Course Title: Insert and issue a completed removable dental prosthesis

Part B: Course Detail

Teaching Period: Term2 2019

Course Code: DENT5854C

Course Title: Insert and issue a completed removable dental prosthesis

School: 174T School of VE Engineering, Health & Science

Campus: City Campus

Program: C6157 - Advanced Diploma of Dental Prosthetics

Course Contact: Rachael Starr

Course Contact Phone: +61 3 9341 1420

Course Contact Email: rachael.starr@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Nominal Hours: 100

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

Assumed knowledge and skills from the successful completion of the Diploma of Dental Technology.

Course Description

This unit of competency describes the skills and knowledge required to insert, alter and issue a completed removable dental prosthesis for dentate and edentulous patients. 

This unit applies to work in dental prosthetics.

 

 


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

HLTDEP006 Insert and issue a completed removable dental prosthesis

Element:

2. Check the removable dental prosthesis prior to insertion

Performance Criteria:

2.1 Decontaminate the completed removable dental prosthesis according to infection control guidelines

2.2 Remove potential injury-causing areas of the prosthesis prior to insertion

2.3Interpret advice from laboratory on fitting procedures and potential problems

Element:

3. Fit and evaluate the prosthesis

Performance Criteria:

3.1 Position the patient comfortably for the procedure

3.2 Instruct the patient on participation during the procedure

3.3 Examine the prosthesis for retention and stability

3.4 Check the fitting surfaces of the appliance and ensure there are no sharp ridges or acrylic pearls

3.5 Place denture in the mouth and assess that no over-extensions occur along the periphery of the dentures

3.6 Confirm that the occlusal relationships are acceptable

3.7 Assess aesthetics of removable dental prosthesis

3.8 Assess phonetics of removable dental prosthesis

3.9 Assess patient comfort of removable dental prosthesis

Element:

4. Alter prosthesis

Performance Criteria:

4.1 Use materials and equipment required to carry out alterations in accordance with manufacturers’ instructions

4.2 Alter the fitting surface when pressure is indicated or when discrepancies to retention and stability are found

4.3 Adjust occlusion of the prosthesis using occlusal indicator materials where required

4.4 Complete documentation

Element:

5. Evaluate procedure and instruct the patient

Performance Criteria:

5.1 Discuss hygiene and maintenance instructions for the removable dental prosthesis and supporting structures with the patient or carer

5.2 Provide advice on necessary follow up treatment to patient or carer

5.3 Reach mutual agreement that all outcomes of the treatment have been fulfilled

Element:

1. Prepare patient for procedure

Performance Criteria:

1.1 Prepare personal protective equipment for the patient and members of the dental team

1.2 Position patient correctly for procedure

1.3 Provide full details of the procedure to the patient or carer and confirm consent to follow treatment plan

1.4 Prepare equipment and materials in accordance with manufacturers’ instructions

 


Learning Outcomes


 You will be involved in the following learning activities to meet requirements for this competency:

- Face to Face classes

- Simulated Workplace Learning

- Online learning

- Other forms of structured teaching and learning

You will be observed and assessed through your planned activities throughout the duration of the course.

 

On completion of this course, you should be able to:

1. Prepare patient for procedure             

2. Check the removable dental prosthesis prior to insertion

3. Fit and evaluate the prosthesis 

4. Alter prosthesis 

5. Evaluate procedure and instruct the patient 


Details of Learning Activities

You will learn through a number of planned activities to meet the requirements of this competency (face to face classes, simulated workplace Learning, online learning, clinical placement and other forms of structured learning).  You will be observed and and assessed throughout the duration of the course.


Teaching Schedule

Delivered in classroom workshops, simulated clinic and clinical placement.  Schedules vary from group to group so your schedule will be posted online


Learning Resources

Prescribed Texts


References


Other Resources

Edentulous Patients  authors  Basker , Robins and Davenport 

Online, library resources.


