Course Title: Conduct design and set out survey
Part B: Course Detail
Teaching Period: Term1 2015
Course Code: GEOM5129C
Course Title: Conduct design and set out survey
School: 130T Vocational Engineering
Campus: City Campus
Program: C6129 - Advanced Diploma of Surveying
Course Contact: Program manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: vocengineering@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Surveying Senior Educator: Thierry Demathieu
School of Engineering (TAFE)
Ph: 9925 8359
Email: thierry.demathieu@rmit.edu.au
Teacher: Toby Manning
School of Engineering (TAFE)
Ph: 9925 8359
Email: toby.manning@rmit.edu.au
Nominal Hours: 60
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
Nil
Course Description
This unit of competency specifies the outcomes required for design and set out of roads and associated engineering structures. It requires the ability to undertake all aspects of survey design from understanding client and registered surveyor requirements and the special characteristics of a given site, to applying relevant legal and statutory requirements to the design. The selection of appropriate equipment, procedures and personnel is essential to performing the task safely and efficiently. Functions will entail complying with and developing or amending organisational guidelines.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
CPPSIS6028A Conduct design and set out survey |
Element: |
1 Organise resources. |
Performance Criteria: |
1.1 Characteristics of the operating environment and any special equipment or resource requirements are identified according to organisational guidelines. |
Element: |
2 Develop the project plan. |
Performance Criteria: |
2.1 Objectives, principal work activities and constraints are defined and documented according to written survey specifications and client requirements. |
Element: |
3 Conduct the design. |
Performance Criteria: |
3.1 Design is interpreted to identify surveying data components to be measured or set out. |
Element: |
4 Conduct set out survey. |
Performance Criteria: |
4.1 Identified survey components are measured or set out. |
Element: |
5 Complete project to clients’ requirements. |
Performance Criteria: |
5.1 Completed work is checked against clients’ requirements according to the specifications. |
Learning Outcomes
Refer to Elements
Details of Learning Activities
You will learn to:
- Organise resources
- Develop the project plan
- Conduct the design
- Conduct set out survey
- Complete project to clients’ requirements
The total number of scheduled hours of teaching, learning and assessment involved in this course includes all planned activities (face to face classes, lectures, workshops and seminars; workplace visits, online learning and other forms of structured teaching and learning). It also covers the amount of effort necessary to undertake, evaluate and complete all assessment requirements, observation of work performance, discussions with supervisors and others providing third party evidence and one on one and group assessment sessions with students.
Teaching Schedule
Yarra Bend annexe modelling from point cloudYarra Bend annexe modelling from point cloud
1 - 10/2/2015 | Introduction to the topic | 1,2,3,4 & 5 | |
2 - 17/2/2015 | Yarra Bend annexe modelling from PDF | 1,2,3,4 | |
3 - 24/2/2015 | Yarra Bend annexe modelling from point cloud | ||
4 - 03/03/2015 | Yarra Bend annexe exterior survey processing | 1,2,3,4 | |
5 - 10/03/2015 | Yarra Bend annexe exterior survey processing | 1,2,3,4 | |
6 - 17/03/2015 | Yarra Bend annexe internal survey processing | 1,2,3,4 | |
7 - 24/03/2015 | Yarra Bend annexe internal survey processing | 1,2,3,4 | |
8 - 31/03/2015 | Design new teaching space & set out information | 3,5 | Assessment 1 due |
07/04/2015 | Break | ||
9 - 14/04/2015 | Façade survey processing | 1,2,3,4 | |
10 - 21/04/2015 | Street survey processing | 1,2,3,4 | |
11 - 28/04/2015 | Street survey processing | 1,2,3,4,5 | |
12 - 5/05/2015 | Assessment 2 | 1,2,3,4,5 | Assessment 2 due |
13 - 12/05/2015 | Building 70 processing | 1,2,3,4 | |
14 - 19/05/2015 | Building 70 processing | 1,2,3,4 & 5 | |
15 - 26/05/2015 | Assessment 3 | 1,2,3,4 & 5 | |
16 - 2/6/2015 | Assessment 3 | Assessment 3 due and Assessment 4 due |
Learning Resources
Prescribed Texts
References
Other Resources
Check the Library Subject Guides:
http://rmit.libguides.com/geospatial
http://rmit.libguides.com/surveyingandspatial
Overview of Assessment
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:
Assessment Tasks
Students must pass each of the following assessment tasks to demonstrate competence.
