Course Title: Use advanced 2D & 3D computer aided drafting techniques
Part B: Course Detail
Teaching Period: Term2 2018
Course Code: COSC6175
Course Title: Use advanced 2D & 3D computer aided drafting techniques
School: 174T School of VE Engineering, Health & Science
Campus: City Campus
Program: C6156 - Advanced Diploma of Surveying
Course Contact: Thierry Demathieu
Course Contact Phone: +61 3 9925 8359
Course Contact Email: thierry.demathieu@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Dr. Toby Manning
RMIT University
Building 57, Level 5, Room 37
115 Queensberry St
Carlton 3053, Australia
Tel. +61 3 9925 4934
Email: toby.manning@rmit.edu.au
Nominal Hours: 80
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
None
Course Description
This unit of competency sets out the knowledge and skills required to create 2D and 3D wireframe and surface models and their representation on working drawings for engineering applications.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
VU21157 Use advanced 2D & 3D computer aided drafting techniques |
Element: |
1. Prepare for drawing |
Performance Criteria: |
1.1 OH&S and environmental requirements for a given work area are obtained and understood. |
Element: |
2. Perform drawing |
Performance Criteria: |
2.1 Relevant OH&S requirements for carrying out the work are followed. |
Element: |
3. Complete and report on drawing task |
Performance Criteria: |
3.1 Relevant OH&S requirements for completing the work are followed. |
Learning Outcomes
See elements above
Details of Learning Activities
The total number of scheduled hours of teaching, learning and assessment involved in this course includes all planned activities (face to face classes, lectures, workshops and seminars; workplace visits, online learning and other forms of structured teaching and learning). It also covers the amount of effort necessary to undertake, evaluate and complete all assessment requirements, observation of work performance, discussions with supervisors and others providing third party evidence and one on one and group assessment sessions with students.
Teaching Schedule
Week |
Topic |
Assessments |
Wk 19 |
Introduction |
|
Wk 20 |
Re-design CAD drawing |
|
Wk 21 |
2D drafting of internal measurements - Residential House |
Activity 1 |
Wk 22 |
RMIT internal measure-up |
Activity 2 |
Wk 23 |
RMIT internal measure-up |
Activity 2 |
Wk 24 |
School project – Management and deliverables |
Assessment 1 due Friday |
Wk 25 |
School visit 1 – reduce data/ folder structure/ CAD/ Fieldnotes |
|
Wk 26 |
Revit modelling 1 – Case Study |
|
Wk 27 |
Revit modelling 2 – Case Study |
|
Wk 28 |
Revit modelling 3 – Case Study |
|
Wk 29 |
Revit modelling 4 – Case Study |
Assessment 2 due Friday |
Wk 30 |
School visit 2 – reduce data/ folder structure/ CAD/ Fieldnotes |
|
Wk 31 |
School visit 3 – reduce data/ folder structure/ CAD/ Fieldnotes |
|
Wk 32 |
School project - office work |
|
Wk 33 |
School project - office work QA checks |
|
Wk 34 |
School project due |
Assessment 3 due Friday |
Wk 35 |
Revision |
|
Wk 36 |
Revision |
|
Learning Resources
Prescribed Texts
References
Other Resources
Check the Library Subject Guides:
http://rmit.libguides.com/geospatial
http://rmit.libguides.com/surveyingandspatial
Overview of Assessment
Assessment Tasks
You must pass each of the following assessment tasks to demonstrate competency
Assessment | |
Task 1 |
Assessment 1 |
Task 2 |
Assessment 2 |
Task 3 |
Assessment 3 |
Assessment Tasks
Assessment Tasks
You must pass each of the following assessment tasks to demonstrate competent.
Assessment | |
Task 1 |
Assessment 1 - Internal measurement exercise |
Task 2 |
Assessment 2 - 3D modelling using Revit |
Task 3 |
Assessment 3 - School WIL project Report |
Assessment Matrix
Assessment Mapping Matrix
Elements/ Performance Criteria Covered |
Task 1 |
Task 2 |
Task 3 |
1.1 |
X |
X |
|
1.2 |
X |
X |
|
1.3 |
X |
X |
|
1.4 |
X |
X |
|
1.5 |
X |
X |
|
1.6 |
X |
X |
|
2.1 |
X |
|
X |
2.2 |
X |
X |
|
2.3 |
X |
X |
X |
2.4 |
|
X |
X |
2.5 |
X |
|
X |
3.1 |
X |
|
X |
3.2 |
|
X |
X |
3.3 |
|
X |
X |
3.4 |
|
X |
X |
Other Information
Underpinning Skills and Knowledge
Literacy skills to assess, use workplace information and manage information
Read and write technical reports
Numeracy skills to analyse errors, record with accuracy and precision
Safe work practices
Surveying equipment requirements for data capture and data set out
Surveying reference systems
Surveying data capture and data set out methodologies technology skills to use instruments as part of engineering surveying projects
Engineering-related tasks and associated computations
Spatial skills to display proficiency in the operation of surveying equipment and exercise precision and accuracy in relation to spatial and aspatial data design
Archive and retrieve spatial data, manage and manipulate spatial data
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:
assignment writing, thesis writing and study skills advice
maths and science developmental support and advice
English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit
Late submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official
due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special consideration:
Please Refer http://www.rmit.edu.au/staff/studentadmin/specialconsideration to find more information about special consideration
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Other Information:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview