Course Title: Develop engineering solutions to RF amplifiers problems

Part B: Course Detail

Teaching Period: Term2 2015

Course Code: EEET7060C

Course Title: Develop engineering solutions to RF amplifiers problems

School: 130T Vocational Engineering

Campus: City Campus

Program: C6122 - Advanced Diploma of Electronics and Communications Engineering

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vocengineering@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Kemps Cheng
Phone: 613 9925 4691
Email: kemps.cheng@rmit.edu.au

   

Nominal Hours: 40

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

UEENEEE101A

Course Description

This unit covers developing engineering solutions to resolve problems with RF amplifiers. It encompasses working safely, applying extensive knowledge of RF amplifier circuits and device operation and their application, gathering and analysing data, applying problem solving techniques, developing and documenting solutions and alternatives.
Note: Typical RF amplifiers electronic problems are those encountered in meeting performance requirements and compliance standards, revising an RF amplifier electronic operating parameters and dealing with RF amplifiers electronic malfunctions.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

UEENEEH182A Develop engineering solutions to RF amplifiers problems

Element:

1. Prepare to develop engineering solution for RF amplifiers electronic problems.

Performance Criteria:

1.1 OHS processes and procedures for a given work area are obtained and understood.
1.2 Established OHS risk control measures and procedures are followed in preparation for the work.
1.3 The extent of the RF amplifiers problem is determined from performance specifications and situation reports and in consultations with relevant persons.
1.4 Activities are planned to meet scheduled timelines in consultation with others involved in the work.
1.5 Effective strategies are formed to ensure solution development and implementation is carried out efficiently.
 

Element:

2. Develop engineering solution for RF amplifiers electronic problems.

Performance Criteria:

2.1 OHS risk control measures and procedures for carrying out the work are followed.
2.2 Knowledge of RF amplifiers circuit, device operation, characteristics and applications are applied to developing solutions to RF amplifiers problems.
2.3 Parameters, specifications and performance requirements in relation to each RF amplifiers problem are obtained in accordance with established procedures.
2.4 Approaches to resolving RF amplifiers problems are analysed to provide most effective solutions.
2.5 Unplanned events are dealt with safely and effectively consistent with regulatory requirements and enterprise policy.
2.6 Quality of work is monitored against personal performance agreement and/or established organizational or professional standards
 

Element:

3. Test, document and implement engineering solution for RF amplifiers electronic problems.

Performance Criteria:

3.1 Solutions to RF amplifiers problems are tested to determine their effectiveness and modified where necessary.
3.2 Adopted solutions are documented including instruction for their implementation that incorporates risk control measure to be followed.
3.3 Appropriately competent and qualified person(s) required to implement solutions to RF amplifiers problems are coordinated in accordance with regulatory requirements and enterprise policy. (See Note)
3.4 Justification for solutions used to solve RF amplifiers problems is documented for inclusion in work/project development records in accordance with professional standards.
 


Learning Outcomes


Refer to Elements


Details of Learning Activities

You will involve in the following learning activities to meet requirements for the three clustered competencies (UEENEEH167A, UEENEEH168A, UEENEEH182A) and stage 1 competencies for Engineering Associates

  • Lectures
  • Classroom tutorial
  • Practical activities
  • Report
  • Industrial visit
     

Cluster Information:

This course is delivered in a cluster (Communication Engineering 2) in conjunction with UEENEEH167A (EEET7041C) & UEENEEH168A (EEET7042C). You must enrol in all three courses delivered in this cluster. All the learning and assessment activities will include the components of all competencies UEENEEH167A, UEENEEH168A and UEENEEH182A.

Elements and Performance Criteria for UEENEEH167A (EEET7041C)
1. Prepare to commission electronics and communications systems.
1.1 OHS procedures for a given work area are obtained and understood.
1.2 Established OHS risk control measures and procedures in preparation for the work are followed.
1.3 Safety hazards that have not previously been identified are noted and established risk control measures are implemented.
1.4 Appropriate personnel are consulted to ensure the work is co-ordinated effectively with others
involved on the work site.
1.5 System operating parameters are identified by reviewing system specifications and component technical data.
1.6 Tools, equipment, applications, and testing devices needed for the work are obtained in accordance with established procedures and checked for correct operation and safety.
1.7 Preparatory work is checked to ensure no unnecessary damage has occurred and complies with requirements.
1.8 Circuits are checked as being isolated, where necessary, in strict accordance OHS requirements and procedures.
2. Commission electronics and communications systems.
2.1 OHS risk control measures and procedures for carrying out the work are followed.
2.2 Testing/measuring devices are connected and set up in accordance with requirements for a particular system.
2.3 Measurements and adjustments are made to electronics and communications equipment to provide optimum system performance in accordance with system specifications and/or regulatory requirements.
2.4 Decisions for dealing with unexpected situations are made from discussions with appropriate persons and job specifications and requirements.
2.5 Methods for dealing with unexpected situations are selected on the basis of safety and specified
work outcomes.
2.6 Systems’ commissioning procedures are performed in accordance with requirements.
2.7 Commissioning is carried out efficiently without unnecessary waste of materials or damage to
apparatus, the surrounding environment or services and using sustainable energy principles.
3. Completion and report commissioning activities.
3.1 OHS risk control work completion measures and procedures are followed.
3.2 Adjustment settings are documented in accordance with established procedures.
3.3 Work site is cleaned and made safe in accordance with established procedures.
3.4 Commissioning results and work completion are notified to appropriate person or persons in accordance with established procedures
 

Elements and Performance Criteria for UEENEEH168A (EEET7042C)
1. Prepare to modify-redesign of electronics and communications system(s).
1.1 OHS procedures for a given work area are obtained and understood.
1.2 Established OHS risk control measures and procedures in preparation for the work are followed.
1.3 Safety hazards that have not previously been identified are noted and established risk control measures are implemented.
1.4 Appropriate personnel are consulted to ensure the work is co-ordinated effectively with others involved on the work site.
1.5 System operating parameters are identified by reviewing system specifications and component technical data.
1.6 The limitations, use and operation of the system to be modified is established from original specifications, manufacturers’ data and the like
1.7 The extent of modification is determined from measurements, tests, inspections, system limitations and other relevant requirements
1.8 Specifications and instructions for the modifications are documented in accordance with requirements and organisational procedures
1.9 Tools, equipment, applications, and devices needed for the work are obtained in accordance with established procedures and checked for correct operation and safety.
2. Generate modification-redesign of electronics and communications system(s).
2.1 OHS risk control measures and procedures for carrying out the work are followed.
2.2 Alternative modification arrangements are considered and discussed with appropriate personnel
2.3 Safety, functionality and economic considerations are incorporated in the proposed modification design
Proposed modification complies with all requirements and includes specifications and documentation for alteration of the system(s)
Changes in the use and operation of the system(s) as a consequence of the proposed modification are included in the documentation
2.4 Decisions for dealing with unexpected situations are made from discussions with appropriate persons and job specifications and requirements.
2.5 Methods for dealing with unexpected situations are selected on the basis of safety and specified work outcomes.
2.6 Modification-redesign is carried out efficiently without unnecessary waste of materials or damage to apparatus, the surrounding environment or services and using sustainable energy principles.
3. Completion and report modification-redesign activities.
3.1 OHS risk control work completion measures and procedures are followed.
3.2 Proposed modification is checked under established procedures for compliance with all relevant requirements
3.3 Work site is cleaned and made safe in accordance with established procedures.
3.4 Proposed modification is submitted for appropriate organisational approval and, where applicable, statutory or regulatory approval
3.5 Approved copies of the modification-redesign documents are issued, and copies retained, documented and stored in records in accordance with established procedures and requirements
 

Engineers Australia Mapping Information:

This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:


EA 1. Knowledge and Skill Base

EA1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.

EA 2. Engineering Application Ability

EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.

EA 3. Professional and Personal Attributes

EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.

Engineers Australia Stage 1 Competencies are mapped with cluster of competencies of UEEHEEH167A, UEENEEH168A, UEENEEH182A in the Assessment Matrix.
 

   


Teaching Schedule

The proposed teaching schedule for the 3 clustered competencies (UEEHEEH167A, UEENEEH168A, UEENEEH182A) is detailed below:

Week Topics Delivered Elements / Performance Criteria
1 Introduction to course, course guide, assessments, topics breakdown, resources, equipment (in the lab) & OHS issues. UEENEEH182A: 1.1, 1.2
UEENEEH167A: 1.1, 1.2
UEENEEH168A: 1.1, 1.2
 
2 Prepare to develop engineering solution by types of transmission line, characteristics of standing wave along transmission line. Describe the characteristics of real transmission line. UEENEEHH182A: 1.1, 1.5, 2.1 - 2.4
UEENEEH 167A: 1.1-1.8, 2.1-2.3
UEENEEH 168A: 1.1-1.10, 2.1-2.3
 