Assessment |
Weight % |
|
Assessment 1 |
Assignment |
25 |
Assessment 2 |
Assignment |
25 |
Assessment 3 |
Assignment |
25 |
Assessment 4 |
Portfolio |
25 |
These tasks assess the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Element / Performance Criteria Covered |
Assessment 1 |
Assessment 2 |
Assessment 3 |
Assessment 4 |
1.1 |
X |
|
|
X |
1.2 |
|
X |
X |
|
1.3 |
X |
|
|
X |
2.1 |
X |
|
|
X |
2.2 |
X |
|
|
X |
2.3 |
X |
|
|
X |
2.4 |
X |
X |
X |
|
3.1 |
|
X |
X |
|
3.2 |
X |
X |
X |
X |
3.3 |
|
X |
X |
|
3.4 |
|
X |
X |
|
3.5 |
|
X |
X |
|
4.1 |
X |
X |
X |
|
4.2 |
|
X |
X |
X |
4.3 |
X |
|
|
X |
4.4 |
|
X |
X |
|
5.1 |
X |
|
|
X |
5.2 |
X |
X |
X |
X |
5.3 |
X |
|
|
X |
5.4 |
X |
X |
X |
X |
To be deemed competent you must demonstrate an understanding of all aspects required of the competency. Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks.
Assessment Tasks
Students must pass each of the following assessment tasks to demonstrate competent.
Assessment Task 1 – Assignment due 31st March 2015 weight 25%
Assessment Task 2 – Assignment due 5th May 2015 weight 25%
Assessment Task 3 – Assignment due 2nd June 2014 weight 25%
Assessment Task 4 – Portfolio due on 2nd June 2014 weight 25%
All assessment tasks need to be succesfully completed to demonstrate competence.
Courses delivered in accordance with competency-based assessment, but which also utilise graded assessment.
CHD (80-100%): Competent with High Distinction
CDI (70-79%): Competent with Distinction
CC (60-69%): Competent with Credit
CAG (50-59%): Competency Achieved – Graded
NYC (<50%): Not Yet Competent
DNS: Did Not Submit an assessment
Assessment Matrix
1,2,3,4 & 5 | Assignment - | 25% | 31 March 2015 5 PM |
1,2,3,4 & 5 | Assignment - | 25% | 5 May 2015 5PM |
1,2,3,4 & 5 | Assignment - | 25% | 2 June 2015 5PM |
1,2,3,4 & 5 | Portfolio | 25% | 2 June 2015 5PM |
Other Information
Underpinning Skills and Knowledge
• exercise precision and accuracy in all spatial project activity
• archive and retrieve spatial data
• manage and manipulate spatial data
• manage files
• solve problems relating to height, depth, breadth, dimension, direction and position in actual operational activity and virtual representation
• abilities of work teams
• accuracy and precision requirements
• data capture methodology
• existing spatial datasets and dataset sources
• information management
• legislation as it applies to project work
• organisational policies and guidelines, such as OHS and pricing guidelines
• project management tools, techniques and methodologies
• quality management principles
• range of organisation’s spatial information product
• relevant legislative, statutory and industry requirements and standards
• resource management processes
• resource planning and costing
• risk analysis principles
• safe work practices
• spatial information principles and their application
• SIS project contingencies
• spatial reference systems
• spatial technologies
• use of spatial equipment for data capture and data set out
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:
assignment writing, thesis writing and study skills advice
maths and science developmental support and advice
English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit
Late submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official
due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special consideration:
Please Refer http://www.rmit.edu.au/staff/studentadmin/specialconsideration to find more information about special consideration
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Other Information:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview