Course Title: Contribute to health and safety of self and others
Part B: Course Detail
Teaching Period: Term2 2017
Course Code: OHTH5873C
Course Title: Contribute to health and safety of self and others
School: 650T Vocational Business Education
Campus: City Campus
Program: C4369 - Certificate IV in Banking Services
Course Contact: Callie Harvey
Course Contact Phone: +61 3 9925 5772
Course Contact Email: firstname.lastname@example.org
Name and Contact Details of All Other Relevant Staff
Arie Herrnstadt 9925 5897
Nominal Hours: 20
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
This unit describes the skills and knowledge required to work in a manner that is healthy and safe in relation to self and others and to respond to emergency incidents. It covers following work health and safety (WHS) and emergency procedures and instructions, implementing WHS requirements and participating in WHS consultative processes.
It applies to individuals who require a basic knowledge of WHS to carry out work in a defined context under direct supervision or with some individual responsibility, in a range of industry and workplace contexts.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title:
BSBWHS201 Contribute to health and safety of self and others
1. Work safely
1.1 Follow provided safety procedures and instructions when working
1.2 Carry out pre start systems and equipment checks according to workplace procedures
1.3 Follow workplace procedures for responding to emergency incidents
2. Implement work safety requirements
2.1 Identify designated persons to whom queries and concerns about safety in the workplace should be directed
2.2 Identify existing and potential hazards in the workplace, report them to designated persons and record them according to workplace procedures
2.3 Identify and implement WHS procedures and work instructions
2.4 Identify and report emergency incidents and injuries to designated persons according to workplace procedures
2.5 Identify WHS duty holders and their duties for own work area
3. Participate in WHS consultative processes
3.1 Contribute to workplace meetings, inspections and other WHS consultative activities
3.2 Raise WHS issues with designated persons according to organisational procedures
3.3 Take actions to eliminate workplace hazards and reduce risks
Details of Learning Activities
A range of learning activities are planned for this course including self-paced and collaborative classroom based activities.
The self-paced activities will be delivered thought various technology platforms and include your contribution to web based research and discussion threads, portfolios of evidence quizzes and interactive sessions.
The collaborative classroom based activities will include group discussion, group problem solving activities and opportunities to practice your skills in a simulated/real workplace environment.
The delivery for this course is a two-hour class every alternative week, commencing week 1 and two hours of online structured learning for the week that there is no face to face delivery. The online learning will consist of reading material within the learning hub and completing scheduled exercises.
You are expected to participate and contribute in all scheduled activities.
This cluster is delivered face to face for two-hours in weeks 1,3,5,7,9,11,13 & 15 and two hours of online structured learning for the weeks that there is no face to face delivery for a total of 16 weeks.
The teaching schedule for this course is attached to this document (Part B) but please note that it is subject to change.
This course is co-delivered with OFFC 5313C - Use Business technology . You must successfully complete all three assessments for both courses to be deemed competent in this course.
The nominal hours associated with this are a guide only and represent the total teaching time and student effort required to successfully complete the course. This may include not only scheduled classes but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities including the self paced activities.
Overview of Assessment
In order to achieve competency in this unit, you must provide:
Evidence of the ability to:
- follow all relevant procedures and instructions relating to work health and safety (WHS) and emergency incidents
- identify and report hazards to designated personnel
- contribute to WHS consultative processes.
To complete the unit requirements safely and effectively, you must:
- explain workplace safety procedures and instructions including:
- checking systems and equipment
- conducting routine work operations
- requirements for personal protective equipment (PPE)
- how to report incidents and injuries
- explain emergency procedures including those for fires and incidents
- define the meaning of commonly used hazard signs and safety symbols
- summarise the duty holder responsibilities, as specified in WHS Acts, regulations and codes of practice, of:
- self and fellow workers
- persons conducting businesses or undertakings (PCBUs)
- others in the workplace
- explain the difference between hazards and risks
- describe typical WHS hazards that may be present in the workplace, the harm they can cause and how this harm occurs
- outline the process of hazard identification and risk reduction.
Assessment must be conducted in a safe environment where evidence gathered demonstrates consistent performance of typical activities experienced by individuals carrying out work health and safety duties in the workplace and include access to:
- relevant organisational policies, standard operating procedures and work instructions
- relevant Acts, regulations, codes of practice
- workplace tools, equipment and resources
- personal protective equipment appropriate to the role and work area
You are advised that you are likely to be asked to personally demonstrate your assessment work to your teacher to ensure that the relevant competency standards are being met.
