Course Title: Apply site surveys and set-out procedures to medium rise building projects
Part B: Course Detail
Teaching Period: Term1 2022
Course Code: BUIL6237C
Course Title: Apply site surveys and set-out procedures to medium rise building projects
Important Information:
Please note that this course may have compulsory in-person attendance requirements for some teaching activities.
To participate in any RMIT course in-person activities or assessment, you will need to comply with RMIT vaccination requirements which are applicable during the duration of the course. This RMIT requirement includes being vaccinated against COVID-19 or holding a valid medical exemption.
Please read this RMIT Enrolment Procedure as it has important information regarding COVID vaccination and your study at RMIT: https://policies.rmit.edu.au/document/view.php?id=209.
Please read the Student website for additional requirements of in-person attendance: https://www.rmit.edu.au/covid/coming-to-campus
Please check your Canvas course shell closer to when the course starts to see if this course requires mandatory in-person attendance. The delivery method of the course might have to change quickly in response to changes in the local state/national directive regarding in-person course attendance.
School: 530T Built Environment and Sustainability
Campus: City Campus
Program: C5256 - Diploma of Building and Construction (Building)
Course Contact: Thierry Demathieu, Program Manager
Course Contact Phone: +61 3 9925 8359
Course Contact Email: thierry.demathieu@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Teacher
Sadia Afrin
+61399254097
sadia.afrin2@rmit.edu.au
Nominal Hours: 110
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
Nil
Course Description
In this course you will cover the outcomes required to apply site surveys and set-out procedures to medium rise building and construction projects. It addresses the skills and practices required to measure, record and interpret data using measuring and levelling equipment and to set out building projects. The ability to operate specific surveying equipment and apply calculations and knowledge of the Building Code of Australia (BCA) and Australian standards are essential.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
CPCCBC5006B Apply site surveys and set-out procedures to medium rise building projects |
Element: |
1. Set out a T-shaped or L-shaped building on a selected site with minimal profiles. |
Performance Criteria: |
1.1. Site information and dimensions are identified from site plan and checked against plan drawings. 1.2. Survey pegs are measured to ensure correct identification occurred before pilot pegs are positioned. 1.3. Profiles pegs are set up on site at a working distance from pilot pegs and parallel to pilot line. 1.4. Marks to indicate outside of building or other structural members are made. |
Element: |
2. Prepare and test levelling devices. |
Performance Criteria: |
2.2. Basic tests on levelling device accuracy are performed according to manufacturer specifications. 2.3. Effects of maladjustment in levelling devices are identified and recorded according to standard operating procedures. |
Element: |
3. Operate levelling devices. |
Performance Criteria: |
3.1. Temporary adjustments to set up levelling equipment are carried out in accordance with standard operating procedures. 3.2. Horizontal and vertical angles are determined using levelling devices. 3.3. Site is set out to specifications using levelling devices. |
Element: |
4. Identify specialised levelling and surveying equipment available on large building projects for various set-out and checking procedures. |
Performance Criteria: |
4.1. Differences between various types of specialised surveying equipment are researched and recorded. 4.2. Survey of each level checked for vertical accuracy of 10mm using two levelling devices is carried out. |
Element: |
5. Compute coordinates and bearings, distances related to grids and general set-out work on large building sites. |
Performance Criteria: |
5.1. Angular relationship between different bearings (whole circle) is demonstrated. 5.2. Bearing and distance between coordinates are calculated. 5.3. Coordinates of a point given the bearing and distance from a point with known coordinates are calculated. 5.4. Offsets from a coordinated point given the bearing and distance from a point with known coordinates are determined. 5.5. Information necessary to set out a structure using a site plan is determined. |
Learning Outcomes
On successful completion of this course you will have developed and applied the skills and knowledge required to demonstrate competency in the above elements.
Details of Learning Activities
You will learn to:
1. Set out a T-shaped or L-shaped building on a selected site with minimal profiles.
1.1. Site information and dimensions are identified from site plan and checked against plan drawings.
1.2. Survey pegs are measured to ensure correct identification occurred before pilot pegs are positioned.
1.3. Profiles pegs are set up on site at a working distance from pilot pegs and parallel to pilot line.
1.4. Marks to indicate outside of building or other structural members are made.
2. Prepare and test levelling devices.
2.1. Various components of levelling devices are identified.
2.2. Basic tests on levelling device accuracy are performed according to manufacturer specifications.
2.3. Effects of maladjustment in levelling devices are identified and recorded according to standard operating procedures.
3. Operate levelling devices.
3.1. Temporary adjustments to set up levelling equipment are carried out in accordance with standard operating procedures.
3.2. Horizontal and vertical angles are determined using levelling devices.
3.3. Site is set out to specifications using levelling devices.
4. Identify specialised levelling and surveying equipment available on large building projects for various set-out and checking procedures.
4.1. Differences between various types of specialised surveying equipment are researched and recorded.
4.2. Survey of each level checked for vertical accuracy of 10mm using two levelling devices is carried out.
5. Compute coordinates and bearings, distances related to grids and general set-out work on large building sites.
5.1. Angular relationship between different bearings (whole circle) is demonstrated.
5.2. Bearing and distance between coordinates are calculated.
5.3. Coordinates of a point given the bearing and distance from a point with known coordinates are calculated.
5.4. Offsets from a coordinated point given the bearing and distance from a point with known coordinates are determined.
5.5. Information necessary to set out a structure using a site plan is determined.
The total number of scheduled hours of teaching, learning and assessment involved in this course includes all planned activities (face to face classes, lectures, workshops and seminars; workplace visits, online learning and other forms of structured teaching and learning). It also covers the amount of effort necessary to undertake, evaluate and complete all assessment requirements, observation of work performance, discussions with supervisors and others providing third party evidence and one on one and group assessment sessions with students.
Students will be able to access course information and learning materials through the Learning Hub and may be provided with additional materials in class. Lists of relevant reference books, resources in the library and accessible Internet sites will be provided where possible. You will also use equipment and software packages in the laboratory for the project work. During the course, you will be directed to websites to enhance your knowledge and understanding of difficult concepts. |
Teaching Schedule
|
Learning Resources
Prescribed Texts
References
Other Resources
Overview of Assessment
Assessment will incorporate a variety of methods including written,oral, practical tasks and activities. You will be asked to personally demonstrate to your teacher/assessor the practical skills gained during this course to the relevant industry standards. Assessment activities will occur throughout this course and feedback will be provided at regular intervals.
Assessment Tasks
Students must pass each of the following assessment tasks to demonstrate competent.
Assessment 1 Practical Survey Techniques 1
Assessment 2 Practical Survey Techniques 2
Assessment 3 Practical Survey Techniques 3
Assessment 4 Test 1a, Test 1b, Test 1c, Test 1d
Assessment 5 Test 2a, Test 2b, Test 2c, Test 2d
Assessment Tasks
Number and title |
Assessment 1 (Practical Assessment – Task 1) Assessment activities are to be completed by the student and achieve a satisfactory (S) grade. |
Assessment 2 (Practical Assessment – Task 2) Assessment activities are to be completed by the student and achieve a satisfactory (S) grade. |
Assessment 3 (Practical Assessment – Task 3) Assessment activities are to be completed by the student and achieve a satisfactory (S) grade. |
Assessment 4 (Knowledge Quiz -Task 1) |
Assessment 5 (Knowledge Quiz -Task 2) |
Assessment Matrix
Range Statement | |||||
|
Assessment Task 1: Title |
Assessment Task 2: Title |
Assessment Task 3: Title |
Assessment Task 4: Title |
Assessment Task 5: Title |
Levelling equipment includes: |
|||||
|
|||||
|
|||||
|
|||||
|
1C |
||||
|
1C |
Required Skills | |||||
|
Assessment Task 1: Title |
Assessment Task 2: Title |
Assessment Task 3: Title |
Assessment Task 4: Title |
Assessment Task 5: Title |
application of design concepts and principles to survey and site set-out |
2A |
2D |
|
|
|
application of measurements and calculations to survey and site set-out |
1D, 1E, 1F, 1G |
2E, 2F, 2G |
1C |
|
|
communication skills to: |
|
|
|
|
|
|
1D, 1E, 1F, 1G, 2A, 2B, 3, 4 |
1C, 3 |
2 |
|
|
|
1C, 1D, 1E, 1F, 2B |
1C |
1C |
|
|
|
|
|
|
|
|
|
1D |
1C |
1C |
|
|
|
1A |
1A |
1A |
|
|
|
1A, 1B, 1C |
1A, 1C, 2E, 2H |
1A, 1C |
|
|
|
1A, 1B, 1C, 1D, 1E, 1F, 2A, 2B, 3 |
1A, 1C |
1A, 1C |
|
|
|
1D, 1E, 1F, 1G, 2A, 2B, 2C, 3 |
2A – H, 3 |
|
|
|
interpretation skills to understand documentation from a wide range of sources, including state regulatory authority requirements |
1A, 1B, 1C |
1A, 1C, 2E, 2H |
1A, 1C |
|
|
numeracy skills to apply measurements and calculations. |
1G |
1C, 2E, 2F |
1C |
|
|
Required Knowledge | |||||
|
Assessment Task 1: Title |
Assessment Task 2: Title |
Assessment Task 3: Title |
Assessment Task 4: Title |
Assessment Task 5: Title |
application of design principles |
2A |
2D |
|
9 |
|
BCA and Australian standards and manufacturer specifications |
1A |
1A |
1A |
|
|
building systems and application to survey and site set-out |
|
|
|
10 |
|
level and grade checking used to perform survey control to accuracy criteria |
|
|
|
1,2, 3, 4, 5, 6 |
5 |
OHS measures as identified by equipment manufacturers and Australian standards |
1A |
1A |
1A |
11 |
|
relevant legislative requirements, codes and practices |
|
|
|
12, 13 |
|
survey and levelling devices and effect of performance on site |
|
|
|
2, 3, 4, 5, 6
|
1, 2, 5 |
work drawings and specifications. |
|
|
|
1, 6, 7, 8
|
1, 2, 3, 4, 5, 6 |
Critical Aspects of Evidence |
Describe how assessments meet the critical aspects of evidence |
A person who demonstrates competency in this unit must be able to provide evidence of the ability to: | |
|
AT1, AT2 and AT3 require the students to undertake levelling activities and report accurate results. |
|
AT1, AT2 and AT3 require the students to document SWMS appropriate to the worksite. |
|
AT1, AT2 and AT3 require the students to document SWMS appropriate to the worksite and based on codes and legislation. They also require the student to read and interpret plans, specifications and procedures for carrying out work. |
|
AT1, AT2 and AT3 require the students to undertake levelling activities using different levelling devices. |
|
AT1, AT2 and AT3 require the students to identify and resolve problems with equipment and measurements. |
|
AT1, AT2 and AT3 require the students to document SWMS appropriate to the worksite. |
Context of and specific resources for assessment |
Describe how assessments meet the context of and specific resources for assessment |
This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints. |
The student will undertake all activities in a simulated environment according to a SWMS and using procedures. Work will be weather contingent. |
Assessment of essential underpinning knowledge will usually be conducted in an off-site context. |
Students will undertake two tests of knowledge evidence. |
Assessment is to comply with relevant regulatory or Australian standards' requirements. |
The student must apply regulations and standards to the identification and control of risks. |
Resource implications for assessment include: |
|
|
AT1, AT2 and AT3 include documentation to inform and for recording levelling activities. |
|
AT2 provides students with access to research resources and information for conducting research |
|
AT1, AT2, AT3 require students to identify and apply different frameworks to SWMS, reports and carrying out the work. |
Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support. |
Please refer to RMIT guidelines for reasonable adjustment. |
Other Information
Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
- Relevant
- Current
- Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:
assignment writing, thesis writing and study skills advice
maths and science developmental support and advice
English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Equitable Learning Services (ELS):
If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).
Late submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special consideration:
Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Other Information:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview