Course Title: Use workshop equipment and processes to complete an engineering project

Part B: Course Detail

Teaching Period: Term2 2023

Course Code: MIET7549C

Course Title: Use workshop equipment and processes to complete an engineering project

Important Information:

Please note that this course may have compulsory in-person attendance requirements for some teaching activities.

To participate in any RMIT course in-person activities or assessment, you will need to comply with RMIT vaccination requirements which are applicable during the duration of the course. This RMIT requirement includes being vaccinated against COVID-19 or holding a valid medical exemption.

Please read this RMIT Enrolment Procedure as it has important information regarding COVID vaccination and your study at RMIT: https://policies.rmit.edu.au/document/view.php?id=209.

Please read the Student website for additional requirements of in-person attendance: https://www.rmit.edu.au/covid/coming-to-campus


Please check your Canvas course shell closer to when the course starts to see if this course requires mandatory in-person attendance. The delivery method of the course might have to change quickly in response to changes in the local state/national directive regarding in-person course attendance.

School: 520T Future Technologies

Campus: City Campus

Program: C6130 - Advanced Diploma of Engineering (Mechanical)

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 8311

Course Contact Email: amita.iyer@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Alan Bucksh
Ph: +61 3 9925 4153
E:  alan.bucksh@rmit.edu.au

Appointment by email

 

Kah Soo

Ph: 03 9925 4019

E:kah.soo@rmit.edu.au 

 

Bill Chau

Ph: 03 9925 4070 

bill.chau@rmit.edu.au 

 

George Zouev
Program Coordinator
Ph: +61 3 9925 4935
E: george.zouev@rmit.edu.au 

 

Nominal Hours: 60

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

Nil

Course Description

This unit of competency covers the identification and use of a range of common workshop equipment and processes to complete a simple engineering project. It also focuses on developing and applying basic workshop skills and developing knowledge about equipment and processes and relating it to typical technical work requirements.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

MEM30029A Use workshop equipment and processes to complete an engineering project

Element:

1. Research common engineering workshop equipment and processes

Performance Criteria:

1.1  Identify sources of professional, technical and trade assistance

1.2  Identify common processes and techniques for working, shaping and joining metal, alloys and others materials
 
1.3  Identify common engineering hand and power tools and their applications
 
1.4  Identify common workshop equipment and applications
 

Element:

2. Identify resources required to manufacture a simple engineered item

Performance Criteria:

2.1  Interpret design information from drawings and instructions
 
2.2  Select processes and techniques appropriate to task and level of skill
 
2.3  Identify required tools, equipment, material and services
 
2.4  Prepare a simple work plan showing operational sequences, work priorities and optimal use of time and resources

Element:

3. Use workshop equipment and processes to manufacture a simple engineered item

Performance Criteria:

3.1  Correctly prepare materials and equipment for the required operations
 
3.2  Use tools and machines safely and correctly
 
3.3  Follow work health and safety (WHS) procedures, standard operating procedures and supervisor instructions are correctly
 
3.4  Obtain assistance from appropriate persons in the event of problems and difficulties
 
3.5  Follow safe work practices and procedures
 
3.6  Implement hazard control measures, where practicable
 

Element:

4. Assess workshop equipment and processes to technical engineering activities and engineering design process

Performance Criteria:

4.1  Justify selected workshop processes in terms of design criteria
 
4.2  Assess selected tools and equipment for process safety and efficiency
 
4.3  Evaluate task and workshop processes against typical technician work activities


Learning Outcomes


Refer to Elements


Details of Learning Activities

You will be involved in the following learning activities to meet requirements for this course and stage 1 competencies for Engineering Associates:

• Lectures
• Tutorials
• Hands-on manufacturing: Sheet metal fabrication and Machining

Engineers Australia Mapping Information:

This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:

EA 1. Knowledge and Skill Base

EA 1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.

EA. 2. Engineering Application Ability

EA 2.1. Application of established technical and practical methods to the solution of well defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.

EA 3. Professional and Personal Attributes

EA 3.1. Ethical conduct and professional accountability
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanor.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.
 

Engineers Australia Stage 1 Competencies are mapped with competency MEM30029A in the Assessment Matrix.


Teaching Schedule

The proposed teaching schedule for this competency is detailed below:

 

Weeks Topics Delivered Element / Performance Criteria
1

Safety Induction. Workshop and OHS checklist, Emergency evacuation procedure, assembly points. Introduction to the projects. Hand and machine tools to be used in the making of the projects, Emergency button locations on the machines and around the workshop. Personal Protective Equipment,  workshop requirements.

Quick Quiz.
 

1.2, 1.3, 1.4, 3.4, 3.5
2 Sources of professional, technical and trade assistance, common processes and techniques for working, shaping and joining metal, alloys and others materials, common engineering hand and power tools and their applications, common workshop equipment and applications 1.1,1.2, 1.3, 1.4
3 Common alloys and others materials typically used in the workshop, common engineering hand and power tools and their applications, common workshop equipment and applications. Toolbox work: Interpret design information from drawings and instructions, Select processes and techniques appropriate to task, 2.1, 2.2, 2.3 2.4
4 Identify and select required tools, equipment, material and services, Prepare a simple work plan showing operational sequences, work priorities and optimal use of time and resources. Correctly prepare materials and equipment for the required operations, mark out parts of the toolbox, follow safe work practices and OH&S procedures.

Assessment 1: Due Week 4
 

3.1, 3.3, 3.4, 3.5, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
5 Cut and finish to size, fold, materials, drill and pop rivet parts as per drawing. 3.1, 3.2. 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
6 Cut and finish to size, fold, materials, drill and pop rivet parts as per drawing. 3.1, 3.2. 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
7 Assemble toolbox.  3.1, 3.2. 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
8 Start New practical exercise - Machining project. Project planning, drawing interpretation and manufacturing processes 3.1, 3.2. 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
9 Continue manufacturing of machining exercise 2.1, 2.2, 2.3 2.4, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
10 Continue manufacturing of machining exercise 2.1, 2.2, 2.3 2.4, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
11 Continue manufacturing of machining exercise. Assignment 2: Due Week 11 2.1, 2.2, 2.3 2.4, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
12 Continue manufacturing of machining exercise 2.1, 2.2, 2.3 2.4, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
13 Continue manufacturing of machining exercise 2.1, 2.2, 2.3 2.4, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
14  Continue manufacturing of machining exercise 2.1, 2.2, 2.3 2.4, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
15  Continue manufacturing of machining exercise Machining exercises completed. Assessment Task 4 : Due Week 15 2.1, 2.2, 2.3 2.4, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
16  Continue manufacturing of machining exercise 2.1, 2.2, 2.3 2.4, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
17 Assessment 3 (Pracs): Due Week 17. 2.1, 2.2, 2.3 2.4, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3
18 Student feedback. 2.1, 2.2, 2.3 2.4, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.1, 4.2, 4.3

Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is minimum 10 hours outside the class time.


Learning Resources

Prescribed Texts


References


Other Resources

Students will be able to access information and learning materials through myRMIT and may be provided with additional materials in class. List of relevant reference books, resources in the library and accessible Internet sites will be provided where possible. During the course, you will be directed to websites to enhance your knowledge and understanding of difficult concepts.

Personal Protective equipment requirements: Steel capped footware - Mandatory. Safety glasses are provided by RMIT but it is recommended that you buy your own pair.
 


Overview of Assessment

 The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:

 

Assessment 1: Assignment 1

Assessment 2: Assignment 2

Assessment 3: Toolbox and Soft Hammer

Assessment 4: Risk Assessment


These tasks assesses the following Course Learning Outcomes (CLOs):

 

Assessment Mapping Matrix

Elements/

Performance Criteria

 Assessment 1

 Assessment 2

Assessment 3

Assessment 4

1.1

X




1.2

X

X



1.3

X

X



1.4


X



2.1



X


2.2


X



2.3


X

X


2.4


X

X


3.1



X


3.2


X

X


3.3

X

X

X

X

3.4

X


X


3.5

X

X

X

X

3.6

X



X

3.7



X


3.8

X

X

X


3.9


X

X


4.1


X



4.2


X



4.3


X









Assessment Tasks

Assignment 1: Assignment 1 (OH&S / Hand Tools)

Assignment 2: Assignment 2  (Hand and cutting tools, Planning)

Assessment 3: Practical exercises  (Toolbox and Soft Hammer)

Assessment 4: Assignment 3 (Risk Assessment)

 
This course is assessed as Competent or Not Yet Competent.
To be deemed competent you must demonstrate an understanding of all aspects required of the competency.

You need to achieve satisfactory (S) results in all assessments to be deemed Competent (CA).

 

 

 


Assessment Matrix

Assessment vs MEM30029A Elements & Performance Criteria

MEM30029A Elements and performance criteria                  
Assessments 1.1 1.2 1.3 1.4 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.1 4.2 4.3
 Assignment 1  X  X  X  X  X    X  X  X  X
 Assignment 2  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X
Assignment 3  X  X  X  X
Assignment 4 X     X             X   X     X X   X  

 Assessment vs Engineers Australia Stage 1 Competencies

                 Engineers Australia Stage 1 Competencies
  EA 1.1 EA 1.2 EA 1.3 EA 1.4 EA 1.5 EA 1.6 EA 2.1 EA 2.2 EA 2.3 EA 2.4 EA 3.1 EA 3.2 EA 3.3 EA 3.4 EA 3.5 EA 3.6
Assignment 1      X      X          X        X  X
Assignment 2  X  X  X  X  X  X  X  X
Practical Exercises  X  X  X  X  X  X  X  X  X  X  X  X
Assignment 3     X     X   X   X X       X X
All Assessments MEM30029A  2  2  2  2 3 3 3 3  3  2
0 (Blank) Graduate attribute is not assessed
1 Graduate attribute is assessed in at least one but less than one-third, of the Element
2 Graduate attribute is assessed in at least one third but less than two-thirds of the Element
3 Graduate attribute is assessed in more than two-thirds of the Element

Other Information

Private study Hours are approximately 15 hours for this course.

 

Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:

  • Relevant
  • Current
  • Satisfies the learning/competency outcomes of the course

Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL

Study and learning Support:

Study and Learning Centre (SLC) provides free learning and academic development advice to you. 
Services offered by SLC to support your numeracy and literacy skills are: 

  • assignment writing, thesis writing and study skills advice 
  • maths and science developmental support and advice 
  • English language development 

Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support 

Equitable Learning Services (ELS):

If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).

Late submission: 

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager. 
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted. 
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date. 

Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked. 


Special consideration: 

Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration 

Plagiarism: 

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University. 

Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism. 

Other Information: 

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

Course Overview: Access Course Overview