
- Maths and science developmental support and advice
- English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit
Late Submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special Consideration:
Please refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Email Communication:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview