Course Title: Produce an engineering design for a steel structure

Part B: Course Detail

Teaching Period: Term2 2021

Course Code: CIVE7794

Course Title: Produce an engineering design for a steel structure

School: 174T School of VE Engineering, Health & Science

Campus: City Campus

Program: C6162 - Advanced Diploma of Engineering Technology (Civil Engineering Design)

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vehs@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Anita Mehmi
Teacher
Future Technologies, Industry Cluster
College of Vocational Education
Building 57, Level 5, Room 34
RMIT University (City Campus)
115 Queensberry Street, Carlton South
VIC 3053, Australia
Tel: +61 3 9925 2011
Email: anita.mehmi@rmit.edu.au


Dr. Amita Iyer
Program Manager
Future Technologies, Industry Cluster
College of  Vocational Education
Program Manager
Tel: (03) 9925 8311
Fax: (03) 9925 4189
Email: amita.iyer@rmit.edu.au

Nominal Hours: 60

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

Nil

Course Description

This unit of competency describes the knowledge and skills required to complete an engineering project including the analysis and design of simple steel structures from first principles using appropriate design aids. The unit includes a ranges of relevant engineering calculations and design principles for a range of steel structure components


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

VU22551 Produce an engineering design for a steel structure

Element:

1. Identify steel structure to be designed

Performance Criteria:

1.1  Occupational Health and Safety/Workplace Health and Safety (OHS/WHS) requirements and environmental requirements for a given work area are determined.   1.2  Established OHS/WHS requirements and risk control measures and procedures are followed in preparation of the work area.   1.3  Safety hazards which have not previously been identified are documented and risk control measures devised and implemented in consultation with appropriate personnel.   1.4  Design requirements for the steel structure are identified from the design brief.   1.5  Appropriate personnel are consulted to ensure the work is co-ordinated effectively with others involved at the work site.   1.6  Resources and equipment needed for the task are obtained in accordance with enterprise procedures and checked for correct operation and safety.

Element:

2. Plan design approach

Performance Criteria:

2.1  Design project documentation is collected and analysed.   2.2  Design references and equipment are set up to complete the design, in accordance to relevant Australian standards regulations and enterprise procedures.   2.3  Decisions for dealing with unexpected situations are made from discussion with appropriate personnel, job specifications and enterprise procedures.

Element:

3. Complete the design

Performance Criteria:

3.1  The steel structure design is completed to conform to relevant Australian and/or local standards or regulations, in accordance with enterprise procedures.   3.2  Design references and equipment are used according to relevant Australian standards, manufacturer’s manuals and enterprise procedures.   3.3  Methods for dealing with unexpected situations are selected on the basis of safety and specified work outcomes.   3.4  Completed design is reviewed against job specifications with appropriate personnel and amended as required to provide optimum solution

Element:

4. Compile, document and present results

Performance Criteria:

4.1  Final design is presented and discussed with appropriate personnel
4.2  Design references and equipment are maintained and stored in accordance with enterprise procedures.
4.3  Results are stored and archived according to enterprise procedures.


Learning Outcomes


Refer to Elements


Details of Learning Activities

You will be involved in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates.
• Lectures 
• Tutorials
• Practicals
• Review questions
• Case projects
• Lab journal

Engineers Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:

EA 1. Knowledge and Skill Base
EA 1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.

EA 2. Engineering Application Ability
EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.

EA 3. Professional and Personal Attributes
EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.

Engineers Australia Stage 1 Competencies are mapped with competency VU22551 in the Assessment Matrix.
 


Teaching Schedule

The proposed teaching schedule for this competency is detailed below:

Week                                                                                          Topics Delivered Elements/Performance Criteria                                                  
1 Introduction to the course and OH&S requirements                                                                                                                               
 
1.1, 1.2, 1.3, 1.4, 1.5, 1.6
 2 Limit States Design of steel structures, Plastic and Elastic Design, Forms of steel structures, Typical steel members, Steel sections, Manufacturers’ catalogues, and introduction to AS 4100. 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3
3 Loads on Structures:
- AS 1170 Part 1 to determine design dead and live loads.
- Wind loads on buildings as per AS 1170 Part 2.
- Estimation of loads in steel strctures
1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3
4 Design of Metal cladding,Manufacturers’ tables and installation guides, AS 4100 provisions. 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3
5 Design of Purlins & Girts, Sectional properties of Purlins & Girts, Manufacturers’ tables and installation guides, AS 4100 provisions. 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3
6

Design of axially loaded members (Tension) - capacity calculation and AS 4100 provisions.

1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3
7  

Design of axially loaded members (Compression) - capacity calculation and AS 4100 provisions.

2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 4.1, 4.2, 4.3
8


 Quiz

2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3, 4.4
9 Design of Steel Beams - Introduction, Sectional properties and overall capacity calculation, AS 4100 provisions. 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3
10 Design of Steel Beams - localised failure, end restraints and Introduction, design for flexure, and AS 4100 provisions. 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3
11

Design of Steel Beams - use of stiffeners, design for shear and deflection, Welded plate girders and AS 4100 provisions.

Site visit / Guest lecture

2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3
12

Design of Steel Columns - sectional properties, short and long columns, and AS 4100 provisions.

Site visit / Guest lecture

2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 4.1, 4.2, 4.3, 4.4
13

Design of Steel Columns - subjected to axial load and biaxial bending, braced and unbraced columns, and AS 4100 provisions.


1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3
14

Connections: Bolted connections, analysis and design, AS4100 provisions

Project Submission

2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3
15 Connections: Welded connections, analysis and design, AS4100 provisions 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3
16 Design of Base plates: simple and moment connections. 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3
17-18 Test 1.1, 1.2, 1.3, 1.4, 1.5, 1.6,2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 3.4, 4.1, 4.2, 4.3


Learning Resources

Prescribed Texts


References


Other Resources

  • Multimedia Resource
  • Recommended Videos and DVDs
  • RMIT online learning resources are located on RMIT Online Learning Hub. Follow the link to log in
  • http://www.rmit.edu.au
  • The Learning Hub (CANVAS) is the central point of access to the online courses in which students are registered.


Overview of Assessment

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course, you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:

Assessment 1: Quiz

Assessment 2: Project

Assessment 3: Test

These tasks assess the following Course Learning Outcomes (CLOs):

Assessment Mapping Matrix

Element/Performance Criteria Covered  Quiz Project Test
1.1  x  x  x
1.2  x  x  x
1.3   x  x  x
1.4   x  x  x
1.5     x  
1.6     x  
2.1   x  x  x
2.2   x  x  x
2.3     x  
3.1   x  x  x
3.2   x  x  x
3.3   x  x  x
3.4   x  x  x
4.1   x  x  x
4.2   x  x  x
4.3   x  x  x


Assessment Tasks

Assessment 1: Quiz  (week 8)
Assessment 2: Project  (week 14)
Assessment 3: Test  (week 17-18)
 

This course is assessed as Competent or Not Yet Competent.
 
 


Assessment Matrix


Assessment vs VU22551 Elements & Performance Criteria

 

VU22551 Elements & Performance Criteria    

Assessments

1.1

1.2

1.3 

1.4 

1.5 

1.6 

2.1 

2.2 

2.3 

3.1 

3.2 

3.3 

3.4 

4.1 

4.2 

4.3 

 Quiz

 x

 x

 x

 x



 x

 x


 x

 x

 x

 x

 x

 x

 x

Project

 x

 x

 x

 x

 x

 x

 x

 x

 x

 x

 x

 x

 x

 x

 x

 x

Test

 x

 x

 x

 x



 x

 x


 x

 x

 x

 x

 x

 x

 x

Assessment vs Engineers Australia Stage 1 Competencies


Engineers Australia Stage 1 Competencies

Assessments

EA1.1

EA1.2

EA1.3

EA1.4

EA1.5

EA1.6

EA2.1

EA2.2

EA2.3

EA2.4

EA3.1

EA3.2

EA3.3

EA3.4

EA3.5

EA3.6


Quiz

 2

 2

 2

 1

 2

 1

 3

 3

 2

 1

 0

 1

 1

 2

 1

 0


Project

 2

 2

 3

 2

 3

 2

 3

 3

 3

 2

 2

 2

 2

 3

 2

 2


Test

 2

 2

 2

 1

 2

 1

 3

 3

 3

 2

 0

 1

 2

 2

 2

 0


All Assessments

VU22551

 2

 2

 2

 2

 3

 2

 3

 3

 3

 2

 1

 1

 1

 2

 2

 1


 0 (Blank)

Graduate attribute is not assessed.               


 1

Graduate attribute is assessed in at least one, but less than one-third, of the Element               


 2

Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element               


 3

Graduate attribute is assessed in more than two-thirds of the Element               


Other Information

• Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities. The estimated time is minimum 20 hours outside the class time.

Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:

  • Relevant
    • Current
    • Satisfies the learning/competency outcomes of the course

Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.
 

Study and learning Support: 

Study and Learning Centre (SLC) provides free learning and academic development advice to you. 
Services offered by SLC to support your numeracy and literacy skills are: 

assignment writing, thesis writing and study skills advice 
maths and science developmental support and advice 
English language development 

Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support 

Equitable Learning Services (ELS):

If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).

Late submission: 

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager. 
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted. 
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date. 

Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked. 


Special consideration: 

Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration 

Plagiarism: 

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University. 

Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism. 

Other Information: 

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

Course Overview: Access Course Overview