Course Title: Troubleshoot digital sub-systems

Part B: Course Detail

Teaching Period: Term2 2015

Course Code: EEET7047C

Course Title: Troubleshoot digital sub-systems

School: 130T Vocational Engineering

Campus: City Campus

Program: C6122 - Advanced Diploma of Electronics and Communications Engineering

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vocengineering@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Gita Pendharkar

Phone: +613 9925 4701
Email: gita.pendharkar@rmit.edu.a

Amandeep Kaur

Phone: +613 9925 4444

Email: amandeep.kaur@rmit.edu.a
 

Nominal Hours: 80

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

UEENEEE101A, UEENEEH102A

Course Description

This unit covers determining correct operation of digital sub-systems. It encompasses working safely, problem solving procedures, including the use of voltage, current and resistance measuring devices, providing solutions derived from measurements and calculations to predictable problems in digital components circuits.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

UEENEEH112A Troubleshoot digital sub-systems

Element:

1. Prepare to troubleshoot digital sub-systems.

Performance Criteria:

1.1 OHS procedures for a given work area are obtained and understood.
1.2 OHS risk control work preparation measures and procedures are followed.
1.3 The nature of the fault is obtained from documentation or from work supervisor to establish the scope of work to be undertaken.
1.4 Advice is sought from the work supervisor to ensure the work is co-ordinated effectively with others.
1.5 Sources of materials that may be required for the work are established in accordance with established procedures.
1.6 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety.

Element:

2. Troubleshoot digital sub-systems.

Performance Criteria:

2.1 OHS risk control work measures and procedures are followed.
2.2 The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures.
2.3 Circuits are checked as being isolated where necessary in strict accordance OHS requirements and procedures.
2.4 Fault finding is approached methodically drawing on knowledge of digital components using measured and calculated values of parameters.
2.5 Unexpected situations are dealt with safely and with the approval of an authorised person.
2.6 Fault finding activities are carried out efficiently without unnecessary waste of materials or damage to apparatus and the surrounding environment or services and using sustainable energy practices.

Element:

3. Complete work and document troubleshooting activities.

Performance Criteria:

3.1 OHS work completion risk control measures and procedures are followed.
3.2 Work site is cleaned and made safe in accordance with established procedures.
3.3 Justification for solutions used to troubleshooting problems is documented.
3.4 Work completion is documented and an appropriate person or persons notified in accordance with established procedures.


Learning Outcomes


Refer to Elements


Details of Learning Activities

You will involve in the following learning activities to meet requirement for this competency and stage 1 competencies for Engineering Associates.

  • Lectures
  • Tutoirals
  • Practicals
  • Projects

 The student must demonstrate an understanding of all elements of a particular competency to be deemed competent. Assessment methods have been designed to measure achievement of each competency in a flexible manner over a range of assessment tasks.
The learning activities will include lectures, class room tutorials, practical exercises and work simulated project/s.

Engineers Australia Mapping Information:

This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:
EA 1. Knowledge and Skill Base

EA1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.

EA 2. Engineering Application Ability

EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.
EA 3. Professional and Personal Attributes

EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.


Engineers Australia Stage 1 Competencies are mapped with cluster of competency UEENEEH112A in the Assessment Matrix.


Teaching Schedule

Week Topics Delivered Elements / Performance Criteria
1 Introduction to course, course guide, assessment, topics
breakdown, resources, OHS issues etc
 
UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3
 
2 Number systems
 
 UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3
 
3 Logic gates, timing diagrams and interfacing between
different logic families Lab
UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3
 
4 Logic gates, timing diagrams and interfacing between
different logic families
 
UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3
 
5  Boolean Algebra and Logic simplification Lab
 
UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3
 
6  Boolean Algebra and logic simplification
 

UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3
 
7   Logic simplification using K-maps Lab   UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2, 3.3
 
8  Combinational logic analysis 
 
UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 3.1, 3.2,
3.3, 3.4
9  Combinational logic design  UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5,
2.6, 3.1, 3.2, 3.3, 3.4
 
10  Common combinational logic circuits: Decoders,
encoders, code converters
  UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5,
2.6, 3.1, 3.2, 3.3, 3.4
 
11  Multiplexers, demultiplexers etc
 
 UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5,
2.6, 3.1, 3.2, 3.3, 3.4
 
12  Counters and shift registers, Seven Segment Display
 
 UEENEEH112A: 1.1, 1,2, 1.3, 1.4,1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5,2.6, 3.1, 3.2, 3.3, 3.4

 
13   Student project
 

UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 2.1, 2.2, 2.3, 2.4, 2.5,2.6, 3.1, 3.2, 3.3, 3.4

 
14   Student project
 
 
UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 2.1, 2.2, 2.3, 2.4, 2.5,2.6, 3.1, 3.2, 3.3, 3.4

 
15   Student project
 
 
UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 2.1, 2.2, 2.3, 2.4, 2.5,2.6, 3.1, 3.2, 3.3, 3.4

 
16   Student project
 
 UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 2.1, 2.2, 2.3, 2.4, 2.5,2.6, 3.1, 3.2, 3.3, 3.4
 
17&18   Assessment feedback, catch-up test, laboratory
work catch-up. Test 40%
 
 UEENEEH112A: 1.1, 1,2, 1.3, 1.4, 2.1, 2.2, 2.3, 2.4, 2.5,
2.6, 3.1, 3.2, 3.3, 3.4
 

 Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is minimum 8 hours outside the class time.


Learning Resources

Prescribed Texts


References

Digital fundamentals by Thomas L. Floyd


Other Resources

Resources will be available on the local drive and blackboard


Overview of Assessment

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:

Assessment 1: Practical Test 1
Weighting towards final grade (%): 15
AND
Practical Test 2
Weighting towards final grade (%): 15

Assessment 2: Project
Weighting towards final grade (%): 30

Assessment 3: Theory Assessment - Test
Weighting towards final grade (%): 40

These tasks assesses the following Course Learning Outcomes (CLOs):

Assessment Mapping Matrix

Element/Performance Criteria Covered Laboratories, Practical Tests 1 and 2 Project Test
1.1 x x  
1.2 X X  
1.3 X X  
1.4 X X  
1.5 X X  
1.6 X X  
2.1 X X X
2.2 X X X
2.2 X X X
2.3 X X X
2.4 X X X
2.5 X X X
2.6 X X X
3.1 X X X
3.2 X X X
3.3 X X X
3.4 X X X

 

 

  


Assessment Tasks

Overview of Assessment
Assessments are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.
 

You are required to complete the following three assessment tasks:

 

 Laboratories : 15% (Week 3-10)

Practical Test : 15% (Week 11-12)

Project: 30% (Week 13-16)
A Digital project: - Students will be required to construct and test a project based on the topics mentioned in he teaching schedule and will be required to produce a project report. The project will commence on week 12 and students need to demonstrate the working project and submit the reports by week 16. The project details will be provided on the learning hub and student’s local drive.

Test : 40% (Week 17-18)
A closed book test will be held on week either 17 or 18 based on all the learning aspects of these competencies.
 

All assessment tasks need to be successfully completed to demonstrate competence.

This course is graded using the following course grades-
CHD- Competent with High Distinction
CDI- Competent with Distinction
CC- Competent with Credit
CAG- Competency Achieved - Graded
NYC- Not Yet Competent
DNS- Did Not Submit for Assessment. (This grade is only to be used where the student’s attendance in the course has been ‘confirmed’ (but they have not participated in any form of assessment and did not withdraw by the census date.)

Make sure you understand the special consideration policy available at -

http://www.rmit.edu.au/browse;ID=qkssnx1c5r0y


Assessment Matrix

 

Assessment vs Elements & Performance Criteria Mapping for UEENEEH112A

 Assessment              UEENEEH112A Elements & Performance Criteria         
  1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 2.4  2.5  2.6  3.1  3.2  3.3  3.4 
 Labs & Practical test  X X X X X X  X
 Project  X X X X X X
 Test              X  X  X  X  X  X
 All Assessments  X X X X X X  X  X  X  X  X

 

 

Assessment vs Engineers Australia Stage 1 Competencies

Assessments EA1.1 EA1.2 EA1.3 EA1.4 EA1.5 EA1.6 EA2.1 EA2.2 EA2.3 EA2.4 EA3.1 EA3.2 EA3.13 EA3.4 EA3.5 EA3.6
Projects X X X X X X X X X X X X X X X X
Labs and Practical test X X X X X X          X
Test  X X X X X            
ALL ASSESSMENTS 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2
0 Graduate attribute is not assessed.
1 Graduate attribute is assessed in at least one, but less than one-third, of the Element
2 Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element
3 Graduate attribute is assessed in more than two-thirds of the Element

Other Information

  Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
• Relevant
• Current
• Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
 

Study and learning Support:

Study and Learning Centre (SLC) provides free learning and academic development advice to all RMIT students.
Services offered by SLC to support numeracy and literacy skills of the students are:
- Assignment writing, thesis writing and study skills advice
- Maths and science developmental support and advice
- English language development

Please refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and Learning Support.

Disability Liaison Unit:

Students with disability or long-term medical condition should contact Disability Liaison Unit to seek advice and support to complete their studies.
Please refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.

Late submission:

Students requiring extensions for 7 calendar days or less (from the original due date) must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. The student will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.

Students seeking an extension of more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.

Assignments submitted late without approval of an extension will not be accepted or marked.


Special consideration:

Please refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information about special consideration.

Plagiarism:

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.

Please refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.

Email Communication:

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
 

Course Overview: Access Course Overview