Course Title: Apply basic electro and control scientific principles and techniques in aeronautical engineering sit

Part B: Course Detail

Teaching Period: Term2 2018

Course Code: MIET6326C

Course Title: Apply basic electro and control scientific principles and techniques in aeronautical engineering sit

School: 174T School of VE Engineering, Health & Science

Campus: City Campus

Program: C6131 - Advanced Diploma of Engineering (Aeronautical)

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vehs@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Andrew Kim
Ph: +61 3 9925 4295
Email: andrew.kim@rmit.edu.au 

Appointment by email

Dr. Amita Iyer
School of Vocational Engineering, Health and Science (SVEHS)
Program Manager
Tel: (03) 9925 8311
Fax: (03) 9925 4189
Email: amita.iyer@rmit.edu.au 


 

Nominal Hours: 60

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

Nil

Course Description

This unit of competency covers applying basic electro and control scientific principles and techniques to aeronautical engineering situations.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

MEM23052A Apply basic electro and control scientific principles and techniques in aeronautical engineering sit

Element:

1. Research and identify the range of basic electro and control scientific principles and techniques relevant to aeronautical engineering

Performance Criteria:

1.1 Research and report on basic electro and control scientific principles relating to aeronautical engineering from appropriate sources of information and examination of applications.


1.2 Identify basic electro and control techniques and associated technologies, software and hardware required to implement scientific principles relating to aeronautical engineering situations.

Element:

2. Select basic electro and control scientific principles and techniques relevant to particular aeronautical engineering applications

Performance Criteria:

2.1 Select the relevant basic electro and control scientific principles for particular aeronautical engineering situations.
2.2 Select the relevant basic electro and control techniques and associated technologies, software and hardware for particular aeronautical engineering situations.

Element:

3. Apply the relevant basic electro and control scientific principles and techniques appropriately

Performance Criteria:

3.1 Apply basic electro and control scientific principles in a consistent and appropriate manner to obtain any required solution.

3.2 Use appropriate calculations and coherent units in the solution of engineering calculations.

3.3 Use significant figures in engineering calculations.

3.4 Apply basic electro and control techniques and associated technologies, software and hardware in a consistent and appropriate manner to obtain required solutions.

Element:

4. Quote the results of the application of the basic electro and control scientific principles and techniques correctly

Performance Criteria:

4.1 Quote solutions for applications involving engineering calculations in an appropriate style.

4.2 Quote solutions for applications not involving engineering calculations in an appropriate style.


Learning Outcomes


Refer to Elements


Details of Learning Activities

You will be involved in the following learning activities to meet requirements for this course and stage 1 competencies for Engineering Associates.

• Lecture
• Tutorial
• Practicals
• Class discussion

Engineers Australia Mapping Information:

This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:

EA 1. Knowledge and Skill Base

EA1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.

EA 2. Engineering Application Ability

EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.

EA 3. Professional and Personal Attributes

EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.

Engineers Australia Stage 1 Competencies are mapped with competency MEM23052A in the Assessment Matrix.


Teaching Schedule

The proposed teaching schedule for this competency is detailed below:

 

Week

Topics Delivered

Elements/

Performance Criteria

1

Introduction to course, course guide, assessments, topics breakdown, resources, equipment (in the lab) & OHS issues.
Electrical and Control Principles

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

2

Aircraft Batteries


Assessment 1 - Part A and B are issued

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

3

Aircraft Batteries
Aircraft Motors

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

4

Aircraft Motors
Aircraft Generators


Assessment 1 - Part A due (Submission through Canvas)

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

5

Aircraft Generators

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

6

Aircraft Electrical Distribution Systems

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

7

Aircraft Electrical Distribution Systems
System Simulator


Assessment 2 - Test 1 Revision

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4

8

System Simulator


Assessment 2 - Test 1 - Topics covered in Chapter 1 - 5

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

9

Aircraft Electrical Wiring and Control Devices


Feedback:-
Assessment 1 – Part A
Assessment 2 – Test 1

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

10

Aircraft Electrical Wiring and Control Devices

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

11

Design and Maintenance of Aircraft Electrical System

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

12

Design and Maintenance of Aircraft Electrical System

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

13

Autoflight System
Engine Starting System

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

14

Fire Detection and Control Systems
Anti-skid Control System
Avionics Laboratory


Assessment 1 - Part B due (Submission through Canvas)

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

15

Anti-icing and De-icing Control Systems
Avionics Laboratory

Assessment 1 – Part B - Feedback

Assessment 2 – Test 2 – Revision

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

16

Assessment 2 – Test 2 – Topics covered in Chapter 6 - 10

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

17

Assessment 2 – Test 2 - Feedback

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

18

Assessment 2 – Test 1 and 2 – Re-Assessment

1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2

 

 Student directed hours involve completing activities such as reading online resources, assignments, individual student teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled nonteaching hours. The estimated time is minimum 15 hours outside the class time.


Learning Resources

Prescribed Texts

Class notes and Tutorials.


References

Aircraft Electricity and Electronics, Thomas K Eismin, McGraw-Hill

0028018591

Microelectronics in Aircraft Systems, E H J Pallett

Aircraft Systems, Ian Moir and Allan Seabridge, Wiley

Aircraft Electrical and Electronic Systems, Mike Tooley and David Wyatt, Butterworth-Heinemann


Other Resources

Students will be able to access information and learning materials through myRMIT and may be provided with additional materials in class. List of relevant reference books, resources in the library and accessible Internet sites will be provided where possible. During the course, you will be directed to websites to enhance your knowledge and understanding of difficult concepts.

Audio-visual aids, course notes available on Blackboard and relevant online resources.


Overview of Assessment

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:

 

Assessment 1: Part A and Part B

Weighting towards final grade Part A (%): 10

Weighting towards final grade Part B (%): 40

 

Assessment 2: Test 1 and Test 2

Weighting towards final grade Test 1(%): 20

Weighting towards final grade Test 2 (%): 30

 

These tasks assesses the following Course Learning Outcomes (CLOs):

 

Assessment Mapping Matrix

Element/

Performance Criteria Covered

Assessment 1 Part A & B

Assessment 2 (Test 1 and Test 2)

1.1

X

X

1.2

X

X

2.1

X

X

2.2

X

X

3.1

X

X

3.2

X

X

3.3

X

X

3.4

X

X

4.1

X

X

4.2

X

X

 

 

 

 

 

 

 


Assessment Tasks

Assessment 1: Assessment 1 Part A, Week 4 and Part B, Week 14
Weighting towards final grade Part A (%): 10%
Weighting towards final grade part B (%): 40%

Assessment 2: Test 1, Week 8 and Test 2, Week 16
Weighting towards final grade Test 1 (%): 20%
Weighting towards final grade Test 2 (%): 30%
 

This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:

80 - 100: CHD - Competent with High Distinction
70 - 79: CDI - Competent with Distinction
60 - 69: CC - Competent with Credit
50 - 59: CAG - Competency Achieved - Graded
0 - 49: NYC - Not Yet Competent
DNS - Did Not Submit for Assessment.


Assessment Matrix

 Assessment vs MEM23052A Elements & Performance Criteria

 MEM23052A Elements & Performance Criteria
Assessments 1.1 1.2 2.1 2.2 3.1 3.2 3.3 3.4 4.1 4.2
Assessment 1: Part A and Part B X X X X X X X X X X
Assessment 2: Test 1 and Test 2 X X X X X X X X X X

 Assessment vs Engineers Australia Stage 1 Competencies

Engineers Australia Stage 1 Competencies
  EA1.1 EA1.2 EA1.3 EA1.4 EA1.5 EA1.6 EA2.1 EA2.2 EA2.3 EA2.4 EA3.1 EA3.2 EA3.3 EA3.4 EA3.5 EA3.6
Assessment 1: Part A and Part B X X X X X X X X X X X X X  
Assessment 2: Test 1 and Test 2 X X X X         X          

All Assessments

MEM23052A

2 2 2 2 2 2 1 1 1 1 2 1 1 1 1 0
0 (Blank) Graduate attribute is not assessed
1 Graduate attribute is assessed in at laest one, but less than one-third of the Element.
2 Graduate attribute is assessed in at laest one third, but less than two-thirds of the Element.
3 Graduate attribute is assessed more than two-thirds of the Element.

Other Information

Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:

  • Relevant
    • Current
    • Satisfies the learning/competency outcomes of the course

Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
 

Study and learning Support: 

Study and Learning Centre (SLC) provides free learning and academic development advice to you. 
Services offered by SLC to support your numeracy and literacy skills are: 

assignment writing, thesis writing and study skills advice 
maths and science developmental support and advice 
English language development 

Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support 

Equitable Learning Services (ELS):

If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).

Late submission: 

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager. 
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted. 
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date. 

Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked. 


Special consideration: 

Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration 

Plagiarism: 

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University. 

Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism. 

Other Information: 

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

Course Overview: Access Course Overview