3 Prepare to develop engineering solution by types of transmission line, characteristics of standing wave along transmission line. Describe the characteristics of real transmission line UEENEEH 182A: 1.1-1.5, 2.1-2.6
UEENEEH167A: 1.1-1.8, 2.1-2.5
UEENEEH 168A: 1.1-1.9, 2.1-2.3
 
4 Develop engineering solution by types of transmission line, characteristics of standing wave along transmission line. Describe the characteristics of real transmission line. UEENEEH182A: 1.1-1.5, 2.1-2.6
UEENEEH167A:1.1-1.8, 2.1-2.7
UEENEEH 168A: 1.1-1.10, 2.1-2.6
 
5 Develop engineering solution by types of transmission line, characteristics of standing wave along transmission line. Describe the characteristics of real transmission line. UEENEEH182A: 2.1-2.6, 3.1-3.4
UEENEEH167A:1.1-1.8, 2.1-2.7
UEENEEH168A: 1.1-1.10, 2.1-2.6
 
6 Test, document and implement engineering solution by types of transmission line, characteristics of standing wave along transmission line. Describe the characteristics of real transmission line. UEENEEH182A: 2.1-2.6, 3.1-3.4
UEENEEH167A: 2.1-2.7, 3.1-3.4
UEENEEH168A: 1.1-1.10, 2.1-2.6
 
7 Prepare to develop engineering solution on EH field in relations to antenna elements. Basic antenna principles. Antenna characteristics and selection of antennas. The use of microwave antenna. [Assignment issued] UEENEEH182A: 1.1-1.5, 2.1-2.6
UEENEEH167A: 2.1-2.7, 3.1-3.4
UEENEEH168A: 1.1-1.10, 2.1-2.6
 
8 Develop engineering solution on EH field in relations to antenna elements. Basic antenna principles. Antenna characteristics and selection of antennas. The use of microwave antenna. [Project 1 issued] UEENEEH182A: 1.1-1.5, 2.1-2.6
UEENEEH167A: 1.1-1.8, 2.1-2.7
UEENEEH168A: 1.1-1.10, 2.1-2.6
 
9 Test, document and implement engineering solution on EH field in relations to antenna elements. Basic antenna principles. Antenna characteristics and selection of antennas. The use of microwave antenna. UEENEEH182A: 2.2-2.6, 3.1-3.4
UEENEEH167A: 1.1-1.8, 2.1-2.7
UEENEEH168A: 1.1-1.10, 2.1-2.6
 
10 Modify-redesign of electronics and communications systems. UEENEEH182A: 2.1-2.6, 3.1-3.4
UEENEEH167A: 1.1-1.8, 2.1-2.7
UEENEEH168A: 1.1-1.10, 2.1-2.6, 3.1-3.5
 
11 Modify-redesign of electronics and communications systems. UEENEEH182A: 2.1-2.6, 3.1-3.4
UEENEEH167A: 2.1-2.7, 3.1-3.4
UEENEEH168A: 2.1-2.6, 3.1-3.5
 
12 Commission electronics and communications systems. UEENEEH182A: 2.1-2.6, 3.1-3.4
UEENEEH167A: 2.1-2.7, 3.1-3.4
UEENEEH168A: 2.1-2.6, 3.1-3.5
 
13 Commission electronics and communications systems. UEENEEH182A: 2.1-2.6, 3.1-3.4
UEENEEH167A: 2.1-2.7, 3.1-3.4
UEENEEH168A: 2.1-2.6, 3.1-3.5
 
14 Preparing the final project. UEENEEH182A: 2.1-2.6, 3.1-3.4
UEENEEH167A: 2.1-2.7, 3.1-3.4
UEENEEH168A: 2.1-2.6, 3.1-3.5
 
15 Preparing the final project. UEENEEH182A: 2.1-2.6, 3.1-3.4
UEENEEH167A: 2.1-2.7, 3.1-3.4
UEENEEH168A: 2.1-2.6, 3.1-3.5
 
16 Presentation for the final project. UEENEEH182A: 2.1-2.6, 3.1-3.4
UEENEEH167A: 2.1-2.7, 3.1-3.4
UEENEEH168A: 2.1-2.6, 3.1-3.5
 
17-18 Test UEENEEH182A: 1.5, 2.2, 2.3, 3.1
UEENEEH167A: 1.5, 2.5
UEENEEH168A: 1.5, 1.6, 2.3- 2.5, 3.1
 

Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is minimum 32 hours outside the class time.

   


Learning Resources

Prescribed Texts


References

• Gary M. Miller, Modern Electronic Communication, the latest edition, Prentice Hall
• Sinnema, W., Electronics Transmission Technology, 2nd Edition, Prentice Hall


Other Resources

Resources materials will be available on S:\C6122|EEET7060C and myRMIT>Studies>EEET7060C

   


Overview of Assessment

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:

Assessment 1: Test
Weighting towards final grade (%): 40

Assessment 2: Project Assignment
Weighting towards final grade (%): 50

Assessment 3: Laboratory Exercise
Weighting towards final grade (%): 10
These tasks assesses the following Course Learning Outcomes (CLOs):

Assessment Mapping Matrix

Element/Performance Criteria Covered Project Lab Exercise Test
1.1 x x
1.2 X X  
1.3 X X  
1.4 X X  
1.5 X X  
2.1 X   X
2.2 X   X
2.3 X   X
2.4 X   X
2.5 X   X
2.6 X   X
3.1 X   X
3.2 X   X
3.3 X   X
3.4 X   X


Assessment Tasks

  • Test, 40 %
  • Project/Assignment, 50%
  • Laboratory Exercise,10 %

This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:

80 - 100: CHD - Competent with High Distinction
70 - 79: CDI - Competent with Distinction
60 - 69: CC - Competent with Credit
50 - 59: CAG - Competency Achieved - Graded
0 - 49: NYC - Not Yet Competent
DNS - Did Not Submit for Assessment.
 

   


Assessment Matrix

  Assessment vs UEENEEH182A Elements & Performance Criteria

  UEENEEH182A Elements & Performance Criteria
Assessments 1.1 1.2 1.3 1.4 1.5 2.1 2.2 2.3 2.4 2.5 2.6 3.1 3.2 3.3 3.4
Project X X X X X X X X X X X X X X X
Lab Exercise X X X X X                    
Test           X X X X X X X X X X

Assessment vs UEENEEH167A Elements & Performance Criteria

  UEENEEH167A Elements & Performance Criteria
Assessments 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 2.1 2.2 2.3 2.4 2.5 2.6 2.7 3.1 3.2 3.3 3.4
Project X X X X X X X X X X X X X X X X X X X
Lab Exercise X X X X X X X X                      
Test                 X X X X X X X X X X X

Assessment vs UEENEEH168A Elements & Performance Criteria

  UEENEEH168A Elements & Performance Criteria
Assessments 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 2.1 2.2 2.3 2.4 2.5 2.6 3.1 3.2 3.3 3.4 3.5
Project X X X X X X X X X X X X X X X X X X X X X
Lab Exercise X X X X X X X X X X                      
Test                     X X X X X X X X X X X

Assessment vs Engineers Australia Stage 1 Competencies

  Engineers Australia Stage 1 Competencies
Assessments EA1.1 EA1.2 EA1.3 EA1.4 EA1.5 EA1.6 EA2.1 EA2.2 EA2.3 EA2.4 EA3.1 EA3.2 EA3.3 EA3.4 EA3.5 EA3.6
Project X X X X X X X X X X X X X X X X
Lab Exercise X X X X X X           X X X X X
Test X X X X X X X X X X            
ALL ASSESSMENTS UEENEEH182A  3
ALL ASSESSMENTS UEENEEH167A  3  3  3
ALL ASSESSMENTS UEENEEH168A  3  3  3  3  2  2  3  3
0 (Blank) Graduate attribute is not assessed
1 Graduate attribute is assessed in at least one, but less than one-third, of the Element
2 Graduate attribute is assessed in at least one third, but less than two-third, of the Element
3 Graduate attribute is assessed in more than two-thirds of the Element
   

Other Information

Credit Transfer and/or Recognition of Prior Learning (RPL):

You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
 

  • Relevant
  • Current
  • Satisfies the learning/competency outcomes of the course


Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.

Study and Learning Support:

Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:
 

  • Assignment writing, thesis writing and study skills advice
  • Maths and science developmental support and advice 
  • English language development

Please refer to http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and Learning Support.

Disability Liaison Unit:

If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.

Please refer to http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.

Late Submission:

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for seven calendar days or less (from the original due date) and have valid reasons, you must complete an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.

The application must be lodged no later than one working day before the official due date. You will be notified within no more than two working days of the date of lodgement as to whether the extension has been granted.

If you seek an Extension of Submittable Work for more than seven calendar days (from the original due date), you must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than two working days after the official due date.

Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.

Special Consideration:

Please refer tohttp://www.rmit.edu.au/students/specialconsideration to find more information about special consideration.

Plagiarism:

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the university.
Please refer to http://www.rmit.edu.au/academicintegrity to find more information about plagiarism.

Email Communication:

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

   

Course Overview: Access Course Overview