Course Title: Install roof components

Part B: Course Detail

Teaching Period: Term2 2015

Course Code: BUIL6300C

Course Title: Install roof components

School: 130T Vocational Engineering

Campus: City Campus

Program: C3312 - Certificate III in Plumbing

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vocengineering@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Program Manager - Warren James
Tel: +61 3 9925 4632
Email: warren.james@rmit.edu.au

Nominal Hours: 10

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

CPCPCM2043A Carry out WHS requirements
 

Course Description

This unit of competency specifies the outcomes required to select and install industrial type roofing components in roofs.

In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

CPCPRF3024A Install roof components

Element:

1. Prepare for work.

Performance Criteria:

1.1 Plans and specifications are obtained.
1.2 Work health and safety (WHS) and environmental requirements associated with selecting and installing industrial roof components are adhered to throughout the work.
1.3 Quality assurance requirements are identified and adhered to according to workplace requirements.
1.4 Tasks are planned and sequenced in conjunction with others involved in or affected by the work and statutory and regulatory authorities’ requirements.
1.5 Tools and equipment, including personal protective equipment, are selected and checked for serviceability.
1.6 Work area is prepared to support efficient selection and installation of industrial roof components.

Element:

2. Identify installation requirements.

Performance Criteria:

2.1 Industrial roof components are identified from plans and specifications and are compatible with adjacent materials and other relevant information.
2.2 Proposed sealant, fixing materials, and roofing and flashing materials are selected and checked for compliance with plans, specifications and relevant Australian standards.
2.3 Materials are identified, ordered and collected according to workplace procedures.
2.4 Materials and equipment are checked for compliance with docket and order form and for acceptable condition, and faults are reported.
2.5 Sustainability principles and concepts are observed when preparing for and undertaking work process.
2.6 Location of installation and opening size are identified from plans and manufacturer specifications.
2.7 Location is checked for obstructions that may affect the installation.

Element:

3. Install roof components.

Performance Criteria:

3.1 Where required, the industrial component is erected to comply with manufacturer recommendations.
3.2 Industrial roof component is set out to comply with plans, specifications and site measurements.
3.3 Structural supports are installed to comply with plans and specifications.
3.4 Openings are prepared to comply with plans, specifications and relevant Australian standards.
3.5 Mullions, frames, baffles, sheeting and louvre blades are located and fixed to comply with manufacturer recommendations.
3.6 Component is installed to comply with plans, specifications and manufacturer requirements.
3.7 Flashing and waterproofing, including proprietary or purpose-made flashing, are installed to comply with relevant Australian standards, plans, specifications, manufacturer recommendations and regulatory authorities' requirements.
3.8 Installation is performance tested and remedied as required.

Element:

4. Clean up.

Performance Criteria:

4.1 Work area is cleared and materials disposed of, reused or recycled according to legislation, regulations, codes of practice and job specification.
4.2 Tools and equipment are cleaned, checked, maintained and stored according to manufacturer recommendations and workplace procedures.
4.3 Documentation is completed according to workplace requirements.


Learning Outcomes


Refer to Elements


Details of Learning Activities

Learning activities include in class workbook activities and researching industry practices and standards. This may include online learning activities. Students are expected to undertake design, size and documentation to relevant industry standards to include sustainability and WHS principles.


Teaching Schedule

Session                Number

Topic       

                                   

Learning

Activities/Resource                                                                

Elements/Performance

Criteria                          

Assessments                                                       
   1

Theory of roof components installation
 


Theory lesson & SWMS

1.1 /1.2/1.3/1.4

Underpinning questions
SWMS
 

1 con’tPractical of roof components installation

 Fit off and Install roof components

Continuous roof ridge ventilator

1.1/ 4.3 Practical installation
2Practical of roof components installationFit off and Install roof components

Round roof ventilator

 1.1/ 4.3 Practical installation
     


Learning Resources

Prescribed Texts

There are no prescribed textbooks. Class notes (workbook) will be provided to all students enrolled in this unit.
References


References


Other Resources


Overview of Assessment

Students must pass each of the following assessment tasks to demonstrate competent. 

Assessment

Task 1

Workbook Activities

Task 2

Practical assessment 1

Task 3

Practical assessment 2


These tasks assesses the following Course Learning Outcomes (CLOs):

Assessment Mapping Matrix

 

Element/

Performance Criteria Covered

Task 1

Task 2

Task 3

1.1

X

X

 

1.2

X

X

 

1.3

X

X

 

1.4

X

X

 

1.5

X

X

 

1.6

X

X

 

2.1

X

X

 

2.2

X

X

 

2.3

X

X

 

2.4

X

X

 

2.5

X

X

 

2.6

X

X

 

2.7

X

X

 

3.1

X

 

X

3.2

X

 

X

3.3

X

 

X

3.4

X

 

X

3.5

X

 

X

3.6

X

 

X

3.7

X

 

X

3.8

X

 

X

4.1

X

X

X

4.2

X

X

X

4.3

X

X

X

To be deemed competent you must demonstrate an understanding of all aspects required of the competency. Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks.


Assessment Tasks

Students are required to complete three different types of assessment tasks
1. Workbook activities as evidence of classroom participation ( 20% weighing)
2. Theory underpinning questions & SWMS  assessment for Fit off and Install roof components ( 40% weighing)
3. Practical assessment for Continuous roof ridge ventilator Round roof ventilator( 40% weighing).

To successfully complete this unit, a student needs to be deemed competent (CA grade) in all three assessment tasks.
Grading Criteria:
NYC - Not yet competent
CA - Competence Achieved
DNS - Did not submit assessment


Assessment Matrix

Assessment TaskElement/ PCPercentage Weighting

Session 1

Workbook Activities

Element 1-4 / 1.1 – 4.320%

Session 2

Practical assessment

Element 1-4 / 1.1 – 4.340%
 Element 1-4 / 1.1 – 4.340%

Other Information

Academic Misconduct

Students are reminded that cheating, whether by fabrication, falsification of data, or plagiarism, is an offence subject to University disciplinary procedures. Plagiarism in oral or written presentations is the presentation of the work, idea or creation of another person, without appropriate referencing, as though it is one’s own. Plagiarism is not acceptable.
The use of another person’s work or ideas must be acknowledged. Failure to do so may result in charges of academic misconduct which carry a range of penalties including cancellation of results and exclusion from your course.
Students are responsible for ensuring that their work is kept in a secure place. It is also a disciplinary offence for students to allow their work to be plagiarized by another student.
Students should be aware of their rights and responsibilities regarding the use of copyright material. It is strongly recommended that students refer to the Guidelines for Students at the RMIT University Homepage
 

Course Overview: Access Course Overview