Course Title: Fault find and repair analogue circuits and components in electronic control systems
Part B: Course Detail
Teaching Period: Term1 2015
Course Code: EEET7035C
Course Title: Fault find and repair analogue circuits and components in electronic control systems
School: 130T Vocational Engineering
Campus: City Campus
Program: C6120 - Advanced Diploma of Engineering Technology - Electrical
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: firstname.lastname@example.org
Name and Contact Details of All Other Relevant Staff
Dr Gita Pendharkar
Phone: +613 9925 4701
Nominal Hours: 60
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
This unit covers complying and producing an energy sector report. It encompasses determining the safety requirements are met and all regulatory responsibilities are adhered to. The person competent in this unit must demonstrate an ability to identify information sources and collect and analyse and format information applicable to the electrotechnology industry and produce a report as required.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title:
UEENEEI124A Fault find and repair analogue circuits and components in electronic control systems
1. Prepare to fault find and repair
1.1 OHS procedures for a given work area are identified, obtained and understood.
2. Fault find and repair
2.1 OHS risk control measures and procedures for carrying out the work are followed.
3. Complete and report fault find and repair activities
3.1 OHS work completion risk control measures and procedures are followed.
Refer to Elements
Details of Learning Activities
You will involve in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates
Industrial visit (Optional)
Engineers Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:
EA 1. Knowledge and Skill Base
EA1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.
EA 2. Engineering Application Ability
EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.
EA 3. Professional and Personal Attributes
EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.
Engineers Australia Stage 1 Competencies are mapped with competency UEENEEI124A in the Assessment Matrix.
The proposed teaching schedule for this competency is detailed below:
|Week||Topics Delivered||Elements/Performance Criteria|
|1||Introduction to OHS and the course (OH&S assessment 1%)||1.1, 1.2, 1.3, 2.1|
|2||Op- Amplifier Fundamentals||1.1, 1.2, 1.3, 1.4, 1.5|
|3|| Amplifier Fundamentals Single stage amplifiers (Laboratory 1-3%)||1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4|
|4||Op amp/A C Amplifier Fundamentals||1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 2.4, 2.5|
|5||Opamp RC circuits, Integrator, Differentiator circuits continued (Laboratory 2- 3%)||1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4|
|6||Op amp Applications /diode circuits||1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 2.4, 2.5|
|7-8||Analog Active Filters (Laboratory 3 – 4%)||1.1, 1.2, 1.3, 2.1- 2.11, 3.1, 3.2, 3.3, 3.4|
Op-amp Positive Feedback
Op-amp Comparators ( Laboratory 4- 4%)
|1.1, 1.2, 1.3, 2.1- 2.11, 3.1, 3.2, 3.3, 3.4|
|10|| Op amp Oscillators|
Practical Test (15%)
|1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4|
Multistage Amplifiers &
Start Project Work
|1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 2.4, 2.5|
|12||Project Work||1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 2.4, 2.5|
|13||Project Work||1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 2.4, 2.5|
|14||Project Work||1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 2.4, 2.5|
|15 & 16||Course Revision and Submit Project (20%)||1.1-1.6, 2.1- 2.11, 3.1-3.4|
|17 - 18||Test (50%)||1.1-1.6, 2.1- 2.11, 3.1-3.4|
Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is minimum 25 hours outside the class time.
Op-amps and Linear Integrated Circuits By Ramakant Gayakwad
Additional information can be obtained on the school local drive and blackboard.
Overview of Assessment
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:
Assessment 1: Laboratories
Weighting towards final grade (%):30
Assessment 2: Project
Weighting towards final grade (%):20
Assessment 3: Test
Weighting towards final grade (%): 50
These tasks assesses the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Assessments are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.
Practical Assessment: In Practical assessments you will be required to complete the following:
Laboratories :30% (Week 3-12)
Project:20% ( (Week 13-16)
Theory Assessment: In theory assessment you will be required to complete the following:
Test (Closed Book) :50% (Week 17-18)
This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:
80 - 100: CHD - Competent with High Distinction
70 - 79: CDI - Competent with Distinction
60 - 69: CC - Competent with Credit
50 - 59: CAG - Competency Achieved - Graded
0 - 49: NYC - Not Yet Competent
DNS - Did Not Submit for Assessment.
Assessment vs UEENEEI124A Elements & Performance Criteria
|UEENEEI124A Elements & Performance Criteria|
Assessment vs Engineers Australia Stage 1 Competencies
|Engineers Australia Stage 1 Competencies|
|All Assessments UEENEEI124A||3||2||3|| 3||3||3||2||2||2||2||2||3||2||3||2||2|
|0 (Blank)||Graduate attribute is not assessed.|
|1||Graduate attribute is assessed in at least one, but less than one-third, of the Element.|
|2||Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element.|
|3||Graduate attribute is assessed in more than two-thirds of the Element.|
Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
• Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
Study and Learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:
- Assignment writing, thesis writing and study skills advice
- Maths and science developmental support and advice
- English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Please refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: http://www.rmit.edu.au/academicintegrity to find more information about plagiarism.
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview