Course Title: Process reusable medical devices and equipment
Part B: Course Detail
Teaching Period: VE 2019
Class Number: All
Class Section: All
For flexible terms and optional semesters, a Part B course guide may have been published for the entire teaching period, or for the specific class number in which you are enrolled. If there is no Part B course guide published for your specific class number, please refer to the guide for the teaching period in which you are enrolled. Enrolment Online is the definitive source for details regarding your class enrolment.
Course Code: NURS5366C
Course Title: Process reusable medical devices and equipment
Important Information:
This unit is offered as Recognition of Prior Learning (RPL) and only applies to the students enrolled in the HLT45015 Certificate IV in Dental Assisting program, who do not have the current dental assisting qualification (HLT35015 Certificate III in Dental Assisting).
https://www.rmit.edu.au/students/student-essentials/enrolment/apply-for-credit
School: 174T School of VE Engineering, Health & Science
Campus: City Campus
Program: C4385 - Certificate IV in Dental Assisting
Course Contact: Ms. Suzanne Fatone
Course Contact Phone: +61 3 9341 1406
Course Contact Email: sue.fatone@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Program Manager:
Ms. Rachael Starr
9341 1420
Vocational Educator
Ms. Sandra Torbica
9341 1408
Nominal Hours: 30
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
None
Course Description
This unit describes the skills and knowledge required to clean, sterilise and package reusable medical devices and equipment.
This unit applies to workers in office based health practice settings such as general practitioner (GP) surgeries, dental practices and other environments where a limited range of sterilisation equipment may be available. They follow established procedures and work under general supervision.
The skills in this unit must be applied in accordance with Commonwealth and State/Territory legislation, Australian/New Zealand standards and industry codes of practice.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
HLTINF002 Process reusable medical devices and equipment |
Element: |
1. Prepare to clean used items |
Performance Criteria: |
1.1 Follow safe work practices and infection prevention and control in accordance with legislative and workplace guidelines 1.2 Sort reusable medical devices and safely dispose of single use devices 1.3 Segregate and dispose of waste according to organisation and legislative requirements 1.4 Disassemble reusable medical devices and equipment for cleaning and disinfection according to manufacturer’s instructions |
Element: |
2. Clean and dry used items |
Performance Criteria: |
2.1 Maintain work flow protocols in reprocessing area 2.2 Interpret safety data sheet (SDS) and select required cleaning products 2.3 Select cleaning processes based on manufacturer’s recommendations and evaluation of reusable medical devices construction and composition 2.4 Use cleaning methods that avoid the generation of aerosols 2.5 Make accurate calculations for the preparation of cleaning chemicals 2.6 Dry and inspect reusable medical devices for cleanliness and damage |
Element: |
3. Prepare and pack items for sterilisation |
Performance Criteria: |
3.1 Open and unlock reusable medical devices with hinges or ratchets 3.2 Prepare instrument trays in accordance with workplace protocols 3.3 Package or wrap reusable medical devices in a manner that prevents damage to delicate items 3.4 Use chemical indicator according to standards 3.5 Pack, secure and label sterile barrier systems (SBS) to comply with aseptic removal principles |
Element: |
4. Sterilise loads |
Performance Criteria: |
4.1 Interpret and apply manufacturer recommendations for cleaning and checking of steriliser and accessory equipment. 4.2 Correctly use the numerical and other features of the steriliser and operate in accordance with manufacturer 4.3 Assign cycle and batch control number and complete documentation. 4.4 Load steriliser to ensure sterilant contact and according to standards 4.5 Remove sterilised load immediately on completion of cycle 4.6 Follow criteria for release of processed items considering manual task risk factors |
Element: |
5. Comply with quality management requirements |
Performance Criteria: |
5.1 Interpret and adhere to operational monitoring and testing, performance qualification and maintenance of sterilisers and associated equipment 5.2 Comply with documentation requirements for sterilisation cycles, batch control and load release 5.3 Report and document all steriliser faults, malfunction and load non-conformance 5.4 Store documentation in accordance with organisation procedures |
Learning Outcomes
- Prepare to clean used items
- Clean and dry used items
- Prepare and pack items for sterilisation
- Sterilise loads
- Comply with quality management requirements
Details of Learning Activities
Students will be involved in the following learning activities to meet requirements for this competency:
- Face to Face classes
- Written classroom tasks
- Demonstration and classroom discussion
- Facilitator led practical clinical demonstration
- Group discussions
- Participation in group activities based on simulated workplace exercises
- Clinical practice, peer evaluation/feedback session/completion of practical worksheets
- Online learning via CANVAS
- Self-managed research to support completion of Study Guides.
- Students will be observed and assessed through their planned activities throughout the duration of the course
Teaching Schedule
As per Certificate IV Timetable, which is issued as a hard copy on Induction Day and is also located in Canvas.
Learning Resources
Prescribed Texts
Bird.D & Robinson.D - (2017) Modern Dental Assisting 12th Edition - Elsevier- |
9781437717297 |
References
Modern Dental Assisting Ed 12, Bird Robinson |
9780323430302 |
Other Resources
Students will be able to access course information and learning materials through CANVAS.
CANVAS is an online resource with the lesson plans for each unit. Within CANVAS are the session lessons plans, assessments, resources and other materials required for completion of each unit of competency.
Additional materials maybe provided in class and lists of relevant reference books, resources in the library and accessible Internet sites will be provided where possible. During the course, you will be directed to websites to enhance your knowledge and understanding of difficult concepts.
Overview of Assessment
This course is offered as part of the HLT45015 Certificate IV in Dental Assisting RPL process and the HLT45015:C4385 Existing Skills and Knowledge Inventory and HLT45015:C4385 RPL Guide is required to be completed.
Assessment Tasks
Assessment:Task 1 |
Simulated Practical Assessment 1 This is conducted on Day 4/Phase 3 at RMIT simulated dental teaching areas and student's knowledge and skills will be observed. Detailed information will be provided to students via canvas and during their class attendance. In order to proceed with this assessment task, student must wear appropriate clinical attire. Students will attempt this assessment under supervision of the assessor and they will be marked with either a S (Satisfactory) or NYS (Not Yet Satisfactory) according to the assessment guidelines and criteria outlined in the HLTINF002 Assessment Overview. All assessment criteria must be successfully completed in order to achieve a satisfactory result and students will receive verbal feedback on the day. |
Assessment:Task 2 |
Workplace Assessment
This is conducted after Phase 3. RMIT will contact the student and the Workplace Assessor for discussion and scheduling of the suitable time for this assessment. Student knowledge and skills will be observed in the workplace. Detailed information will be provided via Canvas and to students during their class attendance. Students will attempt the workplace assessments under supervision of the assessor and they will be marked with either a S (Satisfactory) or NYS (Not Yet Satisfactory) according to the assessment guidelines and criteria outlined in the HLTINF002 Assessment Overview. All assessment criteria must be successfully completed in order to achieve a satisfactory result. Student will receive verbal feedback on the assessments at the end of the workplace assessment. |
Assessment:Task 3 |
Simulated Practical Assessment 2 This is conducted at RMIT simulated dental teaching areas and student's knowledge and skills will be observed. Detailed information will be provided to students via Canvas and during their class attendance Phase 4 Day 3. Students will attempt this assessments under supervision of the assessor and they will be marked with either a S (Satisfactory) or NYS (Not Yet Satisfactory) according to the assessment guidelines and criteria outlined in the HLTINF002 Assessment Overview. All assessment criteria must be successfully completed in order to achieve a satisfactory result and students will receive verbal feedback on the day. |
Assessment:Task 4 |
Knowledge Assessment This is a written assignment which is issued on Day 3/Phase 4. It will require research and answering questions and you must complete all questions successfully to pass this assessment. This will be conducted at RMIT University on Day 3/Phase 4 during morning session. Students are allowed 3h to complete this task. Feedback to students will be provided via Grade Centre on CANVAS. Appointment can be arranged to review outcome. |
To be deemed competent you must demonstrate an understanding of all aspects required of the competency and will incorporate a variety of methods including knowledge and skill based tasks and activities. Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks and you will be asked to personally demonstrate to your teacher/assessor the practical skills gained during this course to the relevant industry standards.
Assessment activities will occur throughout this course and feedback will be provided at regular intervals.
You will need to obtain Satisfactory (S) in all assessment tasks before a final grade of CA (Competency Achieved) can occur.
Assessment Matrix
Elements/Performance Criteria Covered |
Assessment 1 |
Assessment 2 |
Assessment 3 |
Assessment 4 |
1.1 |
X |
X |
X |
X |
1.2 |
X |
X |
X |
|
1.3 |
|
X |
X |
|
1.4 |
X |
|
X |
|
2.1 |
X |
X |
X |
X |
2.2 |
|
|
|
X |
2.3 |
X |
X |
X |
X |
2.4 |
|
X |
|
X |
2.5 |
X |
|
X |
|
2.6 |
X |
|
|
|
3.1 |
X |
X |
|
|
3.2 |
X |
X |
|
|
3.3 |
|
|
X |
|
3.4 |
|
|
X |
X |
3.5 |
X |
X |
X |
|
4.1 |
X |
X |
|
|
4.2 |
X |
|
|
|
4.3 |
|
X |
X |
|
4.4 |
X |
X |
X |
X |
4.5 |
|
X |
|
|
4.6 |
|
X |
|
|
5.1 |
|
X |
|
X |
5.2 |
|
|
|
X |
5.3 |
|
|
|
X |
5.4 |
|
|
|
X |
Other Information
All RMIT email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Credit Transfer and/or Recognition of Prior Learning (RPL):
http://www.rmit.edu.au/students/enrolment/credit
Study and learning Support:
http://www.rmit.edu.au/studyandlearningcentre
Equitable Learning Services (ELS):
https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services
Late submission:
https://www.rmit.edu.au/students/student-essentials/forms/assessment-forms
Special consideration:
http://www.rmit.edu.au/students/specialconsideration
Plagiarism:
https://www.rmit.edu.au/students/student-essentials/rights-and-responsibilities/academic-integrity
Course Overview: Access Course Overview