Overview of Assessment

Assessment 1 - Clinical placement / Dental clinic (Recorded in log book and titanium ) 

Assessment 2 - Case Histories (Recorded from titanium and also from log book  ) 

Assessment 3 -Written knowledge assessment  / case scenarios

 

To be deemed competent you must demonstrate an understanding of all aspects required of the competency, the underpinning knowledge and the skill application. Assessment methods have been designed to measure your achievement of the competency in a flexible manner over multiple tasks.

  


Assessment Tasks

Assessment 1 . Clinical placement / Dental clinic (Recorded in log book and titanium )  min .-4 patients  / 2 dentate ,  2 edentulous ,  also a reline /  re base  and a repair and /or addition to existing dentures 

Assessment 2 . Case Histories (Recorded from titanium and also from log book  )   Hard copies completed of clinical pts . .and used in class discussions .(clinical based scenarios )

Assessment 3 . Written knowledge assessment  / case scenarios to exhibit critical thinking and problem solving abilities .


Assessment Matrix

Elements and

Performance criteria

Ass . 1

Ass . 2

Ass . 3

1.1

 x

 

 

1.2

 x

 

 

1.3

 x

 

 

1.4

 x

 

 

2.1

 x

 

 

2.2

 x

 x

 

2.3

 x

 x

 x

3.1

 x

 

 

3.2

 x

 

 

3.3

 x

 x

 

3.4

 x

 x

 

3.5

 x

 x

 

3.6

 x

 x

 

3.7

 x

 x

 x

3.8

 x

 x

 x

3.9

 x

 

 

4.1

 x

 x

 x

4.2

 x

 x

 

4.3

 x

 

 

4.4

 x

 x

 x

5.1

 x

 x

 x

5.2

 x

 x

 x

5.3

 x

 x

 x

Other Information

Grade level Competency Level

CA Competency Achieved -The learner will be able to apply facts, rules and standard solutions to achieve a predictable task or solve a problem.

NYC Not Yet Competent

-Although the learner exhibits access to a limited range of facts and rules, the learner has difficulty applying these facts and rules to a familiar task.

DNS: Did not submit assessment

Study and learning Support:

Study and Learning Centre (SLC) provides free learning and academic development advice to you.

Services offered by SLC to support your numeracy and literacy skills are: assignment writing, thesis writing and study skills advice B maths and science developmental support and advice

English language development

Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support

Equitable learning services:

If you are suffering from long-term medical condition or disability, you should contact equitable learning services to seek advice and support to complete your studies.

Please Refer http://www.rmit.edu.au/disability to find more information about services offered by equitable learning services .

 Assessment Submission:

Turnitin

Turnitin is an online text-matching service which can be used to support academic integrity and address at submission of the assessment.

 Good practice

  • Providing clear advice to you on the e-Submission process as part of their assessment expectations assists in ensuring that it is straightforward for RMIT You to submit work electronically.
  • You can submit non-electronic works via conversion by a digital scanner, i.e. paper-based assessments can be scanned and submitted for assessment via the e-Submission process.

Establishing a Turnitin assignment in Canvas is a quick way to provide an e-Submission process for a class group

You must submit all assessment tasks electronically via blackboard as directed by their teacher.

You are not to email or hand assessment tasks to teachers in  corridor or cafeteria etc

 Late submission:

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and

Lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.

The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.

If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.

Assignments submitted late without approval of an extension will not be accepted or marked.

 

Refer to RMIT University Policies and Procedures, verify for most recent version.

 Special consideration:

Please Refer http://www.rmit.edu.au/browse;ID=riderwtscifm (unresolved) to find more information about special consideration

 Plagiarism:

Plagiarism may occur in oral or written presentations. Plagiarism is the presentation of another person’s work, idea or creation as one’s own; without appropriate referencing. Plagiarism is not acceptable. The use of another person’s work or ideas must be acknowledged. Failure to do so may result in charges of academic misconduct, which may result in cancellation of results and exclusion from your course.

Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism

Other Information:

Course Overview: Access Course Overview