Course Title: Install LPG storage of aggregate storage capacity up to 500 litres

Part B: Course Detail

Teaching Period: Term1 2015

Course Code: BUIL6328C

Course Title: Install LPG storage of aggregate storage capacity up to 500 litres

School: 130T Vocational Engineering

Campus: City Campus

Program: C3312 - Certificate III in Plumbing

Course Contact : Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email:engineering-tafe@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Program Manager - Warren James
Tel: +61 3 9925 4468
Email: warren.james@rmit.edu.au

Nominal Hours: 22

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

CPCPCM2043A Carry out WHS requirements

Course Description

This unit of competency specifies the outcomes required to select, locate, install and test liquefied petroleum gas (LPG) storage facilities with a storage capacity of up to 500 litres; install either single or multiple cylinders; and test associated piping systems.
The storage is connected to consumer piping systems with operating pressures not exceeding 200kPa.
 


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

CPCPGS3059A Install LPG storage of aggregate storage capacity up to 500 litres

Element:

1 Identify LPG storage requirements.

2 Prepare for installation.

3 Install and test LPG storage system.

4 Clean up.

Performance Criteria:

1.1Design, drawings, specifications and any special instructions are obtained.
1.2Work health and safety (WHS) and environmental requirements associated with the installation of LPG storage facilities are adhered to throughout the work.
1.3Quality assurance requirements for company operations are identified and adhered to.
1.4Gas load and design requirements are determined from plans, specifications, and job drawing or workplace instructions.
1.5Storage capacity is checked for compliance with regulatory authority and installation requirements.
1.6Type of storage is determined according to job and installation requirements.
1.7Cylinder and type of system (one or two-stage) are selected according to standards, job and installation requirements.
1.8Appropriate regulators are determined to meet capacity and load of the system according to installation requirements.
1.9Appropriateness of selected location to provide the required service is established in compliance with standards and installation requirements.
1.10Quantity of materials required is calculated from design, drawings and specifications in compliance with installation requirements.
2.1Materials and equipment are ordered and checked for compliance with docket and order form, and for acceptable condition.
2.2Appropriate tools and equipment for storage facility installation, including personal protective equipment, are identified, selected and checked for serviceability.
2.3Appropriate testing apparatus is selected.
2.4Work is planned in conjunction with others involved in or affected by the work.
2.5Work area and materials are prepared to support efficient installation of the system.
3.1Cylinder supports and base, piping, fittings and components are selected in compliance with standards and installation requirements.
3.2Size and method of connection are selected in compliance with standards and installation requirements.
3.3Cylinder valve is purged according to standards.
3.4System from cylinder outlet is tested, purged and regulator adjusted to be gas-tight, in compliance with regulatory authority and installation requirements.
3.5Test data is recorded in format required by regulatory authority and installation requirements.
3.6Sustainability principles and concepts are applied to work process.
4.1Work area is cleared and materials disposed of, reused or recycled according to legislation, regulations, codes of practice and job specification.
4.2Tools and equipment are cleaned, checked, maintained and stored according to manufacturer recommendations and workplace procedures.
4.3Information is accessed and documentation completed according to installation requirements.


Learning Outcomes


Refer to elements


Details of Learning Activities

Learning activities include in class workbook activities and researching industry practices and standards.
This may include online learning activities.
Students are expected to undertake design, size and documentation to relevant industry standards to include sustainability and WHS principles.


Teaching Schedule

This unit is delivered over 2 sessions

 

Session Number                   Topic                                                        Learning Activities/Resources                            Elements/Performance Criteria                                                     Assessments                       
1Theory of  Install LPG storage  of aggregate storage capacity up to 500 litres                                                                                           

 Pearsons Gas Services chap 16 pgs 393-409. worksheets1,2,3.

Pearsons PPT chap 16.

introduce AS5601 2013

 1.1, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9. 
1 Cont’d Swms, Underpinnings, Formative tasks Students complete Swms, underpinning questions in student recording book. 1.2, 2.1, 2.2, 2.3, 2.4, 2.5. Assessment 1- Submit Swms, work book, underpinning questions.
2 Practical tasks- Install LPG storage of aggregate storage capacity up to 500 litres Students Install LPG storage of aggregate storage capacity up to 500 litres using tools and equipment in workshop. Student recording book required for self assessment. 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 4.1, 4.2, 4.3. Assessment 2- Practical installation of tasks 60, 61.


Learning Resources

Prescribed Texts


References


Other Resources

AS5601 2013


Overview of Assessment

Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course.


Assessment Tasks

Assessment 1- Submit workbook underpinning questions and completed Swms (weighting 30%)

Assessment 2- Practical installationof tasks 60, 61. (weighting 70%)

To successfully complete this unit, a student needs to be deemed competent (CA grade) in both assessment tasks.
Grading Criteria:
NYC - Not yet competent
CA - Competence Achieved
DNS - Did not submit assessment
 


Assessment Matrix

Assessment task                                                                                 

Element/PC                                     Percentage weighting       
Assessment 1- Written tasks from workbook                                                1.1, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9.30%
Assessment 2- Practical installation of 60, 61.1.2, 2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 4.1, 4.2, 4.3.70%

Other Information

Academic Misconduct
Students are reminded that cheating, whether by fabrication, falsification of data, or plagiarism, is an offence subject to University disciplinary procedures. Plagiarism in oral or written presentations is the presentation of the work, idea or creation of another person, without appropriate referencing, as though it is one’s own. Plagiarism is not acceptable.
The use of another person’s work or ideas must be acknowledged. Failure to do so may result in charges of academic misconduct which carry a range of penalties including cancellation of results and exclusion from your course.
Students are responsible for ensuring that their work is kept in a secure place. It is also a disciplinary offence for students to allow their work to be plagiarized by another student.
Students should be aware of their rights and responsibilities regarding the use of copyright material. It is strongly recommended that students refer to the Guidelines for Students at the RMIT University Homepage.

Course Overview: Access Course Overview