Course Title: Produce technical drawings

Part B: Course Detail

Teaching Period: Term2 2014

Course Code: GRAP5297C

Course Title: Produce technical drawings

School: 320T Architecture & Design

Campus: City Campus

Program: C4251 - Certificate IV in Interior Decoration

Course Contact : Jennifer Crowley

Course Contact Phone: +61 3 9925 4819

Course Contact

Name and Contact Details of All Other Relevant Staff

John Perperis

Phillip Ferrotto

Nominal Hours: 50

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

This unit has linkages to a wide range of other units in various Training Packages and combined assessment and/or training would be appropriate.

Course Description

This unit describes the skills and knowledge required to develop and refine a range of techniques to produce technical drawings. It outlines the ways technical drawing can be applied to a range of contexts where visual representation is required. People working in many industries require the skills and knowledge in this unit, and the unit is written to allow for contextualisation to a particular industry context. This work would usually be carried out independently, although guidance would be available if required.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement.

National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

CUVCRS04B Produce technical drawings


1.  Determine technical drawing requirements

Performance Criteria:

1.1 Review relevant documentation/concept information to determine technical drawing requirements.
1.2 Where appropriate, liaise with relevant colleagues to confirm and clarify technical drawing requirements.


2.  Select techniques

Performance Criteria:

2.1 Identify and select appropriate materials, tools and equipment suitable for technical drawing.
2.2 Safely follow procedures to test and practise a range of technical drawing techniques.


3.  Produce technical drawings

Performance Criteria:

3.1 Select the most appropriate technical drawing technique for the work to be produced.
3.2 Select the materials, tools and equipment appropriate to the technique.
3.3 Use technical drawing techniques correctly to production drawings which are consistent with concept/purpose of the drawing.

Learning Outcomes

This unit describes the skills and knowledge required to develop and refine a range of techniques to produce technical drawings.

Details of Learning Activities

Learning activities will take place in a studio, workshop or classroom using industry standard tools and resources. You will complete exercises and industry style projects. You will also be required to undertake independent study.

In class activities may include:

class exercises to review discussions/lectures
practical demonstrations
design activities or projects
peer teaching and class presentations
independent project based work
teacher directed group activities/projects
studio practice

‘workshopping’ of student projects including peer/lecturer feedback

Please note: While your teacher will cover all the material in this schedule, the weekly order is subject to change depending on class needs and availability of speakers and resources.

Teaching Schedule

Please note: While your teacher will cover all the material in this schedule, the weekly order is subject to change depending on class needs and availability of speakers and resources.


COURSE  CONTENT                               

Week 1
What is technical drawing? Materials and equipment required. Using equipment




Week 2
Drafting Conventions: Sheet sizes. Title blocks. Lettering. Scale. Line weights. Symbols and abbreviations.
Project 1: Drafting Conventions
  1 & 2
Week 3

Orthographic projection:                 Plan, elevation and section.

Project 2: Residential House Plan /Bedroom



 1 & 2
Week 4
Supervised studio activity: Complete house plan in pencil. Begin to ink up plan ready to complete next week. DueTask1 1, 2 & 3
 Week 5Drafting Conventions: Drafting in ink, line weights. Annotations.   1, 2 & 3
 Week 6
Orthographic projection:
Site measure tips and equipment.

Elevation of Bedroom

   1, 2 & 3
 Week 7
Supervised studio activity:
Existing bedroom plan and elevations to be drafted in pencil.
Proposed bedroom plan and elevation to be worked out using 1:20 scale
   1, 2 & 3
 Week 8Supervised studio activity:
 Proposed bedroom plan and elevations to be traced in ink
 DueTask2  1, 2 & 3

Learning Resources

Prescribed Texts

Australian Standards AS1100.301-2008 Technical Drawing Part 301: Archtitecural drawing Http://


Yee,R (1997). Architectural drawing. A compendium of types & methods. New York: John Wiley Wilkie, G& Arden, s (2001). Building your home. A comprehensive guide for Australian owner builders. Australia: New  Holland Publishers Ching, FDK, & Adams C. (2001) Building construction illustrated. 3rd Ed Canada: John Wiley & Sons Inc

Other Resources

Equipment & Materials

Black lead pencils 2 each of HB, H , 2H

1 Pencil eraser ( white)

1 Blue ink erasor

1A3 size Cartridge Drawing Paper pad (110 gsm)

1 A3 size Tracing Paper pad (110 gsm)

1 Scale Ruler eg : Kent  No . 403 or Staedtler 561 98-2 (scales needed on rule 1:100, 1: 50, 1 :20)

1 45/ 45 degree set square

1 60/30 degree set square

1 sat technical Drawing pens ( steel tip sizes required : 0 .25 0.35, 0.5, ) or ( felt tip staedtler . 1, 3, 5)

1 staedtler mars Circle Templare no 510

1 roll of masking tape

No 10 surgical blade

The University Library has extensive resources for Interior Design students

The Library has produced a subject guide that includes quality online and print resources for  your studies

The Library provides guides on academic referencing http://wwwrmit.eduau/library/referencing

and subject specialist help via your Liason Librarian Mary Mavroudis

Overview of Assessment

The following evidence is critical to the judgement of competence in this unit:
• production of technical drawings which show a command of the selected techniques and meet the required purpose/objectives
• knowledge of technical drawing techniques and their application to specific contexts.

The assessment context must provide for:
• practical demonstration of skills using required materials, tools and equipment to produce technical drawings consistent with the concept/work requirements.

Assessment Tasks

 Please note that GRAP 5297 Produce Tecnical Drawing is taught with this course GRAP 5296C Drawing Techniques

Assessment will consist of thee technical drawings projects:Assessment tasks in this course are either formative or summative. Formative tasks provide the basis for ongoing feedback and can be considered essential building blocks for the more substantial summative assessment tasks. Summative assessment tasks in this course are graded. Feedback throughout the course may be written, verbal or a combination of both. To demonstrate competency in this course you need to complete each one of the following pieces of assessment to a satisfactory standard.

Task 1: An exercise in which you will demonstrate skills and knowledge in drafting conventions - Due Week 4

Task 2: A technical drawing of a residential house Bedroom plan elevations - Due Week 14


Grades which apply to courses delivered in accordance with competency-based assessment, but which also use graded assessment
HD Competent with High Distinction
CDI Competent with Distinction
CC Competent with Credit
CAG Competency Achieved - Graded
NYC Not Yet Competent
DNS Did Not Submit for Assessment


Grades which apply to courses delivered in accordance with competency-based assessment (not graded).
CA Competency Achieved
NYC Not Yet Competent
DNS Did Not Submit for Assessment

Assessment Matrix

An assessment matrix demonstrating alignment of assessment tasks with the relevant Unit of Competency is available from the course contact person (stated above).

Other Information

The major learning experience involves studio based exercises, demonstration and production. It is strongly advised that you attend all sessions in order to engage in the required learning activities, ensuring the maximum opportunity to gain the competency.

Feedback: You will receive verbal and written feedback by teacher on your work. This feedback also includes suggestions on how you can proceed to the next stage of developing your projects.
Student feedback at RMIT:;ID=9pp3ic9obks7

Student Progress:
Monitoring academic progress is an important enabling and proactive strategy to assist you to achieve your learning potential. Student progress policy:;ID=vj2g89cve4uj1

Special consideration Policy: (Late Submission)
All assessment tasks are required to be completed to a satisfactory level. If you are unable to complete any piece of assessment by the due date, you will need to apply for an extension. Special consideration, appeals and discipline:;ID=qkssnx1c5r0y

Cover Sheet for Submissions:
You must complete a submission cover sheet for every piece of submitted work. This signed sheet acknowledges that you are aware of the plagiarism implications.

Academic Integrity and Plagiarism: RMIT University has a strict policy on plagiarism and academic integrity. Please refer to the website for more information on this policy go to Academic Integrity:;ID=kw02ylsd8z3n

Course Overview: Access Course Overview