Course Title: Perform table-based operations
Part B: Course Detail
Teaching Period: Term1 2021
Course Code: MANU7390C
Course Title: Perform table-based operations
School: 375T Vocational Design and Social Context
Campus: Brunswick Campus
Program: C4389 - Certificate IV in Custom-Made Footwear
Course Contact: Paul Castro Alvarez
Course Contact Phone: +61 3 99259234
Course Contact Email: paul.castro@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Andrew Robinson
Nominal Hours: 50
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
None
Course Description
The unit applies to the preparation and production of components using table-based operations, working to defined procedures and methods.
You will develop skills and knowledge as it relates to table-based operations. This applies to various aspects of footwear production processes, including preparation for cutting, preparation of uppers, preparation for assembly and making of shoes and components.
This course addresses the following units and all these units are clustered for delivery but may assessed separately.
MSTGN4001 - Coordinate or set up machines for product change
MSTFP3001 - Cut leather by hand
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
MSTFP2011 Perform table-based operations |
||||||||||||
Element: |
1 Determine job requirements |
||||||||||||
Performance Criteria: |
|
||||||||||||
Element: |
2 Prepare work pieces |
||||||||||||
Performance Criteria: |
|
||||||||||||
Element: |
3 Prepare workstation |
||||||||||||
Performance Criteria: |
|
||||||||||||
Element: |
4 Carry out table-based activities |
||||||||||||
Performance Criteria: |
|
Learning Outcomes
On successful completion of this course you will have developed and applied the skills and knowledge required to demonstrate competency in the above elements.
Details of Learning Activities
You will learn to use and work with a range of materials, suppliers and components used in footwear manufacturing.
Teaching Schedule
Weekly Schedule
Course Schedule: Semester 1, 2021 | |||
Week |
Topic |
Activities |
Assessment |
Week 1 |
Introduction to course |
Class | |
Week 2 |
Oxford working patterns | Workshop | |
Week 3 |
Clicking press | Demonstration |
Task 2 - Minor Maintenance Record Task 3 - Clicking Press Practical 1 |
Week 4 |
Clicking press | Demonstration | Task 3 - Clicking Press Practical 1 |
Week 5 |
Workshop | Workshop | |
Week 6 |
Workshop | Workshop | Task 1 - Knowledge Questions |
Week 7 |
Sewing Machine and leather shapes | Demonstration/observation |
Task 2 Part 2 - Work with leather and perform table-based operations (Make Oxford & Derby Shoe) Task 3 - Sewing Machine Practical 2 |
Week 8 |
Sewing Machine | Demonstration/observation |
Task 2 Part 2 - Work with leather and perform table-based operations (Make Oxford & Derby Shoe) Task 3 - Sewing Machine Practical 2 |
Week 9 |
Cut, skive & prepare leather: Court shoe uppers | Workshop |
Task 2 Part 2 - Work with leather and perform table-based operations (Make Oxford & Derby Shoe) |
Week 10 |
Sandal and Oxford shoe | Workshop |
Task 2 Part 2 - Work with leather and perform table-based operations (Make Oxford & Derby Shoe) |
Week 11 |
Sandal and Oxford shoe | Workshop |
Task 2 Part 2 - Work with leather and perform table-based operations (Make Oxford & Derby Shoe) |
Week 12 |
Sandal and Oxford shoe | Workshop |
Task 2 Part 2 - Work with leather and perform table-based operations (Make Oxford & Derby Shoe) |
Week 13 |
Sandal and Oxford shoe | Workshop |
Task 2 Part 2 - Work with leather and perform table-based operations (Make Oxford & Derby Shoe) |
Week 14 |
Sandal and Oxford shoe | Workshop |
Task 2 Part 2 - Work with leather and perform table-based operations (Make Oxford & Derby Shoe) |
Week 15 |
Sandal and Oxford shoe | Workshop |
Task 2 Part 2 - Work with leather and perform table-based operations (Make Oxford & Derby Shoe) |
Week 16 |
Final class/assessment submission | Workshop |
Task 2 Part 3 - Quality Checklist / Discrepancy Report x2 |
Learning Resources
Prescribed Texts
References
Other Resources
The University Library has extensive resources. The Library has produced a number of subject guides that includes quality online and print resources for your studies. The Library provides guides and subject specialist help via your Liaison Librarians.
Overview of Assessment
Assessment is ongoing throughout the semester and will consist of both theory and practical based exercises, predominantly in class but some out of class research and information formatting is required as well. Feedback will be provided throughout the semester on all assessment tasks.
All assessment tasks must be completed before competency can be achieved. Tasks that have not be authenticated in class as the student’s own work will not be considered for assessment. Regular attendance is encouraged.
If you have a long term medical condition and/or disability it may be possible to negotiate to vary aspects of the learning or assessment methods. You can contact the program coordinator or the Disability Liaison Unit if you would like to find out more.
Your course assessment conforms to RMIT assessment principles, regulations, policies, procedures and instructions which are available for review online: http://www.rmit.edu.au/students/assessment
Assessment Tasks
Task 1
Summary and Purpose of Assessment
This short-answer assessment task is one of three assessment tasks you need to complete satisfactorily, in order to be deemed competent for this cluster.
This assessment task allows you to demonstrate your knowledge required to:
- Coordinate or set-up machines for product change
- Cut leather by hand
- Perform table-based operations
Assessment Instructions
What
- You must satisfactorily answer all 9 questions
- You should answer all questions in the spaces provided, using full sentences,word count and dot points when requested
- All work must be your own
Where
This is an online assessment task. You will need to answer all questions on CANVAS.
How
The knowledge assessment is accessed through the Canvas shell and you must complete and submit your responses within the allocated assessment timeframe.
If you are not able to attend the scheduled assessment timeframe you need to advise your teacher so that an alternative assessment arrangement can be made. This knowledge assessment is an individual assessment task that must be completed with minimal support from your supervisor (allowed support includes further explanation of the task requirements or explanation of assessment criteria etc).
Task 2
Summary and Purpose of Assessment
This practical assessment task is the second of three assessment tasks you need to complete satisfactorily, in order to be deemed competent for this cluster.
This practical assessment will allow you to demonstrate your ability to perform table operations and cut leather by hand.
Assessment Instructions
What
There are 3 parts to this task, you will be required to complete:
Part 1: Prepare equipment, materials and workstation
Part 2: Work with leather and perform table-based operations
Part 3: Check quality of finished product
You are required to make a pair of derby shoes and an oxford shoes.
Where
This assessment will be conducted in the footwear workshop.
How
You will be assessed against the criteria as listed in the observation checklist in Section B of this task and how well you answer the questions asked by your assessor. To achieve a satisfactory result, you will need to address all criteria satisfactorily.
Task 3
Summary and Purpose of Assessment
This practical assessment task is the third of three assessment tasks you need to complete satisfactorily, in order to be deemed competent for this cluster.
This practical assessment will allow you to demonstrate your ability to set up machines for production changes in a footwear enterprise.
Assessment Instructions
What
There are 3 parts to this task, you will be required to complete:
Part 1: Prepare to set up machines
Part 2: Organise sample quality testing
Part 3: Finalise and record machine settings
You are required to set up machines for 2 different product changes. This involves:
- Interpreting specifications for machine settings
- Operating machine in accordance with manufacturer and workplace instructions to produce samples
- Test samples
- Make appropriate re-adjustments based on the test results and
- Communicate effectively with operators (your Assessor) about the set up and change in machine settings.
You will set up the product changes using:
- Clicking press and
- Sewing machine
Where
This assessment will be conducted in the footwear workshop.
How
You will be assessed against the criteria as listed in the observation checklist in Section B of this task and how well you answer the questions asked by your assessor. To achieve a satisfactory result, you will need to address all criteria satisfactorily.
Assessment Matrix
The assessment matrix demonstrates alignment of assessment tasks with the relevant unit of competency. These matrices are available through Program Administration (or Course Coordinator)
Other Information
Please refer to the RMIT student page for extensive information about study support, assessment, extensions, appeals and a range of other matters: https://www.rmit.edu.au/students
A student charter summarises your responsibilities as an RMIT student as well as those of your teachers. https://www.rmit.edu.au/about/our-education/supporting-learning-and-teaching/student-charter/
Attendance:
Your learning experience will involve class-based teaching, discussion, demonstration and practical exercises
It is strongly advised that you attend all timetabled sessions. This will allow you to engage in the required learning activities, ensuring you the maximum opportunity to complete this course successfully.
Student Progress:
Monitoring academic progress is an important enabling and proactive strategy designed to assist you in achieving your learning potential.
http://www1.rmit.edu.au/students/acadprogress
Cover Sheet for Submissions:
You must complete and sign a submission cover sheet for every piece of submitted work, including online submissions. http://www.rmit.edu.au/staff/studentadmin/assessment/authorisation
Adjustments to Assessment (eg. applying for an extension of time):
If you are unable to complete any piece of assessment satisfactorily by the due date, you can choose to apply for an adjustment to your assessment. RMIT University offers a range of adjustments designed to support you in your studies, including an extension of time to complete the assessment.
http://www1.rmit.edu.au/students/assessment/adjustment
Special consideration Policy
If you wish to apply for special consideration, follow this link for the procedure. http://www1.rmit.edu.au/students/specialconsideration
Penalties for late Submission of Assignments
Late submission or presentation of assessable work without an approved extension will be penalised as follows:
Complete work submitted 1 to 7 days late will incur a penalty of 5% per day on your final markPartial or incomplete work submitted 1 to 7 days late will incur a penalty of 5% per day on your final mark for the entire assessable workWork submitted after day 7 will be awarded an NN grade and 0% markWeekends and holiday periods are included in the calculation of the late penaltyWhere a due date includes a specific time for submission or presentation, submissions after that time on the due date incur a 5% penalty.
Academic Integrity and Plagiarism:
RMIT University has a strict policy on plagiarism and academic integrity. Please refer to the website for more information on this policy. http://www1.rmit.edu.au/students/academic-integrity
Credit Transfer and Recognition of Prior Learning:
Credit transfer is the recognition of previously completed formal learning (an officially accredited qualification).
Recognition of Prior Learning (RPL) is an assessment process that allows you to demonstrate competence using the skills you have gained through experience in the workplace, voluntary work, informal or formal training or other life experiences.
Recognition of Current Competency (RCC) RCC applies only if you have previously successfully demonstrated competence in a unit of competency, and now require to be reassessed to ensure that the competence is being maintained.
Please speak to your teacher if you wish to discuss applying for Credit Transfer, RPL, or RCC for the unit(s) of competency addressed in this course.
http://www1.rmit.edu.au/students/enrolment/credit
Course Overview: Access Course Overview