Course Title: Construct complete removable acrylic dentures and appliances

Part B: Course Detail

Teaching Period: VE 2020

Class Number: All

Class Section: All

For flexible terms and optional semesters, a Part B course guide may have been published for the entire teaching period, or for the specific class number in which you are enrolled. If there is no Part B course guide published for your specific class number, please refer to the guide for the teaching period in which you are enrolled. Enrolment Online is the definitive source for details regarding your class enrolment.

Course Code: DENT5875C

Course Title: Construct complete removable acrylic dentures and appliances

School: 174T School of VE Engineering, Health & Science

Campus: City Campus

Program: C5387 - Diploma of Dental Technology

Course Contact: Rachael Starr

Course Contact Phone: +61 3 9341 1420

Course Contact Email: rachael.starr@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Nominal Hours: 150

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

None

Course Description

This unit of competency describes the skills and knowledge required to construct a complete trial prosthesis for upper and lower arch, suitable for insertion in the mouth, then convert it to clinically acceptable materials and finish according to laboratory standards.

This unit applies to work in dental technology.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

HLTDET015 Construct complete removable acrylic dentures and appliances

Element:

1. Articulate by means of face-bow

Performance Criteria:

1.1 Receive face-bow with completed bite registration. 1.2 Read and interpret work order 1.3 Articulate on an industry specific articulator in accordance with clinician requirements

Element:

2. Prepare case for setting of teeth

Performance Criteria:

2.1 Select artificial teeth in accordance with work order 2.2 Modify bases and rims as required for positioning teeth

Element:

3. Arrange artificial teeth

Performance Criteria:

3.1 Follow work order to position and attach the prescribed artificial teeth 3.2 Shape and contour the supportive wax and contour to gingival outline

Element:

4. Wax up denture for try-in

Performance Criteria:

4.1 Contour facial and lingual aspects 4.2 Locate and relieve muscle attachments 4.3 Smooth and round peripheral extensions 4.4 Confirm distal extensions 4.5 Decontaminate the trial prosthesis according to infection control guidelines 4.6 Dry the trial prosthesis and place in a sealed container for dispatch

Element:

5. Check and modify the returned trial prosthesis

Performance Criteria:

5.1 Decontaminate the returned prosthesis and identify any modifications that are required 5.2 Check the returned trial prosthesis for loosening or movement of teeth and make necessary adjustments 5.3 Fit the returned trial prosthesis to the model if it needs to be modified, articulate and make necessary modifications

Element:

6. Wax case for finish consistent with work order

Performance Criteria:

6.1 Evaluate the work order, models and denture design and decide whether or not to use a duplicate model for processing the final prosthesis 6.2 Apply wax as required by work order 6.3 Contour facial and lingual aspects

Element:

7. Select and prepare materials and processing technique

Performance Criteria:

7.1 Identify the appropriate polymer system for case 7.2 Identify the appropriate investment technique 7.3 Identify the appropriate processing cycle 7.4 Select polymeric material to construct the prosthesis 7.5 Prepare system components in accordance with manufacturers' instructions 7.6 Allow materials to reach application stage

Element:

8. Process denture

Performance Criteria:

8.1 Apply appropriate investment techniques 8.2 Apply material to mould 8.3 Process the polymeric material for the correct length of time at the correct temperature 8.4 Devest model and remove the processed prosthesis without causing damage to it 8.5 Trim excess material and remount on articulator

Element:

9. Finish denture

Performance Criteria:

9.1 Select methods, materials and equipment for trimming, finishing and polishing the prosthesis appropriate to the appliance and the materials used in its construction 9.2 Reposition models on the articulator where possible 9.3 Assess the articulated prosthesis and confirm that articulation is appropriate to the work order 9.4 Make any necessary adjustments to maintain original vertical dimension 9.5 Remove any processing irregularities and sharp edges 9.6 Polish the non-fitting surfaces of the prosthesis to create smooth, polished surfaces 9.7 Evaluate the finished prosthesis 9.8 Decontaminate the dentures according to infection control guidelines 9.9 Place in a sealed container for dispatch


Learning Outcomes


On completion of this course, you should be able to:

  1. Design acrylic removable partial denture
  1. Prepare case for setting of teeth 
  1. Arrange artificial teeth 
  1. Wax up denture for try-in 
  1. Check and modify the returned trial prosthesis 
  1. Wax case for finish consistent with work order 
  1. Select and prepare materials and processing technique 
  1. Process denture
  1. Finish denture 


Details of Learning Activities

Theory lectures/tutorial  

Practical laboratory activities


Teaching Schedule

Refer to Canvas for Teaching schedule


Learning Resources

Prescribed Texts


References


Other Resources


Overview of Assessment

To be deemed competent you must demonstrate an understanding of all aspects required of the competency.   

Regular attendance is necessary. 

Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks and consist of theory and practical based tasks.


Assessment Tasks

Assessment 1: Construct complete removable acrylic dentures and appliances theory exam Assessment 2: Construct complete removable acrylic dentures and appliances practical assessment, Part 1 (set up fully edentulous maxilla and mandibular denture for trial) & Part 2 (process fully edentulous maxilla and mandibular denture for insert) 


Assessment Matrix

The assessment tasks listed in this course guide address all the elements and criteria of the requirements of this course. 

Course Overview: Access Course Overview