Course Title: Design and develop electronics/computer systems projects

Part B: Course Detail

Teaching Period: Term2 2023

Course Code: EEET7413C

Course Title: Design and develop electronics/computer systems projects

Important Information:

Please note that this course may have compulsory in-person attendance requirements for some teaching activities.

To participate in any RMIT course in-person activities or assessment, you will need to comply with RMIT vaccination requirements which are applicable during the duration of the course. This RMIT requirement includes being vaccinated against COVID-19 or holding a valid medical exemption.

Please read this RMIT Enrolment Procedure as it has important information regarding COVID vaccination and your study at RMIT: https://policies.rmit.edu.au/document/view.php?id=209.

Please read the Student website for additional requirements of in-person attendance: https://www.rmit.edu.au/covid/coming-to-campus


Please check your Canvas course shell closer to when the course starts to see if this course requires mandatory in-person attendance. The delivery method of the course might have to change quickly in response to changes in the local state/national directive regarding in-person course attendance.

School: 520T Future Technologies

Campus: City Campus

Program: C6178 - Advanced Diploma of Electronics and Communications Engineering

Course Contact: Munir Muniruzzaman

Course Contact Phone: +61 3 9925 4415

Course Contact Email: munir.muniruzzaman@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Teacher
Sukhvir Singh Judge

Ph: +61 3 9925 4470
Email: sukhvir.judge@rmit.edu.au

Appointment by email

Program Manager
Eddie Vanda

Ph: +61 3 9925 4456
Email: eddie.vanda@rmit.edu.au

Nominal Hours: 40

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

none

Course Description

This course provides you with knowledge and skills required to design and develop an electronics/ computer system project. You will be provided opportunity to design, construct, record, evaluate and report on an electronics/ computer system design project. 

This course is delivered and assessed with the following: UEECS0012 - Design embedded controller control systems


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

UEEEC0011 Design and develop electronics/computer systems projects

Element:

1. Identify electronics/computer system project requirements

Performance Criteria:

1.1    Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
1.2    Hazards are identified, WHS/OHS risks are assessed, control measures and workplace procedures are implemented in preparation for work
1.3    Scope of proposed project design/development work is determined from design brief in consultation with appropriate person/s
1.4    Project work is planned to meet scheduled timelines in consultation with others involved on the worksite
1.5    Resources required for work are selected based on compatibility with project requirements and budget constraints
1.6    Tools, equipment and testing devices needed to carry out work are obtained and checked for correct operation and safety

Element:

2. Design and develop electronics/computer system

Performance Criteria:

2.1    WHS/OHS risk control work measures and workplace procedures are followed
2.2    Electronics/computer devices and systems and industry standards are applied to the design specifications
2.3    Alternative designs are considered based on the design brief
2.4    Safety, functional and budget considerations are incorporated in the design
2.5    Electronic/computer hardware and/or software systems are constructed and tested for compliance with design brief and regulatory requirements
2.6    Electronic/computer faults are rectified and retested to ensure effective operation of design
2.7    Project design specifications are documented for submission to appropriate person/s for approval
2.8    Solutions to unplanned situations are implemented in accordance with workplace policy

Element:

3. Obtain approval for electronics/computer system

Performance Criteria:

3.1 Electronic/computer system design is presented and explained to client representative and/or relevant person/s
3.2    Modifications to design are negotiated with relevant person/s within the constraints of workplace policy
3.3    Final project design is documented and approval obtained from appropriate person/s
3.4    Quality of work is monitored against performance agreement and/or workplace or industry standards

Learning Outcomes


On successful completion of this course you will have developed and applied the skills and knowledge required to demonstrate competency in the above elements


Details of Learning Activities

This course is delivered in a cluster (Microprocessor Applications 2) in conjunction with UEECS0012(EEET7445C). You must enroll in both courses delivered in this cluster. All the learning and assessment activities will include the components of both competencies UEECS0012 and UEEEC0011.

.


Teaching Schedule

As this course is delivered in cluster, please refer to the course guide Part B for course UEECS0012(EEET7445C) for the proposed teaching schedule.


Learning Resources

Prescribed Texts


References


Other Resources

As this course is delivered in cluster, please refer to the course guide Part B for course UEECS0012(EEET7445C) for the proposed teaching schedule.


Overview of Assessment

Assessment for this course is ongoing throughout the semester. Your knowledge and understanding of course content is assessed through participation in class exercises, oral/written presentations and through the application of learned skills and insights. Full assessment briefs will be provided and can be found on CANVAS


Assessment Tasks

As this course is delivered in cluster, please refer to the course guide Part B for course UEECS0012(EEET7445C) for the proposed teaching schedule.


Assessment Matrix

As this course is delivered in cluster, please refer to the course guide Part B for course UEECS0012(EEET7445C) for the proposed teaching schedule.

Other Information

Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:

  • Relevant
  • Current
  • Satisfies the learning/competency outcomes of the course

Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL

Study and learning Support:

Study and Learning Centre (SLC) provides free learning and academic development advice to you. 
Services offered by SLC to support your numeracy and literacy skills are: 

  • assignment writing, thesis writing and study skills advice 
  • maths and science developmental support and advice 
  • English language development 

Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support 

Equitable Learning Services (ELS):

If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).

Late submission: 

If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager. 
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted. 
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date. 

Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked. 


Special consideration: 

Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration 

Plagiarism: 

Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University. 

Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism. 

Other Information: 

All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.

Course Overview: Access Course Overview