Course Title: Carry out geometric road design
Part B: Course Detail
Teaching Period: Term1 2015
Course Code: CIVE5678
Course Title: Carry out geometric road design
School: 130T Vocational Engineering
Campus: City Campus
Program: C6093 - Advanced Diploma of Engineering Design
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: email@example.com
Name and Contact Details of All Other Relevant Staff
Dr. A R M Muniruzzaman
School of Vocational Engineering (SoVE)
Tel: (03) 9925 4415
Fax: (03) 9925 4189
Nominal Hours: 40
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
EDX130B – Use technical mathematics (basic)
EDX140B – Use technical mathematics (advanced)
EDC040B – Perform measurements and layout tasks on construction sites.
EDC050B – Prepare drawings required in the construction of rural roads.
This unit covers the competency to design and calculate the geometry of both rural and urban roads using relevant Australian road design standards.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title:
EAC050B Carry out geometric road design
1. Design and calculate the horizontal alignment of a roadway centreline.
1.1 Tabulated data is extracted as required.
2. Design and calculate the vertical alignment of a roadway centreline.
2.1 Tabulated data is extracted as required.
3. Design and calculate the combined horizontal and vertical alignment of a roadway centreline.
3.1 Tabulated data is extracted as required.
4. Design an intersection at grade for a given design vehicle.
4.1 Tabulated data is extracted.
Details of Learning Activities
You will be involved in the following learning activities to meet requirements for this course.
• Journals/Research Work/Team Work
• Self-Directed Learning
• Site Visit/Excursion/Guest Speaker (TBA)
- Face to face lectures for each element covering fundamental knowledge of geometric road design, including workplace secenarios through refernece materials such as videos and reports from relevant organisations.
Student based problem solving and directed study:
- Participate in individual and team problem solving activities and directed study which includes research on specific topics.
Engineering employment requires the capacity to work effectively in teams, to communicate effectively in both oral and writing and to learn effectively. In order to prepare students for employment as graduates they will be provided a quality assured teaching and learning environment which is conductive to the development of adult learning. Adult learning is characterised by the students accepting responsibility for their own learning and actively participating in the learning process as individuals and as contributors to the teams. Adult learning is the hallmark of a professional. The specific responsibilities as adult learners in respect of this subject are:
- to be aware of and to observe the regulations related to plagiarism
- to submit (on time) all work for assessment as required
- to complete all pre-reading and preparatory work prior to the class for which it will be used
- to effectively use the academic staff resources provided (consultation time, tutors, e- mail etc)
- to participate as an effective and honest member of a learning team
- to contribute effectively to a group of peers in a climate of mutual respect and to question each other and the academic staff when uncertain
Effective Communication Presentation of subject material in the most up to date manner. Assessment by way of exams and laboratory reports
Creative: Planning & organising activities Collecting, analysing & organising information.
Ethical responsibilities: Introducing Engineers Australia Code of Ethics Observing legislation and statutory requirements. Identifying plagiarism attempts
Team work : Appropriate personnel to be consulted to ensure the work is co-ordinated effectively with others involved on the module activities Team approach in collating and evaluating results of research or testing procedures undertaken
Long-life learners: Encourage self-study through curiosity Some percentage of assessment will test these skills Professional Attitudes Presenting professional image Communication, class participation and performance.
|Week||Topics Delivered||Resource and Activities||Elements / Performance criteria||Assessment Tasks|
|1 - 2||
Introduction to Geometric Road Design
Directed Study - on geometric road design
|1.1, 1.2, 1.3|
|3 - 4||
Fundamentals of road design
· Analysis of a traffic facility
· Characteristics of traffic flow
· Service flow rate
· Statutory requirements
|1.1, 1.2, 1.4|
Speed parameters &
|1.1, 1.2, 1.5|
|6 - 7||
Introduction to Horizontal alignment
· Types of circular curves
· Terminology of circular curves
· Length and radius of circular curves
· Use of transition curve
· Types of transition curve
· Length of transition curve
|1.2, 1.4||Assignment 1|
|8 - 9||
Design and calculate the horizontal alignment of a roadway centreline- Circular & Transition curves
· Superelevation - concept & application
· Spiral plan transitions
· Shift superelevation transitions
|1.2, 1.3,1.4 1.5||Assignment 1|
|1.1, 1.2, 1.3,1.4 1.5||
due in Week 10
Design and calculate the vertical alignment of a roadway centreline- Crest curve.
|2.1, 2.2, 2.3||
|13||Design and calculate the vertical alignment of a roadway centreline-Sag curve.
|2.1, 2.2, 2.3||Assignment 2|
|14||Design and calculate the combined horizontal and vertical alignment of a roadway centreline- Cross section.||Activity 1:
Carry out assignment 2 in class.
|3.1, 3.2, 3.3, 3.4, 3.5||Assignment 2|
|15||Designing and calculating intersections at grade.
Design and calculate intersection at grade.
|4.1, 4.2, 4.3, 4.4, 4.5||
due in Week 15
|16||Designing and calculating intersections at grade.
Design and calculate intersection at grade.
|17 - 18||Exam||2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 3.5, 4.1, 4.2, 4.3, 4.4, 4.5|
Design standards include current AUSTROADS publications – ‘Urban Design Guide’, ‘Rural design Guide’, and ‘Guide for the design of intersections at grade’
1. Work notes.
2. Calculator, ruler and pencil.
3. Prescribed text books
4. Access to blackboard notes.
5. AutoCAD Civil 3d software access at home.
Overview of Assessment
Assessment are conducted in both theoretical and practical aspects of the course according to the performance criteria set out in the National Training Package. Students are required to undertake summative assessments that bring together knowledge and skills. To successfully complete this course you will be required to demonstrate competency in each assessment tasks detailed under the Assessment Task Section.
Your assessment for this course will be marked using the following table:
NYC (<50%) Not Yet Competent
CAG (50-59%) Competent - Pass
CC (60-69%) Competent - Credit
CDI (70-79%) Competent - Distinction
CHD (80-100%) Competent - High Distinction
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package.
Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards.
Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor.
Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks section of Course Guide Part B.
Assignments1 & 2 : Design and calculate the horizontal and vertical alignment of a roadway centreline - 30% weightage
Assignment 1: Selection of preffered road alignment & Horizontal alignment design : 15% weightage
Assignment 2: Verticle alignment design and Setting out vertical curve : 15% weightage
Exams : Covers all performance criteria : 70% weightage
Student has also to show an understanding of Occupational Health and Safety to an extent indicated by the following aspects:
- basic legal requirements covering occupational health and safety in the workplace
- the requirements for personal safety in the workplace
- identifying potential workplace hazards and suggested measures for accident prevention
- working safely with electrical tools or equipment
Assessment requirements also include:
- attendance and satisfactory completion of prescribed practical exercises ,
- Evidence of participation in and satisfactory completion of work simulation projects.
- satisfactory completion of class assignment work
- timely submission and standard presentation for all assessment material / documentation
Assessment vs EAC050B Elements and Performance Criteria
|Assessment Tasks||Performance criteria/Elements||Total weighting|
|Assignments 1, 2||1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 3.5||30%|
|Exams||1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 3.5, 4.1, 4.2, 4.3, 4.4, 4.5||70%|
|EAC050B Elements & Performance Criteria|
Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities. The estimated time is minimum 20 hours outside the class time.
Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
• Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
Study and Learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:
• Assignment writing, thesis writing and study skills advice
• Maths and science developmental support and advice
• English language development
Please refer to http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and Learning Support.
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please refer to http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for seven calendar days or less (from the original due date) and have valid reasons, you must complete an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than two working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than seven calendar days (from the original due date), you must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than two working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Please refer to http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration.
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the university.
Please refer to http://www.rmit.edu.au/academicintegrity to find more information about plagiarism.
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview