Course Title: Solve problems in low voltage a.c. circuits
Part B: Course Detail
Teaching Period: VE 2021
Class Number: All
Class Section: All
For flexible terms and optional semesters, a Part B course guide may have been published for the entire teaching period, or for the specific class number in which you are enrolled. If there is no Part B course guide published for your specific class number, please refer to the guide for the teaching period in which you are enrolled. Enrolment Online is the definitive source for details regarding your class enrolment.
Course Code: EEET7027C
Course Title: Solve problems in low voltage a.c. circuits
School: 174T School of VE Engineering, Health & Science
Campus: City Campus
Program: C6120 - Advanced Diploma of Engineering Technology - Electrical
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: vehs@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Program Manager
Dr.A R M Muniruzzaman (Munir)
Engineering, Electrical & Telecom Programs
Office: (+61 3) 9925 4415
Mobile: (+61 4) 1857 8333
Fax: (+61 3) 9925 4189
Email: munir.muniruzzaman@rmit.edu.au
Teachers
Rand Gorgis
Ph: (+61 3) 9925 4378
Fax: (+61 3) 9925 4377
Email: rand.gorgis@rmit.edu.au
William Lau
Ph: (+61 3) 9925 4703
Fax: (+61 3) 9925 4377
Email: william.lau@rmit.edu.au
Appointment by email
Nominal Hours: 80
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
UEENEEE101A + UEENEEE104A + UEENEEG101A
Course Description
This unit covers ascertaining correct operation of single and three phase a.c. circuits and solving circuit problems as they apply to servicing, fault finding, installation and compliance work functions. It encompasses safe working practices, multiphase circuit arrangements, issues related to protection, power factor and MEN systems and solutions to circuit problems derived from calculated and measured parameters.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
UEENEEG102A Solve problems in low voltage a.c. circuits |
Element: |
1. Prepare to solve low voltage a.c. circuit problems. |
Performance Criteria: |
1.1 OHS procedures for a given work area are identified, obtained and understood. 1.2 Established OHS risk control measures and procedures in preparation for the work are followed. 1.3 Safety hazards, which have not previously been identified, are noted and established risk control measures are implemented. 1.4 The nature of the circuit(s) problem is obtained from documentation or from work supervisor to establish the scope of work to be undertaken. 1.5 Advice is sought from the work supervisor to ensure the work is coordinated effectively with others. 1.6 Sources of materials that may be required for the work are established in accordance with established procedures. 1.7 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety. |
Element: |
2. Solve low voltage a.c. circuit problems. |
Performance Criteria: |
2.1 OHS risk control measures and procedures for carrying out the work are followed. 2.2 The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures. 2.3 Circuits/machines/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures. 2.4 Established methods are used to solve circuit problems from measure and calculated values as they apply to single and three-phase low voltage circuit. 2.5 Unexpected situations are dealt with safely and with the approval of an authorised person. 2.6 Problems are solved without damage to apparatus, circuits, the surrounding environment or services and using sustainable energy practices. |
Element: |
3. Complete work and document problem solving activities. |
Performance Criteria: |
3.1 OHS work completion risk control measures and procedures are followed. 3.2 Work site is cleaned and made safe in accordance with established procedures. 3.3 Justification for solutions used to solve circuit problems is documented. 3.4 Work completion is documented and an appropriate person or persons notified in accordance with established procedures. |
Learning Outcomes
Refer to Elements
Details of Learning Activities
Learning Activities
You will involve in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates.
• lectures
• Tutorials
• Practicals
Engineers Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:
EA 1. Knowledge and Skill Base
EA 1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.
EA 2. Engineering Application Ability
EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.
EA 3. Professional and Personal Attributes
EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanor.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.
Engineers Australia Stage 1 Competencies are mapped with competency UEENEEG102A in the Assessment Matrix.
Classroom tutorial activities to consolidate the theory of concepts
Practical activities applied, with problem solving and related questions to develop skills in safe testing.
Projects may be undertaken as part of a team or individual basis.
Participate in individual and team problem solving scenarios/role plays/ case studies and participate in supervised workshop practice in simulated workplace environment dealing with a range of practical exercises related to:
1. Using of the CRO to measure a.c. voltage levels
2. Using of the CRO to measure ’period’, ’maximum value’, ’peak-to-peak value’, ’instantaneous value’, ’average value’, ’root-mean-square (r.m.s.) value’, in relation to a sinusoidal waveform.
3. Phasor diagrams to show the relationship between two or more a.c. values of voltage and/or current.
4. Ohm’s Law to determine voltage, current of inductive and capacitive reactance
5. RC and RL Series a.c. circuits
6. RLC Series and Parallel a.c. circuits
The application of the skills and knowledge described in this unit require a license to practice in the workplace where work is carried out on electrical equipment or installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c.
Other conditions may apply under State and Territory legislative and regulatory requirements.
Teaching Schedule
The proposed teaching schedule for this competency is detailed below:
For ET1A, ET1B & ET1C
Week |
Topic Delivered |
Elements/Performance Criteria |
1 |
AC Fundamentals
Introduction to Lab Equipment. |
1.1-1.7 |
2 |
AC Fundamentals Calculating peak-to-peak, instantaneous value, average and RMS values, frequency and phase angle (lead/lag) of sine waveforms Tutorial # 1 |
1.1-1.7 2.1-2.6 3.1-3.4 |
3 |
Phasors
Tutorial # 2 |
1.1-1.7 2.1-2.6 3.1-3.4 |
4 |
Single Element a.c. circuits Response of Basic R,L, and C to AC voltage & current Lab #1 |
1.1-1.7 2.1-2.6 3.1-3.4 |
5 |
RC and RL Series a.c. circuits
Tutorial # 3 |
1.1-1.7 2.1-2.6 3.1-3.4 |
6 | RLC Series a.c. circuits
|
1.1-1.7 2.1-2.6 3.1-3.4 |
7 |
RC and RL Parallel a.c. circuits
Tutorial 4 |
1.1-1.7 2.1-2.6 3.1-3.4 |
8 |
RLC parallel a.c. circuits
Lab # 3 |
1.1-1.7 2.1-2.6 3.1-3.4 |
9 |
AC power
Written Test |
1.1-1.7 2.1-2.6 3.1-3.4 |
10 |
Power Factor
Lab # 4 |
1.1-1.7 2.1-2.6 3.1-3.4 |
11 | Harmonics and Resonance Effect in a.c. Systems
Lab # 5 |
1.1-1.7 2.1-2.6 3.1-3.4 |
12 | Three Phase Systems
Lab # 6 |
1.1-1.7 2.1-2.6 3.1-3.4 |
13 | Three Phase Systems
Lab # 7 |
1.1-1.7 2.1-2.6 3.1-3.4 |
14 | Three Phase Systems
Lab # 8 |
1.1-1.7 2.1-2.6 3.1-3.4 |
15 |
Energy and power requirements of a.c. systems Tutorial 5 |
1.1-1.7 2.1-2.6 3.1-3.4 |
16 |
Fault Loop Impedance of a.c. power system
Project Due |
1.1-1.7 2.1-2.6 3.1-3.4 |
17-18 | Final written exam in Centralised Exam Period either in Week 17 or Week 18 |
For MET1:
Week | Topic Delivered | Elements / Performance Criteria |
1 | AC Fundamentals | 1.1-1.7 2.1-2.6 3.1-3.4 |
2 | AC Fundamentals | 1.1-1.7 2.1-2.6 3.1-3.4 |
3 | AC Fundamentals | 1.1-1.7 2.1-2.6 3.1-3.4 |
4 | AC Fundamentals | 1.1-1.7 2.1-2.6 3.1-3.4 |
5 | AC Fundamentals | 1.1-1.7 2.1-2.6 3.1-3.4 |
6 | AC Fundamentals | 1.1-1.7 2.1-2.6 3.1-3.4 |
7 | AC Fundamentals | 1.1-1.7 2.1-2.6 3.1-3.4 |
8 | AC Fundamentals | 1.1-1.7 2.1-2.6 3.1-3.4 |
9 | AC Fundamentals Lab #1 Tutorial 1 |
1.1-1.7 2.1-2.6 3.1-3.4 |
10 |
Phasors Perform addition, subtraction, multiplication and division with complex phasors Single Element a.c. circuits Lab #2 |
1.1-1.7 2.1-2.6 3.1-3.4 |
11 | RC and RL Series a.c. circuits Calculations on RLC Series a.c. circuits calculation of impedance, voltage and current for a series RLC circuit Lab #3 |
1.1-1.7 2.1-2.6 3.1-3.4 |
12 | RC and RL Parallel a.c. circuits Calculations on RLC parallel a.c. circuits calculation of impedance, voltage and current for a parallel RLC circuit Lab #4 |
1.1-1.7 2.1-2.6 3.1-3.4 |
13 | AC power Power in an a.c. circuit Power Factor Requirements for power factor improvement. Lab #5 |
1.1-1.7 2.1-2.6 3.1-3.4 |
14 |
Harmonics and Resonance Effect in a.c. Systems Series resonance Three Phase Systems Three phase star-connections Lab #7 |
1.1-1.7 2.1-2.6 3.1-3.4 |
15 |
Three Phase Systems Three phase delta-connections and Interconnected systems |
1.1-1.7 2.1-2.6 3.1-3.4 |
16 |
Energy and power requirements of a.c. systems Fault Loop Impedance of a.c. power system measurements and testing Tutorial 5 |
1.1-1.7 2.1-2.6 3.1-3.4 |
17 - 18 | Final written exam in Centralised Exam Period either in Week 17 or Week 18 |
Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is minimum 32 hours outside the class time.
Learning Resources
Prescribed Texts
References
Other Resources
Tutorial and Laboratory Instruction sheets will be available online (using Online Learning Hub) and student’s local drive.
Students will be able to access information and learning materials through myRMIT and may be provided with additional materials in class. List of relevant reference books, resources in the library and accessible Internet sites will be provided where possible. During the course, you will be directed to websites to enhance your knowledge and understanding of difficult concepts.
Overview of Assessment
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:
Assessment 1: Practical (Lab 1 – 6)
Assessment 2: Product Assignment
Assessment 3: Written Test
Assessment 4: Written Test - Final
These tasks assesses the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Element/Performance Criteria | Practical (Lab 1 – 6) | Product Assignment | Written Test | Written Test - Final |
1.1 | X | X | X | |
1.2 | X | X | X | |
1.3 | X | X | ||
1.4 | X | X | X | X |
1.5 | X | X | X | X |
1.6 | X | X | X | X |
1.7 | X | X | X | X |
2.1 | X | X | X | |
2.2 | X | X | X | |
2.3 | X | X | ||
2.4 | X | X | X | X |
2.5 | X | X | ||
2.6 | X | X | X | |
3.1 | X | X | X | |
3.2 | X | X | X | |
3.3 | X | X | X | X |
3.4 | X | X | X | X |
Assessment Tasks
Assessment 1: Practical (Lab 1 – 6)
Each student will complete 6 practical exercises designed to reinforce the theory topics taught during the semester.
Assessment 2: Product Assignment
Assessment 3: Written Test
Theoretical concept covered in weeks 1 to 8 will be assessed by a written test in week 9
Assessment 4: Written Test - Final
Theoretical concept covered in weeks 9 to 16 will be assessed by a written Test - Final in week 17 / 18 (exams period).
Assessment Matrix
Assessment vs UEENEEG102A Elements & Performance Criteria
Element/Performance Criteria | Practical (Lab 1 – 6) | Product Assignment | Written Test | Written Test - Final |
1.1 | X | X | X | |
1.2 | X | X | X | |
1.3 | X | X | ||
1.4 | X | X | X | X |
1.5 | X | X | X | X |
1.6 | X | X | X | X |
1.7 | X | X | X | X |
2.1 | X | X | X | |
2.2 | X | X | X | |
2.3 | X | X | ||
2.4 | X | X | X | X |
2.5 | X | X | ||
2.6 | X | X | X | |
3.1 | X | X | X | |
3.2 | X | X | X | |
3.3 | X | X | X | X |
3.4 | X | X | X | X |
Assessment vs Engineers Australia Stage 1 Competencies
Assessment vs Engineers Australia Stage 1 Competencies | ||||||||||||||||
Assessments | EA1.1 | EA1.2 | EA1.3 | EA1.4 | EA1.5 | EA1.6 | EA2.1 | EA2.2 | EA2.3 | EA2.4 | EA3.1 | EA3.2 | EA3.3 | EA3.4 | EA3.5 | EA3.6 |
Practical (Lab 1 – 6) | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X |
Product Assignment | X | X | X | X | ||||||||||||
Written Test | X | X | X | X | X | X | X | X | X | X | X | X | ||||
Final Test | X | X | X | X | X | |||||||||||
ALL ASSESSMENTS (UEENEEE126A) | 3 | 3 | 2 | 0 | 0 | 1 | 2 | 1 | 1 | 1 | 0 | 2 | 1 | 1 | 1 | 1 |
0 (Blank) | Graduate attribute is not assessed. | |||||||||||||||
1 | Graduate attribute is assessed in at least one, but less than one-third, of the Element. | |||||||||||||||
2 | Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element. | |||||||||||||||
3 | Graduate attribute is assessed in more than two-thirds of the Element. |
Other Information
Credit Transfer and/or Recognition of Prior Learning (RPL):
Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
- Relevant
• Current
• Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:
assignment writing, thesis writing and study skills advice
maths and science developmental support and advice
English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Equitable Learning Services (ELS):
If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).
Late submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Course Coordinator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) you must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special consideration:
Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Other Information:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview