Course Title: Solve problems in d.c. circuits

Part B: Course Detail

Teaching Period: Term1 2014

Course Code: EEET7020C

Course Title: Solve problems in d.c. circuits

School: 130T Vocational Engineering

Campus: City Campus

Program: C6122 - Advanced Diploma of Electronics and Communications Engineering

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email:

Name and Contact Details of All Other Relevant Staff

Kemps Cheng
Phone: +61 3 9925 4691

Ted Bown
Phone: +61 3 9925 4694

Nominal Hours: 80

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites


Course Description

This unit covers determining correct operation of single source d.c. series, parallel and series-parallel circuits and providing solutions as they apply to various electrotechnology work functions. It encompasses working safely, problem solving procedures, including the use of voltage, current and resistance measuring devices, providing solutions derived from measurements and calculations to predictable problems in single and multiple path circuits.

National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

UEENEEE104A Solve problems in d.c. circuits


1. Prepare to work on d.c. electrical circuits.


2. Solve d.c. circuit problems.


3. Complete work and document problem solving activities.

Learning Outcomes

Refer to Elements

Details of Learning Activities

You will involve in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates.

  • Tutorial
  • Practicals
  • Lecture

Engineer Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:

EA1.1. Comprehensive, theory based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the engineering
EA1.2. Conceptual understanding of the, mathematics, numerical analysis, statistics, and computer and information sciences which underpin the engineering discipline.
EA1.3. In-depth understanding of specialist bodies of knowledge within the engineering discipline.
EA1.4. Discernment of knowledge development and research directions within the engineering discipline.
EA1.5. Knowledge of contextual factors impacting the engineering discipline.
EA1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the specific discipline.
EA2.1. Application of established engineering methods to complex engineering problem solving.
EA2.2. Fluent application of engineering techniques, tools and resources.
EA2.3. Application of systematic engineering synthesis and design processes.
EA2.4. Application of systematic approaches to the conduct and management of engineering projects.
EA3.1. Ethical conduct and professional accountability.
EA3.2. Effective oral and written communication in professional and lay domains.
EA3.3. Creative, innovative and pro-active demeanour.
EA3.4. Professional use and management of information.
EA3.5. Orderly management of self and professional conduct.
EA3.6. Effective team membership and team leadership.

Engineers Australia Stage 1 Competencies are mapped with competency UEENEEE104A in the Assessment Matrix.

Teaching Schedule

The proposed teaching schedule for this competency is detailed below:


WeekTopics DeliveredElements/Performance Criteria
1Introduction to course, course guide, assessments, topics breakdown, resources, equipment (in the lab) & OHS issues.
Basic electrical concepts
Electro technology industry.
Production of electricity.
Transmission and distribution systems of electricity. Utilisation of electricity by the various loads
Basic calculations involving quantity of electricity, velocity and speed with relationship to the generation and transportation of electricity.
E104A: 1.1, 1.2

 Basic electrical circuit
Symbols used to represent an electrical energy source, a load, a switch and a circuit protection device in basic d.c. single path circuit
Purpose of each component in the circuit.
Effects of an open-circuit, a closed-circuit and a short-circuit

Tutorial # 1

E104A: 1.1 - 1.6, 2.1,2.2, 2.5, 2.6, 3.1, 3.2, 3.4
3Ohm’s Law
Relationship between voltage, current and resistance from measured values in a simple circuit.
Determining voltage, current and resistance in a circuit given any two of these quantities.
Graphical relationships of voltage, current and resistance
Tutorial # 2


E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4

 Electrical power
Relationship between force, power, work and energy
Power dissipated in circuit from voltage, current and resistance values.
Power ratings of devices
Measurement electrical power in a d.c. circuit.
Effects of power rating of various resistors
Lab # 1 (2.5%)

E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
5 Effects of electrical current
Effects of current.
The fundamental principles (listed in AS/NZS 3000) for protection against the effects of current.
Basic principles by which electric current can result in the production of heat; light; magnetic fields; and a chemical reaction.
Typical uses of the effects of current.
Tutorial # 3
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
6 EMF sources energy sources and conversion electrical energy
Basic principles of producing a emf from the interaction of a moving conductor in a magnetic field, from the heating of one junction of a thermocouple, by the application of sun light falling on the surface of photovoltaic cells, and when a mechanical force is applied to a crystal (piezo electric effect).
Principles of producing a electrical current from primary, secondary and fuel cells.
Input, output, efficiency or losses of electrical systems and machines
Effect of losses in electrical wiring and machines.
Principle of conservation of energy
Lab # 2 (2.5%)
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
7 Resistors
Features, identification, types and applications of fixed and variable resistors.
Power ratings of a resistor.
Power loss (heat) occurring in a conductor.
Use the colour code table to identify resistors and confirm the value by measurement.
Specifying a resistor for a particular application
Tutorial # 4
Assignment (10%)
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
8 Series circuits
Circuit diagram of a single-source d.c. ‘series’ circuit.
Applications and characteristics of ‘series’ circuits used in the Electro technology industry.
KVL and simple voltage divider networks.
Effect of an open-circuit on a series connected circuit
Lab # 3 (2.5%)
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
9Parallel circuits
Schematic diagram of a single-source d.c. ‘parallel’ circuit.
Applications and characteristics of ‘parallel’ circuits used in the Electro technology industry.
KCL and simple current divider rule and power dissipation.
Output current and voltage levels of connecting cells in parallel.
Written Test (20%)
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
Series/parallel circuits
Schematic diagram of a single-source d.c. ‘series/parallel’ circuit.
Applications and characteristics of ‘series/parallel’ circuits used in the Electrotechnology industry.
Relationship between voltages, currents and resistances in a bridge network.
Calculation of the total resistance, the voltage, current and power dissipated from measured values of any two of these quantities of a ‘series/parallel’ circuit.
Lab # 4 (2.5%)
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
11Factors affecting resistance
Factors affect the resistance of a conductor (type of material, length, cross-sectional area and temperature)
Effects of resistance on the current-carrying capacity and voltage drop in cables.
Calculation of the resistance.
Lab # 5 (2.5%)


E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
12 Effects of meters in a circuit
Operating characteristics of analogue and digital meters, range, loading effect and accuracy for a given application.
Connection of instruments into a circuit to measure voltage, current and resistance, reading analogue scales and digital readouts in measuring voltage, current and resistance
Lab # 6 (2.5%)
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
13Resistance measurement
Identification of instruments used in the field to measure resistance.
The purpose of an Insulation Resistance (IR) Tester calibration, storing and checking.
Zero ohms adjustment, battery check function, scale and connecting leads).
Reasons why the supply must be isolated prior to using the IR tester.
The continuity test, insulation resistance test used in an electrical installation and AS/NZS3000 Wiring Rules requirements.
The voltage ranges of an IR tester and where each range may be used. e.g. 250 V d.c, 500 V d.c and 1000 V d.c
Lab # 7 (2.5%)
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
14Definition of capacitance, how a capacitor is charged.
Units by which capacitance is measured.
Capacitance voltage and charge.
Behaviour of an RC series d.c. circuit
Lab # 8 (2.5%)
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
Hazards and safety control. Factors which determine the capacitance of a capacitor in all circuits to some extent.
Capacitors types
Identifying capacitors values
Common faults in capacitors
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
16Capacitors in Series and Parallel
Capacitors connected in parallel calculating their equivalent capacitance.
Effects on the total capacitance of capacitors connected in series
Assignment due (10 %)
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4
17-18Final written exam 

Learning Resources

Prescribed Texts

Introductory Circuit Analysis
By: Robert L. Boylestad ISBN 0-13-173044-4


Other Resources

Resource materials will be available on S:\C6122\EEET7020C & my RMIT>Studies>EEET7020C

Overview of Assessment

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:

Assessment 1: Practical/Laboratories
Weighting towards final grade (%): 20

Assessment 2: Assignment
Weighting towards final grade (%): 10

Assessment 3: Practical Test 
Weighting towards final grade (%): 20

Assessment 4: Final Written Test
Weighting towards final grade (%): 50

These tasks assesses the following Course Learning Outcomes (CLOs) :

Assessment Mapping Matrix

Element/Performance Criteria CoveredAssignmentLabPractical TestFinal Written Test
2.1x xxx
2.2x xxx
2.3x xxx
2.4x xxx
2.5 xx x x
2.6 xx x
3.1 xx x x
3.2 xx x x
3.3 xx x x
3.4 xx x


Assessment Tasks

  • Close book test, 20 %
  • Assignment 10%
  • Laboratory exercise 20 %
  • Written Exam 50%

This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:
80 - 100: CHD - Competent with High Distinction
70 - 79: CDI - Competent with Distinction
60 - 69: CC - Competent with Credit
50 - 59: CAG - Competency Achieved - Graded
0 - 49: NYC - Not Yet Competent
DNS - Did Not Submit for Assessment

Assessment Matrix

Assessment vs UEENEEE104A Elements & Performance Criteria

 UEENEEE104A Elements & Performance Criteria
Assignmentxxxxxx x xx      
Lab Workxxxxxx     x x x x x x
ALL ASSESSMENTSxxxxxxxxxxxxxxxx

 Assessment vs Engineers Australia Stage 1 Competencies

Engineers Australia Stage 1 Competencies
Assignment  X X XXXXXXXXXX
Lab WorkXXXXXX X      X 
Test    X XX   X    

All Assessments

0 (Blank)Graduate attribute is not assessed.
1Graduate attribute is assessed in at least one, but less than one-third, of the Elements
2Graduate attribute is assessed in at least one third, but less than two-third, of the Elements
3Graduate attribute is assessed in more than two-third, of the Elements

Other Information

  • Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course related consultation. Students are required to self-study the learning materials and complete the assignmed out of class activities for the scheduled non-teaching hours. The estimated time is 15 hours outside the class time.

Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:

Assignment writing, thesis writing and study skills advice
Maths and science developmental support and advice
English language development

Please Refer to find more information about Study and learning Support

Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer to find more information about services offered by Disability Liaison Unit

Late submission:

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.

Special consideration:

Please Refer to find more information about special consideration


Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: to find more information about plagiarism.

Email Communication:

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

Course Overview: Access Course Overview