Course Title: Apply basic electro and control scientific principles and techniques in aeronautical engineering sit
Part B: Course Detail
Teaching Period: Term1 2014
Course Code: MIET6326C
Course Title: Apply basic electro and control scientific principles and techniques in aeronautical engineering sit
School: 130T Vocational Engineering
Campus: City Campus
Program: C6131 - Advanced Diploma of Engineering (Aeronautical)
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: vehs@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Kemps Cheng
Location: 57.5.29
Telephone: 9925 4691
Fax: 9925 8099
Email: kemps.cheng@rmit.edu.au
Nominal Hours: 60
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
Nil
Course Description
This unit of competency covers applying basic electro and control scientific principles and techniques to aeronautical engineering situations.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
MEM23052A Apply basic electro and control scientific principles and techniques in aeronautical engineering sit |
Element: |
1. Research and identify the range of basic electro and control scientific principles and techniques relevant to aeronautical engineering |
Performance Criteria: |
1.1 Research and report on basic electro and control scientific principles relating to aeronautical engineering from appropriate sources of information and examination of applications |
Element: |
2. Select basic electro and control scientific principles and techniques relevant to particular aeronautical engineering applications |
Performance Criteria: |
2.1 Select the relevant basic electro and control scientific principles or particular aeronautical engineering situations
|
Element: |
3. Apply the relevant basic electro and control scientific principles and techniques appropriately |
Performance Criteria: |
3.1 Apply basic electro and control scientific principles in a consistent and appropriate manner to obtain any required solution
|
Element: |
4. Quote the results of the application of the basic electro and control scientific principles and techniques correctly |
Performance Criteria: |
4.1 Quote solutions for applications involving engineering calculations in an appropriate style
|
Learning Outcomes
Refer to Elements
Details of Learning Activities
You will involve in the following learning activities to meet requirements for this course and stage 1 competencies for Engineering Associates.
- Lectures
- Tutorials
- Practicals
- Class discussion
Engineers Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:
EA1.1. Comprehensive, theory based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the engineering
EA1.2. Conceptual understanding of the, mathematics, numerical analysis, statistics, and computer and information sciences which underpin the engineering discipline.
EA1.3. In-depth understanding of specialist bodies of knowledge within the engineering discipline.
EA1.4. Discernment of knowledge development and research directions within the engineering discipline.
EA1.5. Knowledge of contextual factors impacting the engineering discipline.
EA1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the specific discipline.
EA2.1. Application of established engineering methods to complex engineering problem solving.
EA2.2. Fluent application of engineering techniques, tools and resources.
EA2.3. Application of systematic engineering synthesis and design processes.
EA2.4. Application of systematic approaches to the conduct and management of engineering projects.
EA3.1. Ethical conduct and professional accountability.
EA3.2. Effective oral and written communication in professional and lay domains.
EA3.3. Creative, innovative and pro-active demeanour.
EA3.4. Professional use and management of information.
EA3.5. Orderly management of self and professional conduct.
EA3.6. Effective team membership and team leadership.
Engineers Australia Stage 1 Competencies are mapped with competency MEM23052A in the Assessment Matrix.
Teaching Schedule
Week | Topics Delivered |
Elements/Performance Criteria |
1 | Introduction to course, course guide, assessments, topics breakdown, resources, equipment (in the lab) & OHS issues. Electrical and Control Principles |
1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4 |
2 | Aircraft Batteries | 1.1, 1.2, 2.1, 2.2 |
3 |
Aircraft Batteries Aircraft Motors |
1.1, 1.2, 2.1, 2.2 |
4 |
Aircraft Motors Aircraft Generators Submit Assessment Task 1 (Part A) |
1.1, 1.2, 2.1, 2.2 |
5 | Aircraft Generators | 1.1, 1.2, 2.1, 2.2 |
6 | Aircraft Electrical Distribution Systems | 1.1, 1.2, 2.1, 2.2 |
7 | Aircraft Electrical Wiring and Control Devices | 1.1, 1.2, 2.1, 2.2 |
8 | System Simulator | 3.1, 3.2, 3.3, 3.4, 4.1, 4.2 |
9 |
Aircraft Electrical Wiring and Control Devices Submit Assessment Task 1 (Part B) |
3.1, 3.2, 3.3, 3.4, 4.1, 4.2 |
10 | Practical Demonstration-Avionics |
3.1, 3.2, 3.3, 3.4, 4.1, 4.2 |
11 | Design and Maintenance of Aircraft Electrical System Autoflight System |
3.1, 3.2, 3.3, 3.4, 4.1, 4.2 |
12 | Autoflight System | 3.1, 3.2, 3.3, 3.4, 4.1, 4.2 |
13 |
Engine Starting System Fire Detection and Control Systems |
3.1, 3.2, 3.3, 3.4, 4.1, 4.2 |
14 | Anti-skid Control System Anti-icing control System |
3.1, 3.2, 3.3, 3.4, 4.1, 4.2 |
15 | System Simulator |
3.1, 3.2, 3.3, 3.4, 4.1, 4.2 |
16 |
System Simulator Submit Assessment Task 2 |
1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2 |
17-18 |
Feedback | 1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2 |
Learning Resources
Prescribed Texts
Class notes and Tutorials. |
References
Aircraft Electricity and Electronics, Thomas K Eismin, McGraw-Hill |
0028018591 |
Microelectronics in Aircraft Systems, E H J Pallett |
Other Resources
Class notes available on Blackboard.
Overview of Assessment
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:
Assessment 1: Part A and Part B
Weighting towards final grade Part A (%): 10
Weighting towards final grade Part B (%): 40
Assessment 2: Test 1 and Test 2
Weighting towards final grade Test 1(%): 20
Weighting towards final grade Test 2 (%): 30
These tasks assesses the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Element/ Performance Criteria Covered |
Assessment 1 Part A & B |
Assessment 2 (Test 1 and Test 2) |
1.1 |
X |
X |
1.2 |
X |
X |
2.1 |
X |
X |
2.2 |
X |
X |
3.1 |
X |
X |
3.2 |
X |
X |
3.3 |
X |
X |
3.4 |
X |
X |
4.1 |
X |
X |
4.2 |
X |
X |
Assessment Tasks
Students must pass each of the following assessment tasks to demonstrate competency.
Assessment Task 1 – Written Project Report (Individual) (Part A - 5%, Part B - 35%)
Assessment Task 2 – Written Project Report (Group work - 2 to 3 students per group) (60%)
All assessment tasks need to be succesfully completed to demonstrate competency. Courses delivered in accordance with competency-based assessment, but which also utilise graded assessment.
CHD: Competent with High Distinction
CDI: Competent with Distinction
CC: Competent with Credit
CAG: Competency Achieved – Graded
NYC: Not Yet Competent
DNS: Did Not Submit for assessment
Assessment Matrix
Assessment vs MEM23052A Elements & Performance Criteria
MEM23052A Elements & Performance Criteria | ||||||||||
Assessments | 1.1 | 1.2 | 2.1 | 2.2 | 3.1 | 3.2 | 3.3 | 3.4 | 4.1 | 4.2 |
Assignment 1 | X | X | X | X | X | X | X | X | X | X |
Assignment 2 | X | X | X | X | X | X | X | X | X | X |
Assessment vs Engineers Australia Stage 1 Competencies
Engineers Australia Stage 1 Competencies | ||||||||||||||||
EA1.1 | EA1.2 | EA1.3 | EA1.4 | EA1.5 | EA1.6 | EA2.1 | EA2.2 | EA2.3 | EA2.4 | EA3.1 | EA3.2 | EA3.3 | EA3.4 | EA3.5 | EA3.6 | |
Assignment 1 | X | X | X | X | X | X | X | X | X | X | X | X | X | X | ||
Assignment 2 | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X |
All Assessments MEM23052A |
3 | 2 | 3 | 1 | 3 | 2 | 2 | 2 | 2 | 1 | 3 | 3 | 1 | 3 | 3 | 2 |
0 (Blank) | Graduate attribute is not assessed | |||||||||||||||
1 | Graduate attribute is assessed in at laest one, but less than one-third, of the Element. | |||||||||||||||
2 | Graduate attribute is assessed in at laest one third, but less than two-thirds, of the Element. | |||||||||||||||
3 | Graduate attribute is assessed more than two-thirds, of the Element. |
Other Information
Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is 20 hours outside the class time.
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:
- Assignment writing, thesis writing and study skills advice
- Maths and science developmental support and advice
- English language development
Please refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.
Late submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official
due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special consideration:
Please refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration.
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Email Communication:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview