Course Title: Use communication network concepts and practices in manufacturing and engineering applications

Part B: Course Detail

Teaching Period: Term1 2020

Course Code: COSC7382

Course Title: Use communication network concepts and practices in manufacturing and engineering applications

School: 174T School of VE Engineering, Health & Science

Campus: City Campus

Program: C6162 - Advanced Diploma of Engineering Technology (Civil Engineering Design)

Course Contact: Program Manager

Course Contact Phone: +61 3 9925 4468

Course Contact Email: vehs@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Amandeep Kaur
amandeep.kaur@rmit.edu.au
Phone: +61 3 9925 4444

Noor Sateh
noor.sateh@rmit.edu.au
Phone:+61 3 9925 4013

 

George Zouev
Program Manager
School of Vocational Engineering, Health and Science (SVEHS)

By appointment only
Email: george.zourv@rmit.edu.au

 

 

Nominal Hours: 40

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

No licensing or certification requirements apply to this unit at the time of accreditation.   Pre­requisite - Nil

Course Description

This course describes the skills and knowledge in communication network concepts and practices that are used in manufacturing and engineering applications. Specifically, the unit covers the manner in which data traverses, networks, protocols, networking and communication devices, Internet Protocol (IP) addressing, routing protocols, troubleshooting logs and networking monitoring tools


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

VU22452 Use communication network concepts and practices in manufacturing and engineering applications

Element:

1. Define the function and operation of key communication network concepts

Performance Criteria:

1.1 Types of communication networks are defined 1.2 Data transmission in a communication network is explored 1.3 Physical communication network equipment and cables is identified 1.4 Methods, tools and infrastructure used to connect to the internet from a workstation are explored

Element:

2. Demonstrate the function and operation of key communication networking devices

Performance Criteria:

2.1 Physical and logical network representations of a local area network are implemented 2.2 Function and operation of network switches are described , and implemented 2.3 Function and operation of VLANs are described and implemented 2.4 Function and operation of network routers are described, and implemented 2.5 Function and role of a computer based interlocking device is described and applied 2.6 Function and operation of a firewall is described and applied 2.7 Function and operation of a wireless access point (WAP) is described, and implemented. 2.8 Operation of a network monitoring tool is described and applied 2.9 Function and operation of log files used for troubleshooting is described and applied

Element:

3. Install and set up a basic network

Performance Criteria:

3.1 Structure of an internetworking operating system (IOS) is defined in order to prepare a communication network device for operation 3.2 Cabling communication networking devices to a provided network diagram are performed 3.3 Configuring communication network addresses for a workstation is demonstrated and performed 3.4 A functional communication network is configured and tested

Element:

4. Establish protocols and models using OSI and TCP/IP

Performance Criteria:

4.1 Function and basic operation of key protocols in the Open Systems Interconnect (OSI) and Transmission control Protocol/Internet Protocol (TCP/IP) communication models are configured 4.2 Differences and commonalities between the OSI and TCP/IP models for a communication network are described 4.3 OSI Layer 1 standards and types of communication channels are described 4.4 OSI Layer 2 Protocols, standards and addressing (MAC addresses) for both LANs and WANs are described 4.5 IPv4 and IPv6 addressing schemes are configured 4.6 Function and operation of OSI Layer 3 Routed and Routing addressing protocols are described 4.7 Packet encapsulation and de-capsulation concepts are described 4.8 Function and operation of OSI Layer 4 Protocols are configured 4.9 Function and operation of OSI Layer 5 to 7 protocols and networking applications are described

Element:

5. Configure IP addressing schemes

Performance Criteria:

5.1 Sub-netting an IPv4 and IPv6 network is applied 5.2 Configuring IPv4 and IPv6 communication network addresses for a workstation is performed


Learning Outcomes


Refer to Elements


Details of Learning Activities

You will be involved in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates. 

  • Lectures
  • Practical laboratory testings and/or simulations
Elements and Performance Criteria for VU22452 (COSC7382) Use communication network concepts and practices in manufacturing and engineering applications   1.  Define the function and operation of key communication network concepts 1.1 Types of communication networks are defined 1.2 Data transmission in a communication network is explored 1.3 Physical communication network equipment and cables is identified 1.4 Methods, tools and infrastructure used to connect to the internet from a workstation are explored   2.  Demonstrate the function and operation of key communication networking devices 2.1 Physical and logical network representations of a local area network are implemented 2.2 Function and operation of network switches are described , and implemented 2.3 Function and operation of VLANs are described and implemented 2.4 Function and operation of network routers are described, and implemented 2.5 Function and role of a computer based interlocking device is described and applied 2.6 Function and operation of a firewall is described and applied 2.7 Function and operation of a wireless access point (WAP) is described, and implemented. 2.8 Operation of a network monitoring tool is described and applied 2.9 Function and operation of log files used for troubleshooting is described and applied   3.  Install and set up a basic network 3.1 Structure of an internetworking operating system (IOS) is defined in order to prepare a communication network device for operation 3.2 Cabling communication networking devices to a provided network diagram are performed 3.3 Configuring communication network addresses for a workstation is demonstrated and performed 3.4 A functional communication network is configured and tested   4.  Establish protocols and models using OSI and TCP/IP 4.1 Function and basic operation of key protocols in the Open Systems Interconnect (OSI) and Transmission control Protocol/Internet Protocol (TCP/IP) communication models are configured 4.2 Differences and commonalities between the OSI and TCP/IP models for a communication network are described 4.3 OSI Layer 1 standards and types of communication channels are described 4.4 OSI Layer 2 Protocols, standards and addressing (MAC addresses) for both LANs and WANs are described 4.5 IPv4 and IPv6 addressing schemes are configured 4.6 Function and operation of OSI Layer 3 Routed and Routing addressing protocols are described 4.7 Packet encapsulation and de-capsulation concepts are described 4.8 Function and operation of OSI Layer 4 Protocols are configured 4.9 Function and operation of OSI Layer 5 to 7 protocols and networking applications are described   5   Configure IP addressing schemes 5.1 Sub-netting an IPv4 and IPv6 network is applied 5.2 Configuring IPv4 and IPv6 communication network addresses for a workstation is performed


Teaching Schedule

 Week no  Topics Covered  Elements
 1-2

Lectures 

Chapter 1  How Networks Work? 
Chapter 2  Networks in Our Daily Lives

Labs

1.3.1.2 Lab - Building a Simple Network
1.3.2.4 Lab - Tracing Internet Connectivity
2.1.2.5 Lab - Determining the IP Address Configuration of a Computer

8.4.1.3 Packet Tracer - Using the Cisco IOS Show Commands

8.5.2.4 Packet Tracer - Configure Initial Router Settings

Quizzes

Chapter 1 and 2

 
 3-4  

Lectures 

Chapter 3 Communicating on a Local Network

Labs

3.2.2.4 Lab - Determine the MAC Address of a Host
3.4.3.5 Lab - Address Resolution Protocol (ARP)
3.4.4.3 Lab - IP Addresses and Network Communications
3.5.2.4 Packet Tracer - Learn to use Packet Tracer

Quizzes

Chapter 3
 
 5-6  

Lectures 

Chapter 4: Network Addressing

Labs

4.1.1.2 Packet Tracer - Connecting to a Web Server
4.3.3.3 Packet Tracer - Configure DHCP on a Wireless Router
4.1.4.4 Lab - Using Windows Calculator for Binary Conversions

Quizzes

Chapter 4
 
 7-8  

Lectures 

Chapter 5 Providing Network Services

Lab Test and Feedback on Test face to face on the same day.

 

Quizzes

Chapter 5
 
 9-10  

Lectures 

Chapter 6 Building a Home Network
Chapter 7 Network Security 

Labs

 

5.1.2.3 Packet Tracer - The Client Interaction
5.3.2.2 Packet Tracer - Observing Web Requests
5.3.1.3 Lab - Observing DNS Name Resolution 

 

Quizzes

Chapter 6 and 7
 
 11-12  

Lectures 

Chapter 8 Configuring Cisco Devices 

Labs

 

6.5.3.2 Packet Tracer - Configure Basic Wireless Security
8.1.2.4 Packet Tracer - Connect to a Switch via the Console Port
8.3.2.5 Packet Tracer - Navigating the IOS
8.4.1.3 Packet Tracer - Using the Cisco IOS Show Commands

 

Quizzes

Chapter 8
 
 13-14  

Lectures 

Chapter 9: Testing and Troubleshooting

Labs

8.5.1.3 Packet Tracer - Implementing Basic Connectivity
8.5.2.4 Packet Tracer - Configure Initial Router Settings
8.5.3.5 Packet Tracer - Configuring SSH



Quizzes

Chapter 9
 
15-16

Lectures

Revision on Chapter 1-9

Labs

9.2.2.2 Packet Tracer - Using the ipconfig command
9.2.3.3 Packet Tracer - Using the Ping Command
9.3.3.3 Packet Tracer - Troubleshooting a Wireless Connection
9.5.1.2 Packet Tracer - Putting it All Together

 
17

Final Test

 
18 Student feedback  


Learning Resources

Prescribed Texts


References


Other Resources


Overview of Assessment

Overview of Assessment

The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course, you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:

Assessment 1:Lab Test

Assessment 2: Final Test

 


Assessment Tasks

Assessment 1:Lab Test

Assessment 2: Final Test

 

 This course is assessed as Competent or Not Yet Competent


Assessment Matrix

Element/Performance Criteria Covered

Lab Test

Final Test

1.1

             X

X

1.2

             X

1.3

X

1.4

X

2.1

X

2.2

 X 

2.3

 X 

2.4

2.5

2.6

2.7

2.8

X

2.9

3.1

3.2

3.3

3.4

4.1

X

4.2

 X

4.3

4.4

4.5

4.6

4.7

4.8

4.9

5.1

5.2

Other Information

Student directed hours involve completing activities such as reading online resources, project work, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is 24 hours outside the class time.           

Credit Transfer and/or Recognition of Prior Learning (RPL):

You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:

• Relevant
• Current
• Satisfies the learning/competency outcomes of the course

Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL.

Study and Learning Support:

Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:

• Assignment writing, thesis writing and study skills advice
• Maths and science developmental support and advice
• English language development

Please refer to http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and Learning Support.

Equitable Learning Services (ELS):

If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).

Late Submission:

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for seven calendar days or less (from the original due date) and have valid reasons, you must complete an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.

The application must be lodged no later than one working day before the official due date. You will be notified within no more than two working days of the date of lodgement as to whether the extension has been granted.

Course Overview: Access Course Overview