Course Title: Manage large electrical projects

Part B: Course Detail

Teaching Period: Term2 2018

Course Code: BUSM6477C

Course Title: Manage large electrical projects

School: 174T School of VE Engineering, Health & Science

Campus: City Campus

Program: C6120 - Advanced Diploma of Engineering Technology - Electrical

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vehs@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Zoran Savic
Ph: +61 3 9925 4996
Email: zoran.savic@rmit.edu.au

Appointment by email

Nominal Hours: 40

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

UEENEEE101A

Course Description

This unit covers the management of large electrical projects involving design, modifications, installation, and/or maintenance of systems and equipment. The unit encompasses management of safety, budget variation, personnel, resources, critical path timelines and completion documentation.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

UEENEEG169A Manage large electrical projects

Element:

1. Establish the scope of the project.

Performance Criteria:

1.1 OHS procedures for a given work area are identified, obtained and understood.
1.2  OHS risk control work preparation measures and procedures are followed.
1.3 The nature of the circuit(s) problem is obtained from documentation or from work supervisor to establish the scope of work to be undertaken.
1.4 Advice is sought from the work supervisor to ensure the work is coordinated effectively with others.
1.5 Sources of materials that may be required for the work are established in accordance with established procedures.
1.6 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety.
 

Element:

2. Manage project.

Performance Criteria:

2.1 OHS risk control work measures and procedures are followed.
2.2 The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures.
2.3  Circuits are checked as being isolated where necessary in strict accordance OHS requirements and procedures.
2.4 Established methods are used for solving circuit problems from measure and calculated values as they apply to complex polyphase power circuits.
2.5 Unexpected situations are dealt with safely and with the approval of an authorised person.
2.6 Problems are solved without damage to apparatus, circuits, the surrounding environment or services and using sustainable energy practices.

Element:

3. Complete project.

Performance Criteria:

3.1 OHS work completion risk control measures and procedures are followed.
3.2 Work site is cleaned and made safe in accordance with established procedures.
3.3 Justification for solutions used to solve circuit problems is documented.
3.4 Work completion is documented and an appropriate person or persons notified in accordance with established procedures.
 


Learning Outcomes


Refer to Elements


Details of Learning Activities

This course is delivered in a cluster (Electrical Project 2) in conjunction with UEENEEG170A (BUSM6478C), UEENEEE071B (BUSM6358C),  UEENEEE137A (OHTH5731C) & UEENEEE083A (EMPL7064C). You must enrol in all four courses delivered in this cluster. All the learning and assessment activities will include the components of all competencies UEENEEG170A, UEENEEG169A, UEENEEE137A, UEENEEE071B & UEENEEE083A. Please refer to the course guide Part B for course UEENEEG170A (BUSM6478C) for the learning activities and Engineers Australia Mapping Information.


Teaching Schedule

As this course is delivered in cluster, please refer to the course guide Part B for course UEENEEG170A (BUSM6478C) for the proposed teaching schedule.


Learning Resources

Prescribed Texts


References


Other Resources

Students will be able to access information and learning materials through myRMIT and may be provided with additional materials in class. List of relevant reference books, resources in the library and accessible Internet sites will be provided where possible. During the course, you will be directed to websites to enhance your knowledge and understanding of difficult concepts


Overview of Assessment

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:

Assessment 1: Project 1 report
Weighting towards final grade (%): 50

Assessment 2: Project 2 report
Weighting towards final grade (%): 50

These tasks assesses the following Course Learning Outcomes (CLOs):

 Assessment Mapping Matrix

Element/

Performance Criteria Covered

Project 1 report

Project 2 report

1.1

X

X

1.2

X

X

1.3

X

X

1.4

X

X

1.5

X

X

2.1

X

X

2.2

X

X

2.3

X

X

2.4

X

X

2.5

X

X

2.6

X

X

2.7

X

X

2.8

X

X

3.1

X

X

3.2

X

X

3.3

X

X


Assessment Tasks

As this course is delivered in cluster, please refer to the course guide Part B for course UEENEEG170A (BUSM6478C) for assessment tasks.


Assessment Matrix

As this course is delivered in cluster, please refer to the course guide Part B for course UEENEEG170A (BUSM6478C) for assessment matrix.

Other Information

Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:

  • Relevant
  • Current
  • Satisfies the learning/competency outcomes of the course

Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
 

Study and learning Support: 

Study and Learning Centre (SLC) provides free learning and academic development advice to you. 
Services offered by SLC to support your numeracy and literacy skills are: 

assignment writing, thesis writing and study skills advice 
maths and science developmental support and advice 
English language development 

Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support 

Equitable Learning Services (ELS):

If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).

Late submission: 

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager. 
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted. 
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date. 

Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked. 


Special consideration: 

Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration 

Plagiarism: 

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University. 

Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism. 

Other Information: 

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

Course Overview: Access Course Overview