Feedback will be provided throughout the semester in class and/or online discussions. You are encouraged to ask and answer questions during class time and online sessions so that you can obtain feedback on your understanding of the concepts and issues being discussed. Finally, you can email or arrange an appointment with your teacher to gain more feedback on your progress.
You should take note of all feedback received and use this information to improve your learning outcomes and final performance in the course.
This course is co-delivered with the following competency:
BSBWHS201 - Contribute to health and safety of self and others
You are required to complete three tasks for this course. You must successfully complete all three tasks to be deemed competent in this course.
Critical aspects of assessment are described above in the performance evidence for this course.
1. OHS and Technology Quiz (Week 7)
This assessment task will assess knowledge of workplace health and safety requirements, selecting and using software and processing and organising data.
2. Portfolio (Week 10)
This assessment will assess knowledge of WHS/OHS and Business Technology topics. Students have to submit activities each week (during Weeks 1-10) as indicated on the weekly schedule.
3. OHS & Technology Assignment (Week 14)
This assessment task consists of Part A and Part B
Part A will assess ability to apply knowledge of OHS policies and procedures, emergency and reporting procedures, legislative requirements, risk and hazard identification & control, and participate in WHS/OHS consultative processes.
Part B - students required to respond to a series of questions and scenarios are focused on technology and software requirements in the workplace.
Final grades are only determined after all assessment tasks are successfully completed. The assessment matrix for the the final grade is available on Blackboard in the Assessments Folder.
- Ensure that you submit assessments on or before the due date.
- Always retain a copy of your assessment tasks. (hard copy and soft copy)
- When you submit work for assessment at RMIT University you need to use a cover sheet that includes a declaration and statement of authorship. You must complete, sign and submit a cover sheet with all work you submit for assessment, whether individual or group work. On the cover sheet you declare that the work you are presenting for assessment is your own work. An assignment cover sheet for submission of each assessment task is available on blackboard.
- Each page of your assessment should include footer with your name, student number, the title of the assessment, unit code and title and page numbers. For example, Callie Harvey, 324567, Task 2, OHTH5873C & OFFC5313C Health Safety & Office Tech, Page 1 of 4.
Late Submission Procedures
You are required to submit assessment items and/or ensure performance based assessment is completed by the due dates.
If you are prevented from submitting an assessment item on time, by circumstances outside your control, you may apply in advance to your teacher for an extension to the due date of up to seven calendar days.
More Information: http://www.rmit.edu.au/students/assessment/extension
Form to use: http://mams.rmit.edu.au/seca86tti4g4z.pdf
Where an extension of greater than seven days is needed, you must apply for special consideration. Applications for special consideration must be submitted no later than two working days after the assessment task deadline or scheduled examination.
More Information:http://www.rmit.edu.au/browse;ID=g43abm17hc9w (unresolved)
Form to use:http://mams.rmit.edu.au/8a5dgcaqvaes1.pdf
Resubmissions (VET Programs):
If you are found to be unsuccessful in a particular Course Assessment Task (or you do not submit/attend) you will be allowed one resubmission. Your teacher will provide feedback regarding what you need to do to improve and will set a new deadline for the resubmission.
If you are still not meeting the assessment requirements you must apply to your Program Manager in writing outlining the steps you will take to demonstrate competence in your course. Your submission will be considered by the Program Team and you will be advised of the outcome as soon as possible.
Grading & re-submissions
Re-submissions do not contribute to your overall grade for the course.
Adjustments to Assessment
In certain circumstances students may be eligible for an assessment adjustment. For more information about the circumstances under which the assessment arrangements might be granted please access the following website:
Marking Guide (Competency):
You must demonstrate that you have all the required skills/knowledge/elements in the unit of competency you are studying.
You will receive feedback on each assessment task that will inform you about your progress and how well you are performing.
Marking Guide (Grading)
After achieving competency we then grade your performance in the unit and you will achieve one of the following grades:
Final Grades table:
CHD Competent with High Distinction
CDI Competent with Distinction
CC Competent with Credit
CAG Competency Achieved - Graded
CA Competency Achieved - Not Graded
NYC Not Yet Competent
DNS Did Not Submit for assessment
Course Overview: Access Course Overview