Course Title: Provide Gate Array solutions for complex electronics systems
Part B: Course Detail
Teaching Period: Term1 2018
Course Code: EEET7063C
Course Title: Provide Gate Array solutions for complex electronics systems
School: 174T School of VE Engineering, Health & Science
Campus: City Campus
Program: C6122 - Advanced Diploma of Electronics and Communications Engineering
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: vocengineering@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Sukhvir Judge
Phone: +613 9925 4470
email: sukhvir.judge@rmit.edu.au
Nominal Hours: 60
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
UEENEEE101A
Course Description
This unit covers design and development of electronic systems using gate array technology. It encompasses working safely, following design briefs and applying knowledge of gate arrays and interpreting device specifications, constructing prototypes, using appropriate development software, applying programming techniques, testing developed system prototype operation, verifying compliance of the design against the final brief and documenting design and development work.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
UEENEEH189A Provide Gate Array solutions for complex electronics systems |
Element: |
1. Prepare to design and develop advanced gate array systems. |
Performance Criteria: |
1.1 OHS procedures for a given work area are obtained and understood. |
Element: |
2. Design and develop advanced gate array systems. |
Performance Criteria: |
2.1 OHS risk control measures and procedures for carrying out the work are followed. |
Element: |
3. Obtain approval for the design and development of advanced gate array systems and document. |
Performance Criteria: |
3.1 Gate array system design is presented and explained to client representative and/or other relevant person(s). |
Learning Outcomes
Refer to Elements
Details of Learning Activities
You will be involved in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates:
• Lectures
• Tutorials
• Practical laboratory tests
• Reports
• Guest speakers
• Site visit(s)
Engineers Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:
EA 1. Knowledge and Skill Base
EA1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.
EA 2. Engineering Application Ability
EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.
EA 3. Professional and Personal Attributes
EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.
Engineers Australia Stage 1 Competencies are mapped with competency UEENEEH189A in the Assessment Matrix.
Teaching Schedule
Teaching Schedule
The proposed teaching schedule for this competency is detailed below:
Week | Topics Delivered | Elements/Performance Criteria |
1 | Introduction to course, course guide, assessment, topics breakdown, resources, OHS procedures etc | UEENEEH189A:1.1,1.2,1.4,1.6, |
2 | Introduction to PLDs | UEENEEH189A:1.3,1.6,2.1,2.2 |
3 | Comparative study of CPLDs and FPGAs | UEENEEH189A:2.1,2.2,2.3 |
4 |
Selection of devices and other resources for implementation of FPGA design based on specifications Introduction to hardware description language |
UEENEEH189A:1.4,1.5,1.6,2,1,2,2,2,3 |
5 |
Introduction to hardware description language Practical Test |
UEENEEH189A:1.3,1.4,1.5,1.6,2.1,2.2,2.3 |
6 | Introduction to hardware description language | UEENEEH189A:1.1,1.2,1.3,1.4,1.5,1.6,2.1,2.2,2.3,2.4 |
7 | Introduction to hardware description language | UEENEEH189A: 1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,2.6 |
8 | Creating designs using CAD tools | UEENEEH189A: 2.1,2.2,2.3,2.4,2.5,2.6,2.7,2.8 |
9 |
Creating instants of components and interconnecting the design using HDL Timing simulations, Analysis and Hazards |
UEENEEH189A: 2.1,2.2,2.3,2.4,2.5,2.6,2.7,2.8 |
10 | Implementing designs in FPGAs | UEENEEH189A: 2.1,2.2,2.3,2.4,2.5,2.6 |
11 | Assessment for Practical Assignment | UEENEEH189A: 1.4,1.5,1.6,2.1,2.2,2.3,2.4,2.5,2.6,2.7,2.8 |
12 | Constructing FPGA based prototypes | UEENEEH189A:12.1,2.2,2.3,2.4,2.5,2.6,2.7,2.8 |
13 | Testing FPGA based prototypes |
UEENEEH189A: 2.1,2.2,2.3,2.4,2.5,2.6,2.7,2.8,3.1,3.2 |
14 | Student project | UEENEEH189A:1.1,1.2,1.3,1.4,1.5,1.6, 2.1,2.2,2.3,2.4,2.5,2.6,2.7,2.8,3.1,3.2,3.3,3.4 |
15 | Student project | UEENEEH189A:1.1,1.2,1.3,1.4,1.5,1.6, 2.1,2.2,2.3,2.4,2.5,2.6,2.7,2.8,3.1,3.2,3.3,3.4 |
16 | Student project Task 2: project + report -50% |
UEENEEH189A:1.1,1.2,1.3,1.4,1.5,1.6, 2.1,2.2,2.3,2.4,2.5,2.6,2.7,2.8,3.1,3.2,3.3,3 |
17 | Project Assessment | UEENEEH189A:1.1,1.2,1.3,1.4,1.5,1.6, 2.1,2.2,2.3,2.4,2.5,2.6,2.7,2.8,3.1,3.2,3.3,3.4 |
18 | Project Assessment | UEENEEH189A:1.1,1.2,1.3,1.4,1.5,1.6, 2.1,2.2,2.3,2.4,2.5,2.6,2.7,2.8,3.1,3.2,3.3,3.4 |
Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is minimum 6 hours outside the class time.
Learning Resources
Prescribed Texts
Title: Digital design and verilog hdl Fundamentals |
References
Other Resources
Resource materials will be available on the Canvas
Overview of Assessment
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:
Assessment 1: Practical Test
Weighting towards final grade (%): 20
Assessment 2: Practical Assignment
Weighting towards final grade (%): 30
Assessment 3: Project and Project Report
Weighting towards final grade for Project (%): 50
These tasks assesses the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Element/Performance Criteria Covered | Practical test | Practical Assignment | Project & Project Report |
1.1 | x | x | |
1.2 | x | x | |
1.3 | x | x | x |
1.4 | x | x | x |
1.5 | x | x | |
1.6 | x | x | x |
2.1 | x | x | x |
2.2 | x | x | x |
2.3 | x | x | |
2.4 | x | x | |
2.5 | x | x | |
2.6 | x | x | |
2.7 | x | x | |
2.8 | x | x | |
3.1 | x | x | |
3.2 | x | x | |
3.3 | x | x | |
3.4 | x | x |
Assessment Tasks
- Practical Test, 20% - Week 5
- Practical Assignment, 30% - Week 11
- Project, 50% - Week 17-18
This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:
80 - 100: CHD - Competent with High Distinction
70 - 79: CDI - Competent with Distinction
60 - 69: CC - Competent with Credit
50 - 59: CAG - Competency Achieved - Graded
0 - 49: NYC - Not Yet Competent
DNS - Did Not Submit for Assessment.
Assessment Matrix
Assessment vs UEENEEH189A Elements & Performance Criteria
UEENEEH189A Elements & Performance Criteria | ||||||||||||||||||
Assessments | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 2.7 | 2.8 | 3.1 | 3.2 | 3.3 | 3.4 |
Practical test | x | x | x | x | x | |||||||||||||
Practical Assignment | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
Project | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
Assessment vs Engineers Australia Stage 1 Competencies
Engineers Australia Stage 1 Competencies | ||||||||||||||||
Assessments | EA1.1 | EA1.2 | EA1.3 | EA1.4 | EA1.5 | EA1.6 | EA2.1 | EA2.2 | EA2.3 | EA2.4 | EA3.1 | EA3.2 | EA3.3 | EA3.4 | EA3.5 | EA3.6 |
Practical Test | x | x | x | x | x | x | ||||||||||
Practical Assignment | x | x | x | x | x | x | x |
x | x | x | x | |||||
Project | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | |
All Assessments UEENEEH189A | 2 | 3 | 2 | 0 | 2 | 1 | 3 | 3 | 2 | 1 | 1 | 2 | 1 | 1 | 1 | 0 |
0 (Blank) | Graduate attribute is not assessed | |||||||||||||||
1 | Graduate attribute is assessed in at least one, but less than one-third, of the Element | |||||||||||||||
2 | Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element | |||||||||||||||
3 | Graduate attribute is assessed in more than two-thirds of the Element |
Other Information
Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
- Relevant
- Current
- Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:
- assignment writing, thesis writing and study skills advice
- maths and science developmental support and advice
- English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Equitable Learning Services (ELS):
If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).
Late submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special consideration:
Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Other Information